diff --git a/plans/audio-fx-ux/README.md b/plans/audio-fx-ux/README.md index 1c5c0e6d7a..90335f3c09 100644 --- a/plans/audio-fx-ux/README.md +++ b/plans/audio-fx-ux/README.md @@ -46,6 +46,34 @@ So one plain name per *effect* is not enough: a preset's node needs its own preset node as well as on the effect. This is invisible in a catalogue of cards and obvious the moment every preset is drawn as the chain it actually builds. +## Family lettering, carried over from the first round + +The identity device from the first rack pass — different type per family — was +lost when the direction moved to schematic, which lettered everything in the +same condensed caps. It is back, inside the schematic skeleton rather than +instead of it. You can tell what KIND of module you are looking at with the +label out of focus, before the word registers. + +| Family | Treatment | Why | +| --- | --- | --- | +| Filter | condensed caps, wide tracking, light | measuring instruments | +| Dynamics | condensed caps, tight, heavy | grips the signal | +| Nonlinear | **italic serif** | the only generative family — it should not look like the others | +| Time | condensed caps, very wide, thin | atmosphere, not control | +| Smart | monospace, medium | it measures; it reads as a readout | + +Two faces, as budgeted. The condensed sans carries four families apart by +weight, case, tracking and size; the serif is spent on the single family that +behaves differently from the rest. + +Alongside it, a **tint step per module inside its family** — derived from +position in the registry, so adding an effect never re-colours its siblings by +hand. Two filters are visibly different modules without reading as two +different families. + +The `Broadcast` preset is the test case: seven nodes across three families in +one rack, and each one is identifiable before it is read. + ## The collapsed state is a sentence Collapsed is the most-seen state by a distance: a rack of six modules is six diff --git a/plans/audio-fx-ux/build-preview.mts b/plans/audio-fx-ux/build-preview.mts index 4f0e912953..163f8fde8b 100644 --- a/plans/audio-fx-ux/build-preview.mts +++ b/plans/audio-fx-ux/build-preview.mts @@ -33,6 +33,26 @@ const esc = (s: string) => s.replace(/&/g, "&").replace(/ = { filter: "var(--f-filter)", dynamics: "var(--f-dyn)", nonlinear: "var(--f-non)", time: "var(--f-time)", }; +/** + * A tint STEP per module inside its family — so two filters are visibly + * different modules without reading as two different families. Derived from + * position in the registry, so adding an effect never re-colours its siblings + * by hand. + */ +const FAMILY_BASE: Record = { + filter: [72, 0.15, 240], dynamics: [82, 0.14, 72], nonlinear: [70, 0.17, 26], time: [73, 0.15, 305], +}; +function moduleHue(id: string): string { + const def = getAudioFxDef(id); + if (!def) return "var(--f-filter)"; + const family = HF_AUDIO_FX.filter((d) => d.group === def.group); + const i = family.findIndex((d) => d.id === id); + const [l, c, h] = FAMILY_BASE[def.group] ?? FAMILY_BASE.filter!; + const span = Math.max(1, family.length - 1); + const t = i / span; + // Walk lightness and hue a little, keep chroma — the family stays obvious. + return `oklch(${(l - 6 + t * 12).toFixed(1)}% ${c} ${(h - 14 + t * 28).toFixed(0)})`; +} const PRESET_FAMILY_LABEL: Record = { voice: "Voice", repair: "Fix", character: "Character", space: "Space", }; @@ -52,7 +72,7 @@ const ruler = BANDS.map((b) => { /* ---- one module, in both faces ------------------------------------------ */ function moduleCard(def: (typeof HF_AUDIO_FX)[number]) { const c = EFFECT_COPY[def.id]!; - const hue = FAMILY_HUE[def.group] ?? "var(--f-filter)"; + const hue = moduleHue(def.id); const defaults = defaultAudioFxParams(def.id); const profile = PROFILES[def.id]; @@ -84,7 +104,7 @@ function moduleCard(def: (typeof HF_AUDIO_FX)[number]) { return `
-
+
${esc(c.title)}${esc(def.label)}
@@ -126,7 +146,7 @@ type StateOpts = { function stateSpecimen(effectId: string, params: Record, o: StateOpts) { const def = getAudioFxDef(effectId)!; const c = EFFECT_COPY[effectId]!; - const hue = o.smart ? "var(--mark)" : FAMILY_HUE[def.group] ?? "var(--f-filter)"; + const hue = o.smart ? "var(--mark)" : moduleHue(effectId); const profile = PROFILES[effectId]; const primaryLabel = c.primary === "strength" ? (profile?.label ?? "Amount") : (c.params[c.primary]?.label ?? c.primary); const summary = SUMMARY[effectId] ? SUMMARY[effectId]!(params) : ""; @@ -151,7 +171,7 @@ function stateSpecimen(effectId: string, params: Record, o: Sta ${rows}` : `
${esc(summary)}
`; - const body = `
+ const body = `
03
${esc(c.title)} @@ -195,7 +215,7 @@ function presetCard(p: (typeof HF_AUDIO_FX_PRESETS)[number]) { const nodes = p.nodes .map((n, i) => { const def = getAudioFxDef(n.type); - const hue = FAMILY_HUE[def?.group ?? "filter"]; + const hue = moduleHue(n.type); const c = EFFECT_COPY[n.type]!; // The one value that says what this stage is doing, in its own units — // the plain name carries the meaning, the number keeps it honest. @@ -206,7 +226,7 @@ function presetCard(p: (typeof HF_AUDIO_FX_PRESETS)[number]) { const pd = def?.params.find((x) => x.key === k); return `${v}${pd && "unit" in pd && pd.unit ? " " + pd.unit : ""}`; })[0] ?? ""; - return `
+ return `
${String(i + 1).padStart(2, "0")}
${esc(c.title)}${esc(shown)}
`; @@ -317,8 +337,37 @@ const html = `FX rack — the casual author's view border-radius:50%; background:oklch(12% .004 265); font-family:Monaco,monospace; font-size:9px; color:var(--h); display:grid; place-items:center; z-index:1; } .nmrow { display:flex; align-items:baseline; gap:7px; } - .nm { font-family:"DIN Alternate","Oswald",sans-serif; font-size:13px; text-transform:uppercase; - letter-spacing:.13em; color:oklch(92% .006 250); } + .nm { font-size:13px; color:oklch(92% .006 250); } + + /* ---- family lettering ------------------------------------------------ + The identity device from the first round, brought into the schematic. You + can tell what KIND of module you are looking at with the label out of + focus, before the word registers. + + Two faces, as budgeted: a condensed sans carries four families apart by + weight, case, tracking and size; a serif is spent on the one family that + is generative rather than corrective, because it is the one that behaves + differently. */ + .fam-filter .nm { + font-family:"DIN Alternate","Oswald",sans-serif; text-transform:uppercase; + letter-spacing:.18em; font-size:12px; font-weight:400; + } + .fam-dynamics .nm { + font-family:"DIN Alternate","Oswald",sans-serif; text-transform:uppercase; + letter-spacing:.04em; font-size:14px; font-weight:700; + } + .fam-nonlinear .nm { + font-family:"Superclarendon",Georgia,serif; font-style:italic; font-weight:700; + font-size:14.5px; letter-spacing:-.005em; text-transform:none; + } + .fam-time .nm { + font-family:"DIN Alternate","Oswald",sans-serif; text-transform:uppercase; + letter-spacing:.24em; font-size:12px; font-weight:300; opacity:.94; + } + .fam-smart .nm { + font-family:Monaco,ui-monospace,monospace; text-transform:uppercase; + letter-spacing:.05em; font-size:11.5px; font-weight:600; + } .tag { margin-left:auto; font-family:Monaco,monospace; font-size:8.5px; color:oklch(56% .012 250); white-space:nowrap; font-variant-numeric:tabular-nums; }