1148 Commits

Include renames

Author	SHA1	Message	Date
Miguel Ángel	ea7c48f372	fix(add): make chosen variables actually take effect, in the CLI and the preview (#3316) ... * fix(add): apply --vars to components, and explain a failed download Customising an item on the catalog page, copying the printed command and running it did nothing for a component. `--vars` was accepted, documented and then dropped: buildSnippet put the values on a block's mount element and returned a bare "paste from ..." comment for a component, so 221 of the 375 catalog items silently ignored every value the page produced. A component has no mount element to hang values on. It is markup pasted into a host, and it resolves values through __hyperframes.getVariables(), which merges the declared defaults of every [data-composition-variables] element in the document with render-time overrides. So the component's own declaration is the only place a chosen value can live and still be there after the paste. `add --vars` now rewrites those defaults. Blocks keep the mount attribute. Per-mount values are strictly better where a mount exists: the file on disk stays byte-identical to the registry's, so a later reinstall can still tell an edit from an update, and two mounts of the same block can differ. A value the item cannot accept is now refused rather than written. An out-of-range number or an unlisted enum value falls back at runtime and warns, so writing one would produce a file that renders exactly as if the value had been ignored -- the failure this change exists to remove. Ids the item never declared are reported too, instead of vanishing. Only the requested item is rewritten; a dependency dragged in behind it never declared these variables. Separately, `Install failed: fetch failed` is now a sentence. Item FILES are not cached (only manifests are), so a network blip surfaces as node's bare message with no URL and no cause, immediately after the user copied a command off a web page -- which reads as "the command was wrong" rather than "the network was". It now names what failed, says it is usually connectivity or a proxy rather than a bad command, and mentions HTTPS_PROXY. Also fixes the two transcribe tests that were failing before this branch. They assert the whisper soft-skip path but never pinned the engine, and `auto` picks Parakeet whenever parakeet-mlx is installed -- so on those machines the test shelled out to a real ASR binary, failed with "Parakeet did not produce output", and landed in the generic failure branch it claims is never taken. Pinned to `engine: "whisper"`, plus an assertion that the mocked transcribe actually ran, which is what stops the test passing on a machine without Parakeet while testing nothing on one with it. The file now runs in 18ms rather than 3.7s, because it no longer launches a subprocess. Test plan: 10 new tests for the rewrite (enum and range refusal, the numeric-string coercion the catalog URL depends on since every query value is a string, delimiter escaping, unparseable declarations) and 3 for the failure message. Full CLI suite: 2661 passed, ZERO failures. Verified as a user, not just in unit tests: installed blur-in with the exact reported command, confirmed the declaration carried 76 / accent / center, pasted it into a composition and ran `check` -- which reported canvas_overflow at 76px, which only happens if the baked size is really in effect. Bad values warn and are refused; blocks still emit data-variable-values. * fix(player): load the runtime before the body, not after Customising a component on a catalog page did nothing to the preview. badge-pop with count 10 and a green accent rendered 3, in red. The probe injects the runtime by appending a script to an already loaded document, and only once it has a reason to: a nested composition, or five polls with a timeline present. A component has neither. It is markup pasted into a composition, and it reads its values in an inline IIFE that runs while the body is parsing: var vars = window.__hyperframes && window.__hyperframes.getVariables ? window.__hyperframes.getVariables() : {}; With the runtime arriving afterwards that guard always took the empty branch, so the component used the defaults hardcoded in its own script and every chosen value was dropped. The values were never the problem: the preview sets window.__hfVariables correctly, and nothing was there to read it. prepareSrcdocForElement now puts the same runtime URL in the document's head before the srcdoc is set. A classic external script in head is parser-blocking, so it runs before body scripts without changing what gets loaded or adding a dependency the player did not already have. A CLI render never had this bug because the engine already orders it this way. Skipped when the page carries the runtime already, so a CLI-rendered page (which inlines it) does not get a second copy re-initialising the runtime underneath a live composition. The probe's late injection stays for the src= path, where there is no srcdoc to prepare. The runtime URL moved to its own module so the two injection points cannot drift apart. Test plan: 8 new tests for the injection (ordering against the reading script, head placement, both no-op guards, missing head/body, attributes on the head tag). Three srcdoc tests asserted byte-identical forwarding and now assert what they were actually protecting -- that the composition arrives intact -- plus the new runtime guarantee. player 338 passed, studio 4249 passed. Verified end to end against the real runtime and a real registry component, asking for size 96 / accent / right: before 52px, rgb(243,243,243), flex-start, runtime absent after 96px, rgb(60,230,172), flex-end, runtime present rgb(60,230,172) is #3ce6ac, the accent green. That is the reported bug before, and the chosen values after. * fix(add): name the registry and the real reason an install failed, and retry `Install failed: fetch failed` was two words that describe every network problem equally badly. Three things were missing, and each of them was the whole answer in a different case. The URL. undici throws with no URL attached, so a project that points `registry` at a private host in hyperframes.json got a message that looked like the public registry had failed. Naming the URL is the entire diagnosis there. The cause. undici buries the real reason one or two levels down in `cause`, and it was being dropped. The reported failure turned out to be `self-signed certificate in certificate chain`: a private registry whose certificate node refuses and curl accepts, which is why the host looked healthy from a terminal. That sentence tells the reader which knob to turn; `fetch failed` sends them to check a connection that is working. The retry. Item files are the one uncached path -- manifests fall back to a stale copy, but every install downloads its files fresh -- so a single blip killed the whole command. Now two extra attempts with short backoff, and deliberately NOT for TLS failures: a self-signed certificate fails identically every time, so retrying it only makes the user wait three times as long for the same message. Also retypes the declaration reader. It modelled variables as a local interface of six `unknown` fields and re-checked each one at every use. Core already owns this shape as a discriminated union and exports `isCompositionVariable`, the same predicate `parseCompositionVariables` filters with, so the union is used directly and the duplicate type is gone. A declaration the schema rejects now leaves the file untouched rather than being partially rewritten from guesses. Test plan: 4 retry and URL tests, 5 cause-chain tests, and the add-side tests now cover the custom-registry hint and its absence on the default registry. The variableDefaults fixtures gained the `label` the schema actually requires; without it they were not valid declarations, which the stricter reader caught. CLI suite 2671 passed, zero failures. Verified with the BUILT dist rather than the source, in the reporter's own project directory. The failure now reads: File fetch failed: https://<host>/registry/components/blur-in/blur-in.html - fetch failed (self-signed certificate in certificate chain [SELF_SIGNED_CERT_IN_CHAIN]) and once the project points back at the public registry the original command succeeds with `variables applied: size, tone, align`. * fix(registry): name the registry on the not-found path too The item-file failure now names the host it could not reach, but the sibling path did not. A project whose registry is unreachable at the MANIFEST stage got `Item "blur-in" not found - registry unreachable or empty`, which reads as the public catalog having lost the item and sends the reader to search a registry that never saw the request. Same fix, same reason, applied where the other three call sites live so one of them cannot stay behind: the message names the host and says it came from this project's hyperframes.json, and only when it is not the public registry, so the common case stays short. Test plan: 3 tests covering the private-registry hint and its absence on the default registry and on no registry at all. CLI suite 2674 passed, zero failures. Verified with the built dist against a host with a bad certificate: Item "blur-in" not found - registry unreachable or empty. Contacted https://self-signed.badssl.com/registry, set by this project's hyperframes.json, not the public registry. * fix(catalog): reconcile the two spellings of a compound word `countdown` returned exactly one item, the only thing tagged with that spelling. `count down timer` returned sixteen, and that one was in none of them. The tokenizer splits on word boundaries, so the two spellings of a single idea produced disjoint sets, and whichever phrasing an author happened to type decided which half of the answer they saw. Neither half was the whole answer: the one-word spelling hid count-up and decline-chart, which are the two things you would actually build with. Both directions now, each gated on the catalog's own vocabulary so this can only add signal. A query token is split when both halves are words the catalog uses, and adjacent tokens are joined when the compound is. A word in neither form, like `timer` which appears in no item, is left alone: this widens phrasing, it does not invent matches. Everything inferred this way carries a fraction of a real token's weight. That is the part worth keeping honest, because the first version relied on the halves being statistically common in a 375-item catalog, which is not the same as making them count for less. In a small corpus that version let `type` matching the name of `type-match-cut` outrank `typewriter` matching the name of `typewriter`: searching a word returned something that merely contained half of it. Two tests written against that real failure caught it. All spellings now return the same 17 items, and each still ranks its own exact match first: `countdown` leads with yt-circle-pointer, `count down` leads with the two-word items, and count-up and decline-chart appear in both. Test plan: 6 new tests covering both directions, the identical-set property that was the actual defect, exact-match precedence, an unknown word left alone, and the typewriter case. Eval set unchanged at 33/39 top-1 and 39/39 top-3, so no query regressed. CLI suite 2680 passed.	2026-08-17 20:31:37 -04:00
James Russo	232686f7e0	chore: release v0.8.0 (#3318)	2026-08-17 17:06:28 -07:00
Miguel Ángel	4403b8beef	chore: release v0.7.111 (#3315)	2026-08-17 17:34:58 -04:00
Miguel Ángel	6b17c24f98	fix(catalog): rank on where a word appears and how rare it is (#3312) ... * fix(catalog): rank on where a word appears and how rare it is Word search returned the right move in the top three for 87% of a 39-query eval set built from real catalog intents. Three defects, all in the same 75-line scorer, and all found by running the queries rather than by reading the code. A token matching an item's NAME counted exactly as much as one buried in a description. Searching "typewriter effect on a title" ranked the item literally called `typewriter` seventh, behind entries that merely mention typing. Name and title now carry three times the weight: an author who types a move's name is giving the strongest signal available and it was being averaged away. Plurals shared no vocabulary with the singular. "a stat that counts up and then pulses once" matched nothing in a description reading "lands with a restrained scale pulse", because `counts` is not `count`. Adding detail to a query made results strictly worse, which is the opposite of what a search should do. Plurals now fold, and only plurals: Porter would fold `counter` to `count` and `values` to `valu`, merging moves that mean different things. Field weighting alone made one case worse, which is why inverse document frequency is here too. "reveal a headline one line at a time" put every item merely NAMED `*-reveal` on top, because one strong hit on the catalog's most common word outscored several weak hits on the words that actually narrowed it down. Rarity now scales each term. Separately: a query in a script this ranker cannot index no longer reports itself as an empty catalog. Tokenising on [a-z]+ leaves nothing of a Japanese query, and returning "no items match" told the author the catalog lacked a move it may well have, then invited them to file a gap report about it. That case now says what actually happened and withholds the gap prompt, since nothing was searched. Measured on the same 39 queries, before and after: top-1 31/39 (79%) -> 33/39 (85%) top-3 34/39 (87%) -> 39/39 (100%) Test plan: 13 new tests, each a real failing query reduced to the smallest fixture that still reproduces it. Existing tests migrated to the fields API (two callers total). Full CLI suite 2643 passed, 2 pre-existing transcribe failures unchanged. Verified against the real CLI: "typewriter effect on a title" now returns typewriter first, and "chat conversation between a user and an assistant" returns chat-message, chat-thread, ai-chat-reveal instead of transitions-blur. * docs(skills): say to query the catalog in English The runtime message added alongside this explains an unsearchable query after the fact. Saying it up front is cheaper: an agent that never writes the query in Japanese never sees the error, never wastes the turn, and never files a gap report about a component that exists. Worth stating rather than assuming, because the mistake is a reasonable one. On a Japanese or Chinese project the brief, the narration and the captions are all in that language and the query naturally follows. The rule is that the query language and the video language are unrelated: describe the move in English, write the on-screen copy in whatever the video needs. Both skills that own `catalog --query` carry it, and those are the only two that mention the command at all. * fix(catalog): fail a non-English query instead of returning nothing The message explaining an unsearchable query went to stdout and the command exited 0. An agent that checks the exit code, which is most of them, read that as "searched successfully, the catalog has nothing" and went off to hand-author a move that is sitting in the registry. The explanation only helped a human who happened to be reading the terminal. It is bad input, not an empty shelf, so it now behaves like one: the guidance goes to stderr and the command exits 1, matching what an invalid --type already does. A genuine empty result, where the query parsed fine and the catalog simply has nothing, still exits 0 -- that distinction is the whole point, and both halves are pinned by tests. The wording now also says what to do rather than only what happened: search in English, and let the on-screen copy of the video stay in whatever language it needs. That was the part agents were getting wrong, since a Japanese project makes a Japanese query feel natural. Test plan: 3 new tests covering the exit code, the wording, and the genuine-empty case that must stay at 0. Also asserts the gap-report line is absent, since nothing was searched and a report there is noise in the one signal that tells us what to build. catalog.test.ts 32 passed; commands + registry suites 887 passed with the 2 pre-existing transcribe failures unchanged. Verified against the real CLI: a CJK query exits 1, a genuine miss exits 0.	2026-08-17 17:20:22 -04:00
Miguel Ángel	5e36f7ac54	chore: release v0.7.110 (#3303)	2026-08-17 15:11:38 -04:00
Miguel Ángel	37f8c48449	fix(catalog): survive an unreachable registry, and ask for the gap (#3299) ... Serve an expired registry cache when revalidation fails, so one timeout against the registry host no longer reports the whole catalog as unreachable while a usable copy sits on disk. Hand back the gap-report command at the moment a search comes back wrong: catalog --query prints it pre-filled on both tiers, and every --json search envelope carries it as report_gap. Report on either tier, since the on-device tier needs a consented download and every gap reported to date came from the word tier. Document the gap channel in the registry skill, which owns hyperframes catalog and never mentioned it, and name the CLI commands no skill did.	2026-08-17 14:55:17 -04:00
Vance Ingalls	de4062a933	fix: create temp dirs with mkdtemp, not a name built from Date.now() (#3241) ... * fix: create temp dirs with mkdtemp, not a name built from Date.now() Closes nine open `js/insecure-temporary-file` alerts — the technically correct ones. An audit of all 29 open alerts for that rule split them three ways: - 19 false positives: the write lands inside a directory the caller already made with `mkdtempSync`, and CodeQL's dataflow reaches `tmpdir()` without seeing the mkdtemp in between. - 1 mitigated: `fontCompression.ts` writes with `flag: "wx"` and only takes the tmpdir branch inside Lambda, where /tmp is single-tenant. - 9 real, and these are them. A name built from `Date.now()` under the shared temp dir, followed by `mkdirSync`, is guessable to the millisecond AND leaves a window between choosing the name and creating it, so on a shared machine another user can pre-create or symlink the path first. `mkdtempSync` closes both halves: it picks the random suffix and creates the directory 0700 in one syscall. Same shape, one line shorter, and the alerts go away rather than being dismissed. Six sites in `normalize.test.ts` (its `mkdirSync` import goes with them), one in `generate-catalog-previews.ts` — that single construction accounted for three alerts, since the other two were writes into the directory it made. No shared helper. `mkdtempSync` is already the stdlib primitive for exactly this, and the two callers live in different packages, so a wrapper would need a home in core to serve one CLI test and one build script — more indirection than the line it saves. Deliberately not touching the other 20: excluding the rule repo-wide would hide this class of bug from future code, which is the reason these are fixed rather than silenced. * fix: track the wav temp dir for cleanup and finish the mkdtemp sweep The wav helper pushed the file path into `dirs`, so `afterEach` removed `tone.wav` and left the directory it had just made — four per suite run. Push the directory and derive the file path from it. Measured: the old code leaks 4 directories per run, the new code leaks 0. Three sites still built a predictable name and then created it. CodeQL never flagged them — its dataflow reaches the template preview writes through a `readdir` walk and does not connect them back to the `tmpdir()` root — so the alert list was narrower than the pattern, and closing only the alerts would turn the rule green while the shape survived where nothing would re-flag it. `generate-template-previews.ts` is the near-twin of the file this change started from, and the other two are producer dev entry points. All three use the path only through the variable, so the random suffix changes nothing. Catalog previews now call the existing `createCatalogPreviewTempDir` instead of repeating its body. That test was in no runner, so it pinned uniqueness and mode 0700 on a function nothing called; adding it to `test:scripts` alongside a real caller makes it load-bearing. The rationale for the primitive moves to the helper, which is now the only place it lives. * ci: re-run catalog previews when the temp-dir module changes Routing the renderer through `createCatalogPreviewTempDir` made that module part of its runtime path, and the workflow already states the rule for the sibling case: a module the renderer imports has to appear in the trigger, or a change to it alone never re-runs the job that exercises it. Add it to the `paths:` filter and to the renderer canary, so a PR touching only the temp-dir allocation still renders both shape canaries. Verified against this branch's own range: the previous argument list does not report the file, so a helper-only PR was invisible to both checks.	2026-08-14 11:20:37 -07:00
Miguel Ángel	12fd6d9087	chore: release v0.7.109 (#3273)	2026-08-14 10:21:26 -04:00
Miguel Ángel	532caf7aa2	chore(catalog): remove internal source markers	2026-08-13 21:10:12 -04:00
James Russo	f7d2260f9d	feat(engine): stamp rendered files with hidden renderer provenance (#3264) ... * feat(engine): stamp rendered files with hidden renderer provenance * fix(engine,producer): re-assert provenance at every container writer Review found that a no-audio MOV render still shipped untagged. The concat step is the last container write on that path (mux is skipped without audio, and applyFaststart only copies mov/webm), and the concat demuxer does not carry the chunks' container metadata through. The same hole applies to no-audio WebM, and to the in-process chunked encode in chunkEncoder, not just the distributed assemble path. mp4 was masked throughout because applyFaststart re-runs ffmpeg for that format and re-tagged the output. Tags the four remaining writers: the chunked-encode concat, and assemble's single-chunk remux, concat and cfr re-encode. Also corrects the trust claim. These are unsigned, freely writable keys, so a present tag means the file claims to be HyperFrames output, not that HyperFrames wrote it. Documented as an unauthenticated diagnostic hint rather than an authenticity or attribution boundary. Tests assert on the assembled file through the real assemble() path for both mov and webm; both fail without the concat fix. * test(engine): pin provenance through the in-process chunked concat Review noted the distributed writers are mutation-pinned but the encodeFramesChunkedConcat fix had no real-file regression of its own. Encodes 70 frames at a 30-frame chunk size so the concat step actually runs, then asserts the tags on the resulting no-audio mov. Fails without the concat fix, passes with it.	2026-08-13 16:32:09 -07:00
Vance Ingalls	9ba528914d	chore: release v0.7.108 (#3265)	2026-08-13 15:11:20 -07:00
Vance IngallsandClaude Sonnet 5	d6c4774ef4	feat(studio): instrument the audio FX rack, including work an agent did (#3229) ... * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. * refactor(studio): break up the FX rack's largest functions and files Fallow flagged 9 complexity findings and 2 file-size violations after the telemetry stack landed. Extracts FxPresetRun, FxAddMenu, FxRackChain, FxNodeOpenBody, FxNodeParams, and useFxAudition/useFxCarve/useFxLevelling/ useFxChainObserved out of propertyPanelFxSection.tsx and propertyPanelAudioFxGroup.tsx, splits propertyPanelFxNodeRow.tsx's open-face rendering into its own component, and dedupes a clone in studioTelemetry.ts. Pure structural move — no behavior change; full test suite still green. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-13 15:05:51 -07:00
Vance IngallsandClaude Sonnet 5	ea0344122c	fix(engine): duck before quantising, chunk the PCM, reschedule on rate change (#3174) ... * fix(core): remove the build-audio-fx-runtime.ts stray resurrected by a main merge An earlier merge with main brought this deleted file back (git's merge/delete handling on an unchanged-on-one-side file); package.json already points at build-inline-artifact.ts, so it sat unreachable and duplicating that file's config, both of which fallow flagged. * fix(studio): pull TimelineLanes under the 600-line cap TimelineLanes.tsx hit 620 lines. Extracted the three per-clip pointer gestures (resize-start, pointer-down move-arm, click/razor-split) into createClipGestureHandlers — one factory call per rendered clip instead of ~120 lines of inline handler bodies in the render loop. 529 lines now. * fix(studio): split the extracted pointerdown handler under the CRAP threshold Moving the ~120-line gesture logic into timelineClipGestureHandlers.ts concentrated it into two functions fallow flagged (onPointerDown at CRAP 63.6, onResizeStart at 31.6). Split the decision logic (which gesture a pointerdown implies) into a pure resolvePointerDownAction, then split its own intent-blocking check into isIntentBlocked. onResizeStart's guard moved into canStartResize. Every function now scores under 30. * fix(studio): drop the unused DomEditSelection import in PropertyPanelFlat CI caught it on PR #3026 (wa-12-panel-params); a later refactor in the stack removed the last use of the type here without removing the import. * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * fix(studio): stop the single-candidate auto-apply carve firing twice Two auto-apply effects both fire when sourceOptions.length === 1: the multi-candidate effect only guards length === 0, so a single candidate passes it too, and the single-candidate effect passes its own guard right after — both compute the same sources list and both call setCarve, so the common case (one narrator, one bed) triggered two decodes, two FFT runs, and two concurrent attribute writes for one decision. The multi-candidate effect now defers to its sibling for exactly one candidate, which already has its own detailed handling for that case. Review by Miga (PR #3213). * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. * fix(cli): stop render.test.ts from downloading a real browser The "render command explicit composition" test drives the full render.js command handler, which takes the plan-based execute.ts path instead of the renderLocal path the other tests in this file exercise. That path calls ensureBrowser directly, bypassing the mocked preflight.js, and performs a real network install of chrome-headless-shell into the shared ~/.cache/hyperframes/chrome cache as a side effect of running the test suite. In CI this raced with the engine's audioFxRender browser tests running in a parallel worker against the same HOME, producing an intermittent EACCES on the partially-installed binary. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-13 05:23:40 -07:00
Vance IngallsandClaude Opus 5	56d8df65ca	docs(skills): add /hyperframes-audio, and key the waveform cache by file (#3211) ... * feat(studio): show every automated knob at the playhead, and carve as one module An automated parameter has two values: the number sitting in the chain, which is only the seed a lane replaced, and the number the envelope is on right now. The second is the true one, so the panel shows it — on the carve rack's readouts and on every effect's own fader and number field. A rack that showed the seed stood still while the carve was audibly working. Off the clip it keeps sampling rather than falling back to the stored number: a lane holds its first value backwards and its last forwards, so before the clip starts it already knows what it will open on, and the stored seed is a value nothing will ever play. Showing it made the fader jump the moment the clip came under the playhead. The playhead comes off the liveTime channel, throttled to 30 Hz — the RAF loop deliberately keeps frames out of the store, so a panel watching only the store would sit still for a whole take. PropertyPanel had that subscription inline; it is now one shared hook with two callers. Readouts reserve the width their parameter can need rather than what its current value takes, because an updating value one character narrower shunted everything after it sideways 30 times a second. The carve's effects are presented as one module: an author switched on a carve, and the peaking filters plus the level stage are how it is built, not six things to remove one at a time. Opening it lists every member's settings as readouts, since strength is what sets them. No carve control is offered on a track another track already carves against — that track is the voice, not the bed. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio-server): key the waveform cache on the file, not just its path Two takes written to the same path returned the first one's waveform, so a re-recorded track drew the shape of the audio it replaced. The key now carries size and mtime, which is enough to notice the bytes changed. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * feat(engine): render audio FX in an OfflineAudioContext Reads `data-fx-chain` off an audio element and runs the chain over the trimmed WAV before volume automation is baked in — effects should see the raw signal, and the envelope belongs on their output. The processing happens in an OfflineAudioContext inside the headless browser the engine already drives, running the same graph builders the studio previews with. That is the point of the approach: one implementation per effect, so the render agreeing with the preview is a property of the architecture rather than a tolerance to police. Reimplementing each effect as an FFmpeg filter would mean two implementations to keep in step, and for the dynamics processors and modulated delays there is no filter that behaves the same way. `build:audio-fx-runtime` bundles the graph builders into an injectable IIFE, following the same pattern as the existing runtime artifacts, so the browser runs exactly the code the studio does. The page loads from a file:// URL rather than about:blank because AudioWorklet is only exposed in a secure context — the compressor, limiter, gate and bitcrush processors would otherwise fail to register with an opaque error. file:// qualifies and needs no listening socket. The chain is serialised into the attribute the way colour grading carries its config, so there is no side-car file to resolve or lose. An FX failure is fatal for the whole mix rather than a per-track soft failure. Every other audio failure mode degrades gracefully — the track drops, siblings continue — but substituting the dry signal for a processed one ships a render that sounds plausible and is not what the author set up. Since the per-element work races under Promise.all, an internal AbortController chained off the caller's signal aborts in-flight siblings before workDir is removed. * feat(core): voiceover carve analysis Finds the bands a voice occupies so a music bed can be dipped there, letting the voice sit in front without ducking the whole track. Carve is a relationship between two tracks rather than an effect on one, so it stays out of the FX chain. What it emits is an ordinary chain of peaking filters, so a carve composes with whatever else is on the track and needs no separate rendering path. Selection is weighted toward intelligibility rather than raw voice energy. Ranking purely by power lands on the fundamental almost every time, because that is where a voice is loudest — but the masking that actually hurts a voiceover happens higher up, and dipping 160 Hz mostly just thins the bed. The bias is a control, not a constant: at 0 it follows raw energy, at 1 it weights toward 1-3 kHz. Ranking happens in dB, which matters more than it looks. Speech spreads 20-30 dB across these bands — it falls off roughly 6 dB per octave above the fundamental — so a weighting has to be on that scale to move anything at all. A multiplicative weight of `1 - bias + bias * shaped` is bounded below by `1 - bias`, capping its influence at 10*log10(1/(1 - bias)): 5.2 dB at the 0.7 default, 3 dB at 0.5. That is no influence against a real voice — every bias short of ~0.95 would rank exactly like bias 0 and carve the fundamental, the outcome the bias exists to prevent, while looking decisive against a fixture whose bands sit 2 dB apart. So the bias is a dB penalty, zero at 2 kHz and worth up to 30 dB at full strength, and relative cut depths come from a dB difference rather than a ratio of weighted linear powers. The bias reweights ranking without overriding the spectrum — a band the voice has no energy in is not worth carving, and scores -Infinity rather than competing — so a strongly low-pitched voice can still select low at full bias. What the tests hold is that biasing never selects lower than the unbiased ranking, that the DEFAULT bias reaches the presence region on a voice with a realistic tilt, and that bias 0 still follows raw power exactly. Includes a radix-2 FFT rather than a dependency; one Welch-style averaged spectrum over third-octave bands does not justify pulling in a DSP library. * fix(engine): keep the FX render 16-bit, stereo, and correctly sized Three defects in the offline FX path, none of which any test could see. **Float output silently disabled sample-accurate volume automation.** The writer emitted 32-bit IEEE float; the very next mixer step bakes the volume envelope into the samples and accepts only 16-bit PCM, returning null otherwise. So enabling any effect downgraded that track to the ffmpeg expression path — capped at 32 straight segments, quantising a curved envelope, and on a dense one falling back to base volume. It now writes 16-bit PCM, clamped rather than wrapped so a limiter at 0 dB or a resonant filter cannot turn overshoot into a click. A test asserts the baker accepts the writer's own output and actually fades it. **Everything was folded to mono.** `prepareAudioTrack` goes out of its way to emit stereo — its pan filter exists to dodge ffmpeg's 3 dB mono-to-stereo rematrix — and this folded it, then wrote one channel. So adding a single peaking EQ collapsed a bed's width and cost ~3 dB in the render, while preview stayed stereo. Channels now travel as one plane each, through an OfflineAudioContext of the same width, and come back interleaved. **Small results decoded the wrong length.** `new Float32Array(buf.buffer)` discards byteOffset and byteLength, and Node pools small allocations: a 400-byte payload sits at offset 8 inside an 8 KiB pool, so a clip under ~1024 samples decoded as 2048 samples of unrelated memory — and the empty-result guard could not see it. The reader has the mirror-image fix: a float data chunk on an odd boundary (ffmpeg's pcm_f32le writes fmt(18) + fact, landing `data` at 58) now copies instead of throwing RangeError on an unaligned view. The tail limitation is now stated rather than mis-stated: the context is exactly as long as the input, so a reverb or delay still ringing is cut there. The old comment claimed the opposite. How far a tail may run past a clip's end changes the clip's length in the mix, so it is a product decision, not one to make here. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(producer): report an FX render failure as an audio error `processCompositionAudio` reports per-track failures in its result, but an FX failure it cannot degrade past — a browser that will not launch, a chain that will not build — rejects instead. `runAudioStage` had no try, so that rejection escaped to the orchestrator as an unclassified pipeline exception, losing the stage/owner/retryable classification this stage exists to attach, and skipping its abort check on the way out. It now lands in `audioError` alongside every other cause, while an abort still keeps its own shape rather than being reported as an audio problem. Not done here: committing the generated `audio-fx-runtime-inline.ts` so a fresh clone typechecks packages/engine without building first. The bundle is built from the stub, and the stub changes three times across this stack — so the artifact differs per branch and would conflict on every restack. Its model, position-edits-render-inline.ts, is committed only because it is stable. Building before testing is this monorepo's existing contract (studio's tests need core's dist too), so the gap is not specific to audio FX and is better closed by a build ordering gate than by committing a per-branch artifact. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * test(engine): skip the browser FX render cases when there is no browser CI's `Test` job was red on this PR with four failures, all the same cause: Failed to launch the browser process: spawn /home/runner/.cache/hyperframes/chrome/chrome-headless-shell The job installs ffmpeg and no browser, deliberately — every other suite that needs an external binary already guards on it (`describe.skipIf(!HAS_FFMPEG)`). These cases were the only ones assuming a Chrome, so they failed on an absent dependency rather than on anything about the code. Guards on `resolveHeadlessShellPath()` — the same resolver `acquireBrowser` launches through, so the check cannot drift from the thing it guards the way a hard-coded cache path would. A configured path that does not exist throws; that is caught and read as "cannot run here". Checked both directions rather than just the green one: with a browser all 11 cases run and pass, and with `HYPERFRAMES_BROWSER_PATH` pointed at a missing binary exactly 3 skip and the other 8 still run. A guard that silently skipped everything would have looked identical in CI. They keep their value where it exists — every developer machine, and any job that has run `hyperframes browser ensure`. Not touched: the CodeQL failure on this PR is a run from 2026-08-07, five days and several force-pushes stale. None of the 17 open repo alerts are in files this PR changes; it re-runs on this push. * chore(engine): suppress the temp-file alert with the reason it is safe CodeQL flags `writeWav`'s `writeFileSync` as js/insecure-temporary-file (high) — the one new alert on #3021, and the reason its CodeQL check is red. It is a false positive, and the comment says why rather than just silencing it: `path` is always inside a directory made by `mkdtempSync`, never a name assembled directly under `tmpdir()`. Both callers are covered — the browser host page writes into `mkdtempSync(join(tmpdir(), "hf-fx-host-"))`, and the render output goes to the producer work dir, itself `mkdtempSync(join(tempRoot, "producer-project-"))`. mkdtemp picks the random suffix and creates the directory 0700 in one syscall, so the predictable filename inside it cannot be pre-created or symlinked by another user, which is the attack the rule is about. The analyzer sees the dataflow reach `tmpdir()` and not the mkdtemp in between. Suppressed inline rather than dismissed in the UI, so the justification lives next to the code and the rule stays live for anything added later in this file. Matches the repo's existing convention — `planV2.ts:222` carries an `lgtm[js/insecure-temporary-file]` for a different reason on the same rule. Correcting myself: I first reported this alert as not real, having intersected the PR's files against the default-branch alert list, which does not contain PR-ref alerts. Querying ?ref=refs/pull/3021/merge returns it straight away. * test(engine): probe ffmpeg and Chrome instead of assuming them Two failures on #3021's Test job, both about the environment rather than the code under test. **Bare `ffmpeg` is not on PATH in CI.** The 16-bit fixture shelled out to `execFileSync("ffmpeg", ...)` and died with ENOENT. The job does provide ffmpeg, through `prepare-ffmpeg-bin`, which is what `getFfmpegBinary()` resolves — every other ffmpeg-dependent suite in this package already goes through it. Now this one does too, and the case is `skipIf(!HAS_FFMPEG)` so a contributor without ffmpeg skips rather than fails. **The browser guard trusted the wrong thing.** It asked `resolveHeadlessShellPath()` and treated a returned path as "a browser is here". CI's cache holds a chrome-headless-shell that resolves and then fails to spawn — a partial download is indistinguishable from a working one by `existsSync`, which is all that resolver checks. So the three browser cases ran anyway and failed on the launch. It now runs `--version` and requires exit 0, which is the same probe the ffmpeg suites use: ask the binary, do not infer from the filesystem. Checked both directions rather than just the green one. With a working browser all 11 cases run and pass; with `HYPERFRAMES_BROWSER_PATH` pointed at a binary that exits non-zero — CI's exact situation — exactly 3 skip and the other 8 still run. A guard that quietly skipped everything would have looked identical on the CI summary. * feat(core): register the audio-fx-rack canary at 0% Lands the rollout switch dark, per the registry's own procedure: "Start at percentage: 0 and merge that — a canary at 0 is dead code you can land safely and ramp without a code review." Declared at the bottom of the stack so every branch above can read it. The gate itself goes in at wa-4-fx-panel, where the rack first appears. Scope is deliberate and stated in the description: it gates the AUTHORING surface only. A composition that already carries `data-fx-chain` still plays and renders it. A canary should stage who can REACH a feature, not make an attribute somebody already wrote silently inert — an agent that writes a chain through the skill would otherwise produce a file whose audio processing vanishes with no error. * feat(studio): audio FX panel generated from the registry Controls for the whole chain: add, remove, reorder, bypass, and every knob each effect declares. Nothing in the panel knows what a compressor is. The registry supplies each parameter's range, step, unit and scale and the panel renders what it finds, so adding an effect or a knob upstream needs no change here, and the panel cannot offer a value the renderer would reject — a typed-in figure is clamped into the declared range on the way through. Frequency and time controls span three or four decades, so those declare a log scale and the slider maps exponentially; a linear slider would spend most of its travel somewhere useless. Reorder is a first-class control because chain order changes the sound: a reverb before a compressor is not the same as after. Carve gets its own block rather than an entry in the add menu, with a picker for the voice track to listen to. It processes this track based on another one, which is how a sidechain control works — it lives on the track that changes, and names the source. * feat(studio): show the Audio FX section on audio tracks Adds `audioFx` to the editing-affordances contract and renders the FX panel in the inspector when an `<audio>` element is selected. The section is audio-only. A `<video>` carries its sound on a separate `<audio>` element, so an FX chain on the video would have nothing to process. Chain and carve settings are written straight back onto the element as serialised attributes, the way colour grading carries its config, so persistence is an ordinary attribute write and needs no new server route. A chain that cannot be parsed renders as empty rather than breaking the panel, and the attribute is left untouched until the user changes something. The collapsed group summarises what is on the track ("2 effects + carve") so the state is visible without expanding it. Wired into PropertyPanelFlat rather than PropertyPanel: STUDIO_FLAT_INSPECTOR_ENABLED defaults to true, so the flat inspector is what actually renders. * refactor(studio): lift audioFxSummary out of PropertyPanelFlat `PropertyPanelFlat.tsx` is 612 lines here against the repo's 600-line cap, so the required File size check is red — the sole reason this PR is blocked. The review says as much: "mechanical fix (~5 min), not a design problem. Code itself is LGTM." Moves `audioFxSummary` to `audioFxSummary.ts`, the same file a later branch creates for it. Deliberately the smallest cut that clears the cap rather than the whole `AudioFxGroup` extraction: every later commit in the stack edits AudioFxGroup, so moving it here would collide with each of them, while almost nothing touches this function. 595 lines. * feat(core,studio): hear the FX chain in preview, and run the carve analysis Splices an element's FX chain into the playback graph so preview stops being silent about effects, and wires the carve button that was previously inert. The chain goes between the decoded source and its gain stage: effects see the raw signal and volume automation rides on their output, matching the order the offline render uses. Since preview and render call the same graph builders, what is heard while scrubbing is what gets written. The splice lives in the transport rather than on the `<audio>` element. The transport plays each track from a decoded AudioBuffer and mutes the element to avoid doubling, so capturing the element with createMediaElementSource would have processed a stream nothing is listening to — it looked like it worked because the call succeeded, and the audio was unchanged. A chain that cannot be built plays dry rather than silencing the track, which is the right failure in preview: the author keeps working and hears the source. The render still refuses, because shipping the dry signal there would be wrong. Carve now analyses for real: it decodes the chosen voice track, ranks its bands and writes the resulting peaking filters onto this track. Generated nodes are tagged `fromCarve`, so re-running replaces the previous carve instead of stacking another set on top of hand-added effects. Known limitation: the graph is built when a source is scheduled, so a knob turned mid-playback takes effect on the next play or seek rather than immediately. Live re-parameterisation needs the transport to hold the handle and forward updates. * fix(studio,core): stop parameter drags from restarting playback Dragging a knob wrote the chain through the persisting attribute path on every input event. That path refreshes the preview, which reloads the composition and reschedules audio — so a single drag reloaded dozens of times and playback stuttered the whole way. Drags now go through `onSetAttributeLive`, the same path colour grading uses for scrubs: it coalesces undo entries and sets `skipRefresh`, so no reload happens. The persisting write fires once, when the gesture ends — pointer-up or blur for a slider, Enter or blur for a typed value. A select commits immediately since there is no drag to wait for. While dragging, the control is driven from local state. Waiting for the value to round-trip through the element attribute made the knob lag behind the pointer. For the change to be audible without a reload, the graph now follows the attribute: the chain installed by the transport observes the element and re-parameterises itself in place, so a value change lands on the next 128-sample quantum. A shape change (effect added, bypassed, pole count) cannot be patched into a running graph, so it still waits for the next schedule rather than cutting the audio mid-play. The regression test drags a slider through several values and asserts the persisting handler is untouched until release. * feat(studio): put the audio FX rack behind its canary Gates the rack on `isCanaryEnabled("audio-fx-rack")`, which is registered at 0% — so the whole 47-PR stack can land without showing anyone a feature that has not been measured yet. The gate sits on the AUTHORING surface and nowhere else. The runtime and the render still honour a `data-fx-chain` already on an element, so a composition written through the skill or by `carve.mjs` keeps its processing rather than going silently dry for anyone outside the cohort. A canary should stage who can REACH a feature, not make an attribute somebody already wrote stop working with no error. Gated at the panel rather than in `resolveEditingSections`: the affordance resolver is a pure function in core describing what an element CAN support, and rollout state is not a property of an `<audio>` tag. Pinned the 0% with a test, and checked it fails at 25 — a ramp should have to break something that says "this ships dark" out loud. One gap, stated rather than papered over: the gate itself has no unit test. I wrote one and deleted it, because `PropertyPanel.test.tsx`'s harness never renders the Audio FX group for its audio fixture even with the gate removed — so the test passed for the wrong reason in the off case and could not pass at all in the on case. A test that cannot fail for the right reason is worse than none. Verifying the gate needs the panel harness to mount that section first, which is its own change. * fix(core): register FX worklets before building nodes that need them An AudioWorkletNode cannot be constructed before its processor is registered — it throws, and the surrounding chain is lost with it. `attachElementFxChain` built the chain first and only then called `ensureAudioFxWorklets`, so every worklet-backed effect (compressor, limiter, gate, bitcrush) threw on construction and the track fell back to dry. Instrumenting the preview showed `hf-compressor: InvalidStateError` with addModule never called at all. When the module has not landed yet the track now plays dry and the graph is swapped in once registration resolves, so the effect arrives a moment late instead of never. Registration is also tracked per context rather than in one module-level promise. A processor registered on one AudioContext does not exist on another, so the shared promise made every context after the first believe it was ready when it was not — the studio's transport owns its own context, which is exactly that case. With the worklets actually running, the compressor's per-sample log10 and pow became real audio-thread work. Samples below the knee have a gain of exactly unity and need neither, so the envelope is now compared in the linear domain and the transcendentals only run for samples that are actually being compressed. * refactor(studio): split the FX node row out of FxSection Clears the health findings the FX stack left behind: the chain-node render callback was a 70-line closure over half of FxSection's state, and the two reorder arrows were the same button written twice. Also drops two exports with no consumers, and registers the audio FX runtime stub as an entry point — it is bundled by file path, so nothing imports it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * feat(core): automation envelope model for audio tracks Adds the data model behind Ableton-style automation lanes: breakpoint envelopes over track volume or one knob of one effect in the track's FX chain, stored on the element as `data-automation`. Times are clip-local, so an envelope travels with the clip when it moves — the clip-envelope model rather than arrangement automation. `sampleAutomationLane` is the single interpolator. The lane drawing, the preview scheduler and the render bake all call it, so the picture and the sound cannot disagree about the curve. Log-scaled parameters interpolate in log space, matching what their own knob already promises. FX nodes gain a stable `id`, minted by count rather than randomly so the document is the same on every machine. Lanes address nodes by id, so reordering a chain never re-points a lane at a different effect, and a lane whose effect was deleted is dropped rather than left to reattach. Also warns when a track carries both a volume lane and a GSAP volume tween, since only the lane is heard and the tween silently does nothing. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * refactor(studio): lift the audio FX group out of PropertyPanelFlat `PropertyPanelFlat.tsx` was 672 lines against the repo's 600-line cap, so the required File size check was red — the sole reason #3014 and #3022 are blocked. Both reviews say the same thing: "mechanical fix, not a design problem. Code itself is LGTM." Moves `AudioFxGroup` and `audioFxSummary` into `propertyPanelAudioFxGroup.tsx`, which is where a later branch puts them anyway — done here so the file is under the cap from the point it first crosses it, rather than ten branches later. 533 lines now. The four audio imports it no longer needs go with it. Not fixed here: three `FxSection carve` tests fail on this branch with "Cannot read properties of undefined (reading 'toFixed')". Confirmed pre-existing by stashing this change and re-running — that is the separate `Test` failure the review also flags. * feat(core): expose the AudioParams behind automatable FX knobs Marks the knobs an automation lane can drive and has each graph builder hand back the AudioParam behind them, so a scheduler can write to a running effect without knowing what the effect is. A knob is not always one AudioParam. A wet/dry mix is two gains moving in opposition, and a knob in milliseconds drives a delay time in seconds, so each target carries the mapping out of the knob's own declared unit. What stays unautomatable is stated where it is decided: a WaveShaper curve, a convolution impulse and a one-pole filter's coefficients are all rebuilt wholesale rather than scheduled, and the four worklet effects take values by postMessage rather than through AudioParams. The registry flag is written by hand, so a test builds every effect and checks the exposure both ways — nothing flagged is missing, nothing exposed is unflagged. A flag that lied would offer a lane that silently did nothing. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * feat(core): play automation envelopes in preview Schedules each lane onto the AudioParams behind its knob using native ramps and value curves. Nothing evaluates the envelope per frame: it is handed to the audio thread once, so it stays sample-accurate however busy the main thread is, and the offline render will schedule it the same way. Timing comes from the transport, so an envelope survives seeking into the middle of a clip, a clip that has not started yet, and a playback rate that compresses clip seconds into context seconds. A straight line is only scheduled as a ramp when nothing bends it — no curvature, a linear parameter scale, and no unit mapping. Log-scaled parameters and mapped ones are sampled instead, since a delay knob in milliseconds and a wet/dry pair moving in opposition are not linear in the parameter they drive. Lanes with nowhere to write are skipped rather than reported: a one-pole filter exposes no frequency param, and the worklet effects expose none at all. Editing an envelope mid-playback re-aims it at the live playhead rather than restarting the track. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): make the volume lane audible in preview The envelope was scheduled onto the transport's gain AudioParam, but the runtime rewrites that gain every tick from `data-volume` and the GSAP-seeked value — so it was erased within a frame. Volume automation was correct in the render and inaudible while previewing. The lane now feeds the per-tick path where the probed volume keyframes already sit, checked ahead of them so the two cannot fight, and the transport no longer schedules volume at all: one mechanism instead of two racing. The cost is honest — in preview the level steps per tick rather than per sample, exactly as the existing keyframe path does. The render still bakes it into the PCM sample-accurately, and FX parameters are still scheduled on their own AudioParams, since nothing rewrites those. Parsed lanes are cached by attribute text: the runtime asks once per tick per track, and parsing there would run the JSON parser 60 times a second for a value that only changes on an edit. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * feat(engine): bake automation envelopes into the render The offline render schedules FX lanes with the same scheduler preview uses, inside the OfflineAudioContext that already runs the same graph builders. The input WAV is the clip's own audio from its first sample, so clip-local time is offline time and the envelope needs no offset. Volume lanes take the existing PCM bake rather than a second mechanism: the lane is converted to keyframes, so a straight fade stays two of them and only a bent segment is sampled — the baker interpolates linearly and would otherwise quietly straighten the curve. A volume lane supersedes keyframes probed from the timeline, which `lint` already warns about. A browser test sweeps a lowpass from below a 2 kHz tone to well above it and measures both ends. Parsing the envelope is not the same as scheduling it, and only running the real thing tells the two apart. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): apply chain edits to the running graph A structural edit — an effect added, removed, bypassed, or a filter's pole count switched — was dropped. `buildFxChain`'s update reports false when the change is not merely new values, and the attribute observer ignored that, so the edit only took hold when the persisting write reloaded the composition. That reload restarted every playing track, which is what was heard as the audio chopping. The graph is now swapped in place: the old effects are detached, the new ones built and connected between the same source and gain, and any lanes re-scheduled onto the new nodes. The source node is never touched, so playback does not restart. A track with no chain is watched too, rather than wired through and forgotten, so adding its first effect is heard the same way. That means the function always returns a disposer instead of null for the empty case. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): drop the FX panel's dead __testables export Fallow audit flagged it — no test imports the module. * fix(core,studio): clear the remaining Fallow audit findings on the FX panel - Split FxSection's per-node row into FxNodeRow + FxNodeControls so the CRAP score (31.6, threshold 30) splits across two smaller units instead of moving wholesale with one extraction. - Dedupe the repeated "open the add menu, read its items" block in propertyPanelFxSection.test.tsx into openAddMenuItems(). - Merge build-audio-fx-runtime.ts and build-position-edits-render.ts into one build-inline-artifact.ts, config-selected by CLI arg — the two scripts were a byte-for-byte clone save for names. - Exempt canary.test.ts's rawFnv (a deliberate independent reimplementation used to cross-check canaryBucket, per its own docstring) and the property-panel test files' shared renderInto/mount scaffolding (pre-existing across 9 files, 2 outside this stack) in .fallowrc.jsonc, consistent with this file's existing exemptions for the same class of intentional/pre-existing duplication. * fix(ci): allowlist the build-script consolidation in the no-main-deletions guard build-audio-fx-runtime.ts and build-position-edits-render.ts were merged into build-inline-artifact.ts to kill a fallow duplication finding; the deletion guard flagged that as an accidental loss since main still has both originals. * fix(core): dedupe the wet/dry mix math between delayFeedback and chorusLfo Both effect builders set wet.gain to the mix and dry.gain to its complement in identical two-line blocks; fallow kept re-flagging it as a 10-line clone on every unrelated change. Extracted setWetDryMix. * fix(core): remove the build-audio-fx-runtime.ts stray resurrected by a main merge An earlier merge with main brought this deleted file back (git's merge/delete handling on an unchanged-on-one-side file); package.json already points at build-inline-artifact.ts, so it sat unreachable and duplicating that file's config, both of which fallow flagged. * fix(studio): pull TimelineLanes under the 600-line cap TimelineLanes.tsx hit 620 lines. Extracted the three per-clip pointer gestures (resize-start, pointer-down move-arm, click/razor-split) into createClipGestureHandlers — one factory call per rendered clip instead of ~120 lines of inline handler bodies in the render loop. 529 lines now. * fix(studio): split the extracted pointerdown handler under the CRAP threshold Moving the ~120-line gesture logic into timelineClipGestureHandlers.ts concentrated it into two functions fallow flagged (onPointerDown at CRAP 63.6, onResizeStart at 31.6). Split the decision logic (which gesture a pointerdown implies) into a pure resolvePointerDownAction, then split its own intent-blocking check into isIntentBlocked. onResizeStart's guard moved into canStartResize. Every function now scores under 30. * fix(studio): drop the unused DomEditSelection import in PropertyPanelFlat CI caught it on PR #3026 (wa-12-panel-params); a later refactor in the stack removed the last use of the type here without removing the import. * fix(studio): close the typecheck and fallow gaps wa-18b-reschedule opened useAutomationLanes.ts's write() assumed gesture-scoped coalescing and a preview-only commit that useDomEditAttributeCommits.ts never grew — backported that option support from its own later commit so the two sides of the API agree. The paste path and its tests were missing the box selection's v0/v1 bounds a sibling commit added to AutomationSelection. The FX panel's carve controls still edited the six mechanism numbers (maxCutDb, bands, intelligibilityBias) after carveProfile() collapsed authoring to one Strength knob, so those fields no longer existed on HfCarveSettings; UI now edits strength, and analyseCarveBands is called with carveProfile(strength). Also closes fallow's complexity, dead-code and duplication findings on this PR's diff: extracted automationLaneDragMath.ts (pure group/point-move math) and useAutomationRangeDrag.ts (the marquee-select gesture) out of useAutomationLaneGestures.ts, pulled a couple of render-loop ternaries and a resolver into named functions, dropped an export nothing outside its file used, and shared a step-simplifier between audioCarve's two envelope builders. The edge-stretch vs. box-select priority test in TimelineAutomationLane.test was still pinning the pre-box-select rule (edge wins over a point sitting on it) that a sibling commit deliberately reversed — a point inside the box is now selected content, so grabbing it drags the group instead. Updated the test to the shipped rule instead of the old one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): cap the via conic's weight so an edge-clamped via point can't NaN A via point pulled out past the segment (viaX: 5, viaY: -3) clamps to (0.999, 0.001) — exactly on the steady region's edge, where edge - viaX is 0. viaConic divided by that zero to get an infinite weight, and shapeVia turned Infinity into NaN a few steps later (Infinity - Infinity in the quadratic coefficient). NaN reaching setValueCurveAtTime silences the automated parameter for the rest of the render. Capped the weight at 1e6 instead of leaving it unbounded — past that point the arc already reads as touching the via point, so nothing visible is lost. Also hardened shapeVia's existing denominator guard (`<= 0`) to `!(> 0)`, since NaN fails the original comparison and fell through it. Review by Miga (PR #3208). * fix(studio-server): fingerprint the proactive waveform cache key too The route already keys the waveform cache on the asset's size and mtime as well as its path, so a rebuilt-in-place file gets fresh peaks instead of stale ones. generateWaveformCache — the proactive path that runs on upload — still called buildWaveformCacheKey with the path alone, so it wrote to a different key than the route reads from (making the pre-generated cache never found) and kept the exact collision bug this fingerprint exists to fix on its own path. Review by Miga (PR #3211). * style(docs): run oxfmt on the /hyperframes-audio skill docs Table column widths had drifted out of alignment with oxfmt's own rules, failing format:check and blocking the Preflight gate every downstream branch inherits. Whitespace only, no content change. * fix(studio): widen PropertyPanel's resetModules render timeout again The 20s margin (already once widened for the same reason) is timing out in CI's full-monorepo Test run — the resetModules()+fresh-import render this test needs is uncached and competes with every other package's test suite for the same worker pool, and the same test passes in well under 2s standalone. Went to 45s rather than re-tuning to whatever number happens to clear the current CI load, since that number moves every time CI gains a package. * feat(core): carve against every voice over a bed, always (#3212) * feat(core): carve against every voice over a bed, always dynamically A bed usually runs under a whole sequence — a narrator, an interview answer, a second presenter — and carving against one of them left the others fighting it. `source` becomes `sources`, and `mixCarveSources` sums every voice onto the BED's clock before anything is measured. That is what keeps one analysis sufficient: the chain is fixed, so there is no per-voice filter to switch between, and bands drawn from all the speech there is with envelopes that rise wherever any of it happens answer the actual question — where and when is speech masking this bed. Summed rather than averaged: two people talking at once mask more than either alone. Audio before the bed starts is dropped rather than folded in at zero, since it plays over nothing and shifting it would put a cut where there is no voice. `dynamic` is gone. A fixed depth thins the bed through every pause, and once both have been heard there is no reason to want it, so every carve follows the speech. Two helpers the panel and the headless script now share instead of each carrying a copy — two definitions of "what does this name suggest" drift, and then the two disagree about which track is the voice: - `classifyAudioName` reads a track's kind from its id and filename together. `unknown` is deliberately common: treating an unrecognised name as "not a voice" would hide the one track somebody needs to pick. - `clipsOverlap` keeps out a voice that never plays while the bed does. An unwritten duration counts as unbounded, not zero — refusing a clip whose length the composition leaves to the media would drop the commonest case there is. Files written before this still load: a single `source` reads as a one-voice list, a stored `dynamic` is ignored, and an absent attribute means the defaults whole. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(core): stop \b from missing underscore-separated names, guard clipsOverlap's negative duration \b treats `_` as a word character, so \bbed\b never matched bed_01, music_bed_loop, or theme_song, and \bvo\b/\bvox\b/\btts\b had the same gap — an underscore-separated bed classified as "unknown" and could end up offered as its own carve source. Replaced the short hints with a boundary that actually excludes letters and digits on both sides. clipsOverlap computed end = start + duration without guarding sign, so a negative duration put end before start — an interval that does not describe anything, and one specific case showed it silently dropping a real overlap (a shorter, earlier broken end rejected a clip that genuinely contained the point). Duration clamps to zero instead: a clip cannot un-play time, and a zero-length clip at its start is the sane reading of "duration nobody wrote down as positive." Review by Miga (PR #3212). --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(studio): port the carve UI off the removed source/dynamic fields #3212 (accidentally squash-merged into this branch instead of main) changed HfCarveSettings from a single `source` + `dynamic` toggle to a `sources` list with dynamic mode removed outright — the multi-voice UI consumer that goes with that shape lands in the very next PR, so this branch was left with a type that no longer matched its own code. Minimal port, not the multi-voice redesign that PR does properly: the "Listen to" picker and analyse() treat sources[0] as the one voice this UI still understands, and every dynamic-mode branch (the automated envelope lanes, the toggle, the checkbox) is gone along with the field — a carve is now always the static value the analysis computes, matching what the type change made permanent. Test suite trimmed the same way: the automation-lane and toggle tests covered behavior that no longer exists. --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-13 02:16:36 -07:00
Xuanru LiandCursor	43dba22057	fix(capture): bound scroll/evaluate timeouts so heavy pages keep capturing (#3236) ... * fix(capture): bound scroll/evaluate timeouts so heavy pages keep capturing Fonts/Vercel-class sites were failing after navigation when a single in-page scroll/evaluate hung until protocolTimeout. Drive lazy scroll from Node, degrade on evaluate timeouts, and stop labeling those failures as bot blocks. Co-authored-by: Cursor <cursoragent@cursor.com> * fix(capture): enforce stage budgets and surface evaluate degradation Bound each scroll/content evaluate with remaining stage time so a wedged page.evaluate cannot outlive the advertised 15s/8s budgets, skip recovery CDP calls after expiry, and return/propagate timed-out animation and screenshot work so caller warnings are reachable. Co-authored-by: Cursor <cursoragent@cursor.com> * fix(capture): prefer TimeoutError instanceof for timeout classification Use puppeteer-core TimeoutError as the primary signal for navigation vs evaluate/protocol timeouts, with message checks only as a fallback for string formatting and non-TimeoutError cases. Co-authored-by: Cursor <cursoragent@cursor.com> --------- Co-authored-by: Cursor <cursoragent@cursor.com>	2026-08-11 18:26:22 -07:00
Miguel Ángel	e0ba41c024	chore: release v0.7.107 (#3228)	2026-08-11 16:19:20 -04:00
Xuanru LiandCursor	7860d19433	fix(capture): fall back from networkidle2 to domcontentloaded on nav timeout (#3224) ... * fix(cli): fall back from networkidle2 to domcontentloaded on capture nav timeout Sites like yahoo.com never reach network idle, so website capture hung for the full 120s navigation budget. Prefer a short networkidle2 attempt, then continue with domcontentloaded and the existing settle/scroll path. Co-authored-by: Cursor <cursoragent@cursor.com> * fix(capture): use remaining timeout budget for domcontentloaded fallback Keep total navigation time within the caller --timeout instead of re-applying a full 30s floor after networkidle2. Co-authored-by: Cursor <cursoragent@cursor.com> --------- Co-authored-by: Cursor <cursoragent@cursor.com>	2026-08-11 11:31:59 -07:00
Miguel Ángel	c9dd8413c3	chore: release v0.7.106 (#3197)	2026-08-10 22:53:34 -04:00
Miguel ÁngelandMiguel Angel Simon Sierra	1ae2067b8d	feat(catalog): put the variables panel back, on payloads (#3199) ... * feat(catalog): put the variables panel back, on payloads The panel drove its preview by loading an .html from docs/public, a type the host does not publish, so it showed an empty frame in production and was parked when the catalog was re-landed. It now mounts the same JSON payload the plain player uses and re-mounts it as values change, injecting them as window.__hfVariables into the composition head before any of its scripts run, which is where the runtime reads overrides from. Doing it in the markup rather than after load is what stops the composition initialising with the wrong values first. 172 items with variables get the panel back; the playhead carries across a change so a tweak mid-shot does not jump back to frame zero. * fix(docs): drop the unused url form and the needless escapes * fix(docs): the panel cannot reference a binding beside the export * feat(catalog): make importing an SVG the obvious move A reader arrives at this control with a shape, not with path data, and the panel asked for the coordinates first. Import is now the primary action in a drop target you can see is a drop target, and the raw path sits behind a disclosure for anyone who wants it. * feat(cli): let a fruitless catalog search report the gap An agent that searches by meaning and finds nothing worth installing knows something we do not: the name of a move the catalog is missing. There was no way to tell us, so that knowledge was lost at the end of every run. hyperframes feedback --search-miss "<query>" --wanted "<the move>" records it. It carries no rating, so it never lands in the rating metric, and it is a separate deliberate command rather than something catalog --query does on its own: plain search still sends nothing, which is what the CLI promises. --rating stops being required at the arg level, since a miss has no rating to give. The check moved into the run body, where an absent one is now handled rather than crashing on undefined. * feat(cli): carry tuned variable values into the install snippet Someone who tunes a block on its catalog page had no way to keep those values: the install command was the same one everybody gets, and the tuning stayed on the page. hyperframes add <item> --vars '<json>' now prints a mount element carrying data-variable-values, so the values land where the block is used. They ride on the host rather than being written into the installed file. That keeps the composition on disk byte-identical to the registry's, so a later reinstall can still tell an edit from an update, and it lets two mounts of the same block carry different values. * fix(catalog): serve the item's own directory so runtime paths resolve Some compositions assemble their asset URLs at run time — "compositions/components/" + texture + ".png" for the texture masks, a font the compiler pulled into _remote_media — and no scan of the markup can see a string that does not exist until a script concatenates it. Those items either rendered black or were dropped to a video that had never been uploaded. Each item that needs it now has its prepared directory published, and its payload carries a <base> pointing at it, so any relative path the composition invents resolves. caption-texture renders its masks again, and variable-font-flex has a preview at all for the first time: its MP4 and poster are both 403. Both layouts are published, because which one a composition asks for differs per item, and a directory only earns that if it is under 2 MB. The 12 MB texture sheet keeps the recorded video it already had. * fix(catalog): let the variables panel actually drive the composition Every control on the panel was inert. The values reached the composition and nothing repainted, because the payload had already been compiled: compiling inlines a mounted component and resolves its variables into the markup and CSS, so by the time a reader turns a knob there is nothing left to change. An item that declares variables now ships uncompiled, keeping the mount the runtime loads at run time, which is the only state where data-variable-values still means anything. The component travels inline as a data URI rather than a sibling file, because .html is the one type the docs host will not publish. The demo's own pinned values come off, so the reader's choices reach the mount instead of losing to the values the demo picked to show itself off. Measured on the rendered frame rather than the DOM: green rgb(98,207,144), blue rgb(6,6,199), violet rgb(177,147,230), and back to green. docs/public/catalog drops from 48 MB to 35 MB along the way, since an uncompiled payload carries far less than an inlined one. * feat(catalog): keep variable changes in the url A reader who tuned a piece lost it on reload, and had nothing to send anyone. The values now live in the query string, scoped by composition id so two links never read each other,and only the ones that differ from the defaults are written, so changing one knob gives a short URL rather than every variable spelled out. replaceState rather than pushState: dragging a slider should not leave a trail of history entries. An unreadable value is ignored rather than thrown, so a truncated or hand-edited link opens the piece at its defaults. * fix(catalog): only rewrite the url when a value actually changed * refactor(catalog): memoise the declared defaults on their content * feat(catalog): offer an install command carrying the tuned values The Install block is generated before anyone touches a knob, so it can only ever print the plain command. Someone who spent a minute tuning a piece copied it and got the defaults back. The panel now carries its own command in the Snippet tab, with --vars holding exactly the values that differ. An untouched piece still offers the same short command, so nothing gets noisier for the common case. * fix(catalog): a piece with nothing to render is a skip, not a failure caption-blend-difference is a stylesheet and a paragraph of prose — a class you add to your own captions, with no standalone scene to show. The generator treated that as a build failure, so every run ended by reporting something broken when nothing was. It now reports the shape it is and keeps its recorded video, which is the only honest preview such an item has. A genuine render failure still throws. * fix(catalog): restore variables from the url on a cold load A shared link opened at the defaults. The first render happens on the server, where there is no window to read the query string from, and React then hydrates against that markup and never revisits it — so the values only appeared once you touched a control. The URL is read again after mount, which is the first moment it exists. The value is also escaped once now rather than twice: URLSearchParams already decodes on the way out, and decoding a second time turned an SVG path full of percent-escapes into something that no longer parsed, besides doubling the length of every link. * fix(catalog): mount the preview with the values a link carried The frame was built from the declared defaults and the shared values were posted to it afterwards, which is too late for anything the composition reads once at init: a path arrived after the mark had already been drawn from the default one, so a link looked right in the panel and wrong on screen. * feat(catalog): the install command follows the values you tuned Copying the Install line gave the plain command back, because that block is generated before anyone touches a knob and had no way to know what changed. The tuned command only existed in the panel Snippet tab, which is not where anyone looks for it. The line now reads the same query string the panel writes, so the two agree without either component knowing the other exists, and a shared link carries the right command too. replaceState fires no event, so the panel announces its own writes. * fix(catalog): send a text variable to the preview once it is finished Every other control in the explorer reports a whole value on every event: a slider at any position is a position, a swatch is a colour. A text field is not. Typing v3 into a badge posted v first, so the preview remounted and rendered a composition built from half a word. The post now waits while a text field has focus and goes out when the edit is committed, with Enter or by clicking away. The field itself is unchanged and still tracks every keystroke. --------- Co-authored-by: Miguel Angel Simon Sierra <miguelangelsi07@gmail.com>	2026-08-10 22:40:01 -04:00
Miguel Ángel	08934bfd55	revert(cli): keep HeyGen API traffic on stable prod (#3202) ... * Revert "fix(cli): route HeyGen API calls through canary (#3201)" This reverts commit 5545521556. * fix(cli): remove remaining EF canary routes	2026-08-10 21:41:21 -04:00
Miguel Ángel	5545521556	fix(cli): route HeyGen API calls through canary (#3201)	2026-08-10 21:26:46 -04:00
Miguel Ángel	0c33b2dc7a	feat(cli): keep your edits when you reinstall a catalog item (#3193) ... * feat(cli): keep your edits when you reinstall a catalog item Running add again overwrote whatever was on disk, so a project that had tuned an installed block lost that work without being asked or told. The installer now records a hash of each file as it installs it, and compares before writing. A file that still matches is replaced as before; one that does not is left alone and reported. A file we have no record of counts as changed, which covers both a project that wrote the file itself and one that installed before the record existed. --force restores the old behaviour for when you do want the registry's version. * test(cli): cover the dependency plan install path	2026-08-10 19:11:16 -04:00
Vance Ingalls	bd1c1af291	chore: release v0.7.105 (#3152)	2026-08-10 08:08:16 -07:00
Miguel Ángel	68205dbbc1	feat(cli): search the catalog by meaning, on this machine (#3089) ... * feat(cli): search the catalog by meaning, in three named tiers Browsing the registry means matching names and tags, which fails whenever the author's wording differs from yours. "make the pace feel faster" finds nothing when the move is described as "velocity-driven blur". This ranks by meaning instead. Three tiers, and the command always says which one answered: words shared vocabulary, free, offline, no account on-device bge-small, free, offline, one opt-in download hosted Gemini, free for signed-in HeyGen users The tier is stated because a quietly worse answer looks exactly like a good one. --json carries it as a token alongside dropped, shown, total and top_score, so an agent reads provenance as data rather than matching English that is written to be reworded. Two consents, asked once each, and never conflated. Sending a query is a privacy question, so the prompt says the query is sent. Downloading a model is a disk and bandwidth question, so that prompt talks about size. Neither fires without a terminal: an unattended run sends nothing and downloads nothing unless a flag records that a person agreed. The catalog is derived from registry-item.json rather than from a separate document, so the set that is ranked and the set that can be installed are the same object by construction. Only the on-device vectors are committed; the hosted vectors are nine megabytes and belong on the server. top_score is reported and never acted on. A "nothing matched" threshold looked clean on long briefs and collapsed on the short queries people type: "a logo appears" scores 0.6181 and keyboard mash scores 0.6417, so any cut that catches the noise rejects the real query. The measurement is in the evals directory rather than in this branch. Not covered here. The published recall figures were measured against a separate hand-written document, not against registry text, so they should not be quoted for this catalog until re-measured. The offline tier needs a normal install: a single-file build cannot load the native ONNX runtime, which the command now reports instead of silently degrading. And the drop-detection path has never been observed firing outside its author's tests. * fix(cli): make this branch pass the repo's own gates Three things `bun run lint` and `fallow audit --base origin/main` rejected. CI runs both, so none of this branch would have gone green. Found by running them, not by reading the diff. process.exit in catalog.ts, twice: an invalid --type and a cancelled picker. check:cli-process-ownership reserves that for cli.ts, and the rule is not cosmetic — process.exit tears the process down where it stands, so anything cli.ts has queued to run on the way out is dropped. finishCommand throws a CliResultSignal that cli.ts turns into the exit code, which is what init.ts already does for a cancelled prompt. Three exports with no consumers. normalize keeps its body and loses its export; localEmbedder is the only caller. modelsDirectory goes entirely, having no caller inside its file or out. The WordPieceConfig re-export goes, and with it the import it existed to forward: the type is exported from wordpiece.ts, where its consumers already take it from. Complexity. prepareOnDeviceTier is lifted out of run(), which took run from 64 cyclomatic and CRAP 948 to 54 and 684. That block is one decision — can the offline tier run, and if not, why not — and its only product is a list of warnings, so it reads and tests as a unit, which it could not do inline. The rest is suppressed rather than refactored, each with its reason on the line above. Finishing run() means extracting its three output paths, and that is a refactor of a command this branch already changes for other reasons: a separate initiative, not something to absorb here. Every suppression says what shape the function has and why; a bare marker on a function nobody can justify is how a threshold stops meaning anything. Verified: `bun run lint` exits 0, fallow reports no issues across 27 changed files, and 2540 CLI tests pass. * feat(cli): ship the local search tiers only, drop the hosted one Search now has two tiers, both local: shared-vocabulary word matching, and the opt-in on-device model. The hosted tier, which sent the query to a HeyGen endpoint and ranked it with a hosted model, is removed. This is a scope decision, not a defect. The endpoint works and its own change is reviewed and green; it is simply not what we want to ship first. Landing local only means the feature has no backend dependency, no auth requirement, and nothing leaves the machine unless someone opts into downloading a model. Gone: registry/smartSearch.ts and its test, the --smart and --no-smart flags, the outcome plumbing through the command, the remote branch of applySearch, the remote tier, and the hosted-only JSON fields (ranking, catalog_version, top_score). Also the smartSearchEnabled consent field in telemetry config, which was the persisted storage behind the hosted consent and would otherwise have been left as dead configuration surface. Kept exactly as they were: both local tiers, the --on-device and --yes flags, the download consent prompt, and the runtime check that happens before the download rather than after it. The --json envelope still reports query, tier, tier_detail, shown, total, dropped, warnings and results, so an agent can still tell which tier answered and why. tierToken now distinguishes on-device from words. Verified: lint exits 0, fallow reports no issues, 2522 CLI tests pass, and the command was exercised directly. A query answers on the on-device tier where the model is installed and falls back to word matching where it is not, reporting that fallback in warnings rather than silently. An unknown --type still exits 1 with a readable message, and --smart is now rejected as an unknown flag. * fix(cli): count only moves this registry cannot install as dropped The dropped count was computed against the list left after the user's own --type and --tag filters, so every move the user excluded was reported as one the registry is missing. Filtering made the number go up: the same query reported 277 unfiltered and 302 with --type block. The count exists so a caller can tell "nothing matched your words" apart from "the ranker suggested things this project cannot install". Conflating it with user filtering destroys exactly that signal, and worse, genuine index skew and a self-inflicted filter printed a byte-identical line with opposite remedies -- one means refresh the shelf, the other means drop a flag, and refreshing does nothing. Now counted against the registry rather than the filtered view. The manifest is already fetched whole and narrowed in memory, so keeping the unnarrowed name set costs no extra request, and item loading still runs only on the filtered subset. Verified against ground truth rather than by eye: the vector artifact holds 411 names, the registry holds 168 installable items, and 134 of those names exist in both, so 277 are genuinely uninstallable. The count now reads 277 unfiltered, 277 under --type block, 277 under --type component and 277 under --tag, and the skew it reports is real -- the artifact predates dropping the UI primitives and still ranks moves that are no longer on the shelf. Reported by Vance Ingalls, who also noted this closes an item the status doc listed as unverified. Two earlier sweeps could not make the count fire because neither combined a filter with a query. Tests pin the three cases: a genuinely absent name counts, a filter-excluded name does not, and a fully installable ranking reports zero. * fix(cli): tell the user when meaning search cannot see the catalog The on-device index was fetched once and never revalidated: the only freshness check was two existsSync calls. A move added after that fetch was invisible to meaning search permanently, not down-ranked but absent from the candidate set. The registry manifest on the same command carries a 24h TTL, so the two halves of one feature disagreed about staleness. The dropped count reported over-coverage only, names the index has that the registry lacks. Under-coverage was never computed, so the harmless direction was instrumented and the costly one was silent. Reproduced with an index truncated to 120 of 168 moves: dropped read 0, perfect health, while 48 moves were unreachable. Counts under-coverage from the name list the artifact already carries, so no extra request. Warns only when non-zero, and names the remedy. The remedy had to be made true: --on-device could not refresh a stale index because hasLocalVectors short-circuited the fetch. That flag now refetches when the index is absent or no longer covering. Two defects the reproduction surfaced. A failed refresh reported the tier unavailable while the old vectors were still on disk and still ranking. And the fetch wrote its two files one at a time, so failing between them paired a new name list with an old matrix, a hard load error rather than stale data. It now writes both or neither, which matters more once refresh runs on staleness. top_score returns, scoped to the on-device tier and set to the score of the best result actually shown rather than the ranking head, which can describe a row the caller never received. Also: scripts/ is now typechecked. It never was, which is how a build script that crashes after the paid embedding call, and two scripts whose imports do not resolve at all, went unnoticed. 43 errors fixed, no suppressions. And the docs stop describing a --smart hosted tier that was deleted, an item that does not exist, and a registry refresh that cannot fix a stale vector index. * ci: fail when the search index stops covering the registry The catalog vector artifact is regenerated by hand. Nothing in CI, in package.json or in a hook rebuilds it, because embedding needs the 32 MB model. So adding a registry item silently makes it invisible to meaning search until someone remembers to regenerate. The failure is asymmetric, which is what makes it easy to miss. Removing an item is self-healing: the ranker still scores the dead vector, then filters the name before display, so a user is never offered something they cannot install. Adding one is not: the item is absent from the candidate set entirely, not ranked low. Comparing the two name lists needs neither the model nor a network call, so the gate runs in seconds. CI checks rather than fixes, for the same reason it cannot regenerate. Scoped to blocks and components. Examples are starter projects a user scaffolds, never something catalog ranks, and the artifact carries no vector for them, so demanding one would keep this gate permanently red and it would be ignored within a week. Verified in both directions rather than assumed: adding an unindexed item exits 1 and names it, restoring the registry exits 0. * fix(catalog): rebuild the search index from the registry build-local-vectors.ts read registry/catalog-artifact/catalog.json, a file no script in this repo writes and which is not committed, so the documented regeneration command failed on a missing path. That is why the index could drift from the registry with nothing to run to fix it. It now reads registry/blocks/* and registry/components/* through catalogFromRegistry, the existing helper that already produced the right shape but had no caller. Rebuilding reproduces the shipped 168 rows byte for byte. A lefthook catalog-index command regenerates and re-stages both artifact files whenever a staged registry-item.json changes, mirroring the skills-manifest pattern, so adding or removing an item keeps the index in sync without anyone remembering to. Verified end to end: staging a new item took the artifact 168 to 169 rows and staged it in 0.80s. * fix(cli): refuse a half-downloaded vector cache The two artifact files have to agree on how many rows there are, and until now nothing checked that before writing them. A truncated or wrong-model response landed in the cache and only failed at load, on every later search, until someone cleared it by hand. The pair is now checked first and refused as a unit, and the cache is created 0o700 with 0o600 files rather than inheriting the umask of a directory the caller may have pointed anywhere. Also lifts the capture setup the two preview generators had drifted into sharing into scripts/preview-capture.ts, and splits the vector builders batching and packing out of main. Both were findings the audit attributed to this branch. * fix(cli): keep the catalog vitest run with the tests it runs Restacking took the base package.json wholesale, which dropped the vitest dependency and the scripts/catalog run this PR adds. Both belong here rather than under it. * fix(cli): stop the declined model download from happening anyway Answering no to the on-device download offer recorded no and warned, then carried on. The guard below it is localModelConsent() !== false, which the decline had just made false, so it was skipped rather than taken: control reached recordLocalModelConsent(true), overwrote the answer with yes, and fetched the 32 MB model the user had refused. Next run it never asked again. No test could catch it. The stub pinned localModelStatus to ready, so the prompt never fired, and recordLocalModelConsent was a no-op that recorded nothing. Two tests now cover the offer, and they need three things the old stubs did not model: the run has to look like a terminal, because off one the command treats --on-device as the consent and never asks; the ONNX probe has to answer true, or an accepted offer returns at the runtime guard before it can download; and the status has to follow the recorded answer, or the second offer later in the run fires as well. Removing the return makes the decline test fail. * fix(catalog): let someone without the model still add a component The pre-commit hook rebuilds the search index, and rebuilding needs the 32 MB embedding model. An outside contributor adding a registry item does not have it, so their commit died inside the ONNX loader on an ENOENT naming a path they never set, and the CI gate then told them to run the command that had just crashed. The model is an opt-in for search, not a build dependency, so nobody is charged for it to contribute. The builder checks first and explains itself, exiting 3 for cannot as distinct from 1 for failed. The hook treats 3 as skip and lets the commit through. The gate now names both paths: regenerate if you have the model, leave it if you do not and a maintainer will. Verified both ways: with no model the builder explains and the hook exits 0; with the model it still regenerates byte-identically. * docs: say that anyone can add a registry item, and stop hand-editing a generated file Two defects, one of them the reason 64 stale entries survived in registry.json. The checklist told contributors to add their item to registry/registry.json. That file is generated from the item directories, so an entry added by hand survives until the next regeneration and then vanishes, and one left behind for a directory that no longer exists is worse: hyperframes add resolves the name and then fails on missing files. Both CONTRIBUTING.md and the agent-facing skill reference now run the generator instead. Nothing said contribution was maintainer-only, but nothing said it was not either, and two steps do need assets an outside contributor has no reason to install. Those are now named in a table with what happens if you do not have them, matching how the preview image was already handled. The search index is the new one: the model behind it is a 32 MB opt-in for search, not a build dependency. * fix(cli): harden on-device catalog search * fix(cli): refresh stale catalog vectors * test: create catalog vector temp dirs securely	2026-08-09 22:59:15 -07:00
Miguel Ángel	db3de4c1bf	fix(cli): follow every redirect a host may answer with (#3148) ... * fix(cli): follow every redirect a host may answer with downloadFile handled 301 and 302 and passed the Location header straight back as a request target. Hosts answer with relative locations far more often than that assumed, and 303, 307 and 308 are all reachable, so a CDN handoff failed on a URL that was never a URL. Locations now resolve against the URL that sent them, the code set covers all five, and a hop cap ends a redirect loop rather than recursing. Keeps mains idle-response test, which asserts the request timeout fires and clears the partial file. An earlier version of this branch replaced the file wholesale and lost it, leaving downloadFile with no test that calls it at all. * fix(cli): bound and isolate model downloads	2026-08-09 21:49:43 -07:00
Miguel Ángel	c96b30c717	chore: release v0.7.104 (#3147)	2026-08-09 17:19:31 -07:00
Miguel Ángel	bea32b8aae	fix(studio): stop a Studio edit from reloading the preview (#3137) ... * fix(studio): stop a Studio edit from reloading the preview as if it were external Every mutation route wrote the file without leaving a write receipt, so the watcher's broadcast of Studio's own edit arrived with no identity on it. The external-change coordinator could not tell that echo from an agent or an editor writing the file behind Studio's back, so it took the safe branch and did a full iframe reload. That reload hides the stage for the length of the reload, which is what the flash after a text edit was. Every mutation write now goes through one helper that records the receipt, and the client claims the write before the request goes out rather than after it: the server writes and the watcher fires while the request is still in flight, so a token marked from the response can arrive after the echo it was meant to match. Reproduced in the browser before and after, with the reload path traced end to end. Before, a patch-element write logged `token: null` then a reload from the coordinator; after, the same write logs the token and `suppressed: own write token`, with no reload. Adds `hf-reload-debug` (localStorage, off by default) alongside the existing `hf-resize-debug`: it records each file-change decision and its reason, plus the stack of whoever asked for a full reload. * fix(studio): claim the timeline and caption writes too, not just the DOM ones The receipt only helps when the client marked the token it sent, and the GSAP mutation writers never sent one. A drag commits through gsap-mutations, so the server minted a token the client had never seen, the change came back looking like someone else's, and the preview did the full reload the receipt was meant to prevent. Same one-line claim on both GSAP mutation writers, the timing sync's mutation call, and the caption auto-save PUT. The rollback call stays deliberately unclaimed and says why: it runs because a mutation did not converge, so the preview is on bytes nobody can vouch for and the reload is the point. Verified live: a drag-shaped update-properties on the timeline now logs `suppressed: own write token` with no reload, where it logged a coordinator reload before. * refactor(studio): keep timelineTimingSync under the size cap Claiming the timeline writes pushed this file one line past the 600-line gate. Same change as the branch made later, landed with the commit that caused it. * fix(studio): cover remaining write receipt paths * fix(studio): preserve batch write receipts * fix(cli): emit every file in a watcher burst	2026-08-09 19:10:02 -04:00
Vance Ingalls	adb13ce125	chore: release v0.7.103 (#3127)	2026-08-09 03:14:27 -07:00
Vance IngallsandClaude Fable 5	19defeabfe	feat(core,cli): ship the DE parallel router fleet-wide — remove the canary gate ... Deletes the `de-parallel-router` canary entry and the `isCanaryEnabled` guard in render.ts together, leaving the producer's default-ON in place. Net effect for users: the parallel drawElement router is on for everyone again. ## Why, and why not a ramp Gating at 5% was itself the regression. Measured 2026-08-08, the day after v0.7.101 shipped the canary: fleet router exposure fell from 3.13-4.25% of non-CI renders to **0.13%**, roughly 25x, because out-of-cohort installs are explicitly disarmed and #2840 deleted the everyone-armed trial in the same change. 2,537 installs lost a feature they already had. Severity is speed only, never output, and nothing is persisted to disk. PR #2840's body claimed "the canary does not make exposure smaller; it makes it chosen and revertible." That was true of the end state and false of the first step. This lands the end state. Entry and guard go together deliberately: at >=100 the evaluator short-circuits ahead of the CI/seedless exclusions, so removing only the entry would have flipped whatever still resolved false at deletion time, unstaged. ## Both stated blockers are void - **≤4-CPU / Docker coverage gap.** Docker renders never use drawElement — 0 of 4,281 across every CPU tier, software GL gates it out — and the router requires it. No percentage could ever expose Docker, so no ramp closes that gap. ≤4 CPUs yields ~42 drawElement candidates in three days. - **PRINFRA-372.** Its signature has hits on 0.4.12, 0.4.37, 0.6.52, 0.6.93, 0.6.109 and 0.6.110 — versions predating drawElement (v0.7.38) and therefore this router. It is real, still live on 0.7.101, and belongs to the screenshot/beginframe path. 11 reproduction runs across four configurations on the enriched profile (darwin/arm64 25.5.0) came back clean. ## Safety unchanged The per-install circuit breaker and the per-render self-verify are untouched; `HF_DE_PARALLEL_ROUTER=false` remains the user-facing kill switch. Post-canary data at 14 days: >8 CPUs 3.02% revert (177/5,857), 5-8 CPUs 2.40% (6/250) — consistent with the 2.75-3.16% baseline. Revert path is now a code revert rather than a registry edit. That is the trade this shape accepts in exchange for one release instead of two. ## Corrects two claims that shipped wrong `~17x jump in exposure onto <=4 CPUs / Docker` overstated the reach, and `~11% of installs already route` was an OUTCOME (the share clearing eligibility and the old 25-render cap), not an exposure setting — read as a rollout knob it inverts the arithmetic, which is how gating at 5% came to cut exposure rather than ramp it. Both are recorded in render.ts so they are not reintroduced. ## Tests Removed the core wiring assertion and the two CLI canary-gating tests, which pinned a gate that no longer exists. Added the inverse guarantee in its place: an ordinary install must come out of the breaker with the var UNSET so the producer default applies — writing "false" there is precisely what disarmed the fleet at 5%. core 1701 passing, cli 2491 passing, studio canary 29 passing. The 2 failures in play.test.ts reproduce on clean origin/main and are unrelated (#3114 area). oxlint and oxfmt clean. Note: telemetry for this rollout stops with the entry — `$feature/canary-de-parallel-router` and `canary_reason_de_parallel_router` are emitted from the registry, so the `Ramp —` tiles and the exposure-floor alert on PostHog dashboard 1918875 go blank once this ships. Watch drawElement engagement on 1807532 instead. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-08-08 14:10:25 -07:00
Miguel Ángel	b1f7d8881b	chore: release v0.7.102 (#3119)	2026-08-08 13:13:50 -07:00
Miguel Ángel	b6ff3ab745	fix: preserve the composition query and serve the runtime before author scripts (#3114) ... * fix(player): stop re-encoding the composition query Every src the player sets goes through withShaderQueryParams, which parsed the author's whole query with URLSearchParams and re-serialised it with toString(). That is a form encoder: it writes a space as +, while callers percent-encode and read back with decodeURIComponent. Those two codecs are not inverses, so any space in any query value arrived corrupted. It ran even when there was nothing to inject. With no shader attributes both params are deleted, so the round-trip was pure loss, on every src, for every consumer. Append the two params to the raw query instead of re-serialising it. The player now hands a composition its query back byte-identical. Empirically space was the only casualty: plus, ampersand, equals, hash, percent, question mark, quotes and non-ASCII all survived a URLSearchParams round-trip. That is narrow, but a space in a headline or in SVG path data is the common case, and invalid path data renders nothing at all. Latent until now: no shipped consumer depended on query preservation, so this surfaced only once compositions began carrying variable payloads. * fix(cli): serve the runtime ahead of every author script injectRuntime appended its script before </body>, so it landed after any inline script the composition carried. At the moment a composition's own script ran, window.__hyperframes was undefined and getVariables() was unreachable: our documented API did not exist at the point authors are told to call it. Served order was gsap at line 6, the composition's init script at 20, the runtime at 37. A probe inside the composition's IIFE recorded hfTypeAtInit undefined with no variable keys, and the element rendered its hardcoded fallback rather than the declared value. The runtime is designed to load early. Its entry assigns __timelines, installs the authored-opacity capture (whose own comment says it must run while the document is still parsing), and exposes __hyperframes synchronously, deferring real work to DOMContentLoaded. End-of-body injection defeated all three, and nothing in it needs a parsed DOM, so no defer is wanted. Injects at head start instead, reusing the placement cascade injectScriptsAtHeadStart already implemented rather than adding a fourth copy of it. Head start rather than the closing tag so the runtime also precedes author scripts inside head. injectRuntime has exactly one consumer, the play server's composition route. Every other surface reaches the runtime through the bundler, which already injects into head, or deliberately serves raw. Two registry blocks had independently worked around this by parsing the authored attribute themselves. Those stay, but the workaround is no longer the only way to read a variable at init.	2026-08-08 13:07:10 -07:00
James Russo	ed3ff98ce0	fix(cli): stop skills update deleting skills the manifest never covered (#3118) ... `hyperframes skills update` deleted skills that the same command had just installed, from every agent directory on the machine, and reported them as "no longer published". `skills add --skill '*'` installs every skill in the repo — including the repo-native ones under `.claude/skills/` and `.agents/skills/` — and the upstream lock attributes all of them to `heygen-com/hyperframes`. The published manifest is generated from `<repoRoot>/skills` only (gen-skills-manifest.ts), so it never lists those. detectRemoved read that silence as "removed upstream" and pruned them, so `check || update` could not converge: `add` reinstalled them and the next `update` deleted them again. Scope removed-detection to skills the manifest is actually authoritative for, using the lock's `skillPath` — the only field that separates a skill installed from `skills/` from one installed out of the same repo's other skill roots (`source` is identical for both). An entry with no `skillPath` is treated as not covered: this is a delete path, so unknown provenance fails safe. Also resolve the prune's manifest canonically. Its notion of "still published" could otherwise come from any `skills-manifest.json` within 16 parent directories of cwd, which — since HyperFrames' own manifest declares `source: heygen-com/hyperframes` — matches lock attribution and drives deletion. The install-side check already did this (#2176); the deleting path did not, and the comment claiming that was deliberate and "tested separately" had no such test. An explicit `--source` still wins. Verified end to end against the real CLI in a sandboxed HOME. Before: `add` installed 25 skills, `update` printed "Removing 6 skill(s) no longer published: captions-overlay, changelog-video, cut-the-curve, motion-doctrine, oversized-cursor, seam-craft" and deleted all six (27 dirs -> 21). After: no removal line, 27 -> 27. Both new regression tests fail on the pre-fix source. Fixes #3111	2026-08-08 12:43:53 -07:00
Vance Ingalls	eba96feda7	chore: release v0.7.101	2026-08-07 19:50:48 -07:00
Vance Ingalls	867eeabc0f	Merge pull request #2840 from heygen-com/07-27-feat_producer_enable_parallel-de_router_by_default ... feat(cli,core,producer): ramp the parallel-DE router through the canary at 5%	2026-08-07 19:49:32 -07:00
Vance IngallsandClaude Opus 5	1033d03271	docs(cli): stop calling the router trial an opt-in in risk prose ... It is not a user opt-in — execute.ts arms it automatically on the CLI render path, so ~11% of installs already route without anyone choosing it. The opt-in is at the CALL SITE: the flag defaults off and only the two CLI sites set it, excluding programmatic renderLocal consumers because the mechanism mutates process.env. That polarity guards embedding contexts, not users. Calling it opt-in understates today's exposure, which changes how a reviewer judges the ramp: it is not protecting users from a feature they chose, it is governing exposure already happening without their choice. Leaves the accurate uses alone — 'explicit user opt-in' means someone setting HF_DE_PARALLEL_ROUTER themselves, and the call-site flag is genuinely opt-in. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-07 17:38:28 -07:00
Vance IngallsandMiguel Ángel	d9b00e57eb	chore: release v0.7.100 (#3093) ... Co-authored-by: Miguel Ángel <miguel.sierra@heygen.com>	2026-08-07 16:12:25 -07:00
Miguel Ángel	0bda6b55b8	feat(cli): track which registry items add installs (#3099) ... * feat(cli): track which registry items `add` installs `cli_command` records that `add` ran and nothing about what it installed, and the registry is served from raw.githubusercontent.com, which gives no per-item counter either — so there is no way to tell which block or component people actually pull, and no way to know what is worth building more of. Emit one `registry_item_added` event per item written into a project, from `runAdd` after the install succeeds. That is the single choke point: the bulk `add <tag>` path re-enters it per item, and a failed or compatibility-refused install throws before it, so a refused install is never counted as a download. `requested` separates the item the user named from the transitive `registryDependencies` pulled in behind it; without it a popular dependency outranks everything that depends on it. Item names are public registry identifiers, never user content or project data, and the event goes through `trackEvent` — an install that opted out via `hyperframes telemetry disable`, `HYPERFRAMES_NO_TELEMETRY` or `DO_NOT_TRACK` sends nothing. * test(cli): cover `add` telemetry end to end against the built CLI The unit tests assert the emit seam and nothing past it. `shouldTrack()` short-circuits whenever `isDevMode()` is true, and that is true for any `.ts` entry, so under vitest a real event and no event are indistinguishable and the transport is never exercised at all. Drive the built CLI instead and assert on the HTTP body it actually produces: one event per installed item, the dependency reported with `requested: false`, an opted-out install sending no request at all (not merely one without this event), and a refused install counting nothing. Two fixtures, because neither case is reachable through the real registry. The registry origin is a first-class project setting, so a local one supplies the `registryDependencies` edge that no shipped catalog item declares today; and `globalThis.fetch` is wrapped to capture the batch rather than send it. The faked 200 is load-bearing: only a failed flush leaves events queued, and only a non-empty queue spawns the detached `flushSync` child that would bypass the hook and reach production analytics. Verified the check can fail — forcing `requested: true` for every item turns it red on exactly the dependency assertion.	2026-08-07 16:00:23 -07:00
Vance IngallsandClaude Opus 5	4a2514232b	feat(cli,core): ramp the default-on router through the canary ... Rebased onto main (was 308 behind) and gated the new default-on behaviour on the de-parallel-router canary, at 5%. Default-ON without a ramp is a ~17x exposure jump: from ~6% of eligible renders today to all of them, landing on profiles the opt-in trial never covered (<=4 CPUs and Docker, ~12% of eligible renders between them). 0.7.60-0.7.64 is why that matters — every unclamped render reverted for five consecutive releases and nobody noticed. The gate reuses the breaker's own disarm: non-enrolled installs get an explicit HF_DE_PARALLEL_ROUTER=false, because with default-ON polarity deleting the var means ON. Setting the registry percentage to 0 is therefore a full fleet-wide revert with no release. Today's ~11% of installs routing is emergent — the product of eligibility rules and a capped trial — so it drifts with fleet composition and cannot be turned off without shipping. The point of the canary is that the number becomes chosen and revertible, not that it is smaller. Also replaces the registry test that pinned the percentage to 0. Its intent was 'ramp only alongside the circuit breaker', but pinning 0 blocks the ramp forever and never checks the wiring it names. It now asserts the wiring directly, and fails if either the canary gate or the breaker consult is removed. Hold at 5% until PRINFRA-372 resolves: --workers auto crashes every worker on macOS arm64 while --workers 1 is clean, and the router forces 3 workers. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-07 15:10:47 -07:00
Vance IngallsandClaude Opus 5	af535080a2	fix(cli): keep a set-but-empty router env var breaker-managed (review) ... Ownership detection classified ANY defined HF_DE_PARALLEL_ROUTER as a user choice, but both parsers read empty/whitespace as "unset -> default ON". Launching with `HF_DE_PARALLEL_ROUTER=` therefore routed the render (empty parses as ON) while exempting the install from its circuit breaker: after a verified fallback applyDeParallelRouterBreaker() no-op'd, so the install kept retrying the failing router instead of latching off. That is the exact first-fallback protection this PR exists to provide, lost on a documented default path. Ownership now uses the same normalization as the parsers. Also: only announce a trip the breaker could act on. With an explicit user opt-in the breaker is deliberately a no-op, so "now off for this install" was factually wrong — and reprinted on every later revert, since the user's value keeps the router active. Tests: set-but-empty and whitespace both latch off and persist the fired flag (fault-injection verified — restoring the old check fails both); explicit "true" survives a fallback. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-07 15:01:50 -07:00
Vance IngallsandClaude Opus 5	c6df112ac1	feat(producer): enable the parallel-DE router by default, behind a per-install circuit breaker ... The DE parallel router (HF_DE_PARALLEL_ROUTER) becomes default-ON. The soak answered the safety question it was gated on: zero damaged frames shipped — every fallback was the self-verification net catching a bad frame and recovering on the screenshot path. Verify PSNR p10 sits flat near 40 dB against a 32 dB floor. The residual 2.31% revert rate is an efficiency cost (a revert forfeits the speedup, never the output), accepted in exchange for parallelizing the >=700-frame band — roughly 80% of all DE capture wall-clock, frame-weighted. Default-ON is safe because the per-install circuit breaker stays underneath it. That distinction matters: 9.8% of installs hit a revert, and they are latched off permanently after the first one. Without the breaker those installs would go from "one slow render, then protected" to "every eligible render is slow". The breaker, adapted for a default-ON flag: - Writes an explicit HF_DE_PARALLEL_ROUTER=false and persists it to ~/.hyperframes/config.json, so the install stays off across processes. Absent no longer means off, so the switch has to be written, not unset. - Trips only on a real fallback, never on render count — a healthy install keeps the speedup indefinitely. - Independent of telemetry state: opting out of analytics must not cost a user the faster renderer. Telemetry governs reporting, not behavior. - An explicit user value wins in both directions, latched before the breaker can write the var and make the two indistinguishable. - The user is told when it trips and how to re-enable. isDeParallelRouterEnabled() parses the kill switch properly: false/0/off/no (case- and space-insensitive) disable; unset or empty is the default. A bare `!== "false"` would silently ignore every spelling but one and hand parallel DE to a user who asked for none. Refs PRINFRA-384 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-07 15:01:49 -07:00
James	7640adc5f2	fix(cli): refresh identity persistence classification	2026-08-07 09:31:59 -07:00
Miguel Ángel	9aa90f6e3e	chore: release v0.7.99	2026-08-07 15:31:57 +00:00
Miguel Ángel	dd629697d3	fix(cli): harden publish retry behavior	2026-08-07 15:13:04 +00:00
Miguel Ángel	f2d6ce3245	fix(cli): recover transient publish failures	2026-08-07 14:53:20 +00:00
Vance Ingalls	6114749d8e	chore: release v0.7.98	2026-08-06 23:37:23 -07:00
Miguel Ángel	c4b41072c7	chore: release v0.7.97	2026-08-07 05:16:27 +00:00
Vance Ingalls	026e6941ac	chore: release v0.7.96	2026-08-06 14:53:26 -07:00
Vance IngallsandClaude Opus 5	b3990ac789	feat(studio): emit the canary reason on Studio events too ... Review caught that the same anti-pattern was still live in the Studio binding: canaryEventProperties destructured only `enabled` and dropped the reason. Its own doc comment promised 'identical shape to the CLI, so a rollout spanning both reads as one flag' — which the CLI-only fix had just made false. This matters beyond symmetry. A CLI-launched Studio adopts the CLI's decisions and shares its bucket seed, so a cohort flip can surface on either surface. Emitting attribution on only one leaves Studio-observed flips unattributable and makes the two flip counts irreconcilable — and Studio is the surface most likely to expose a shared-seed-with-diverging-id pattern, which is the open question the reason exists to answer. Also adds the no_unit_id emission test the CLI side advertised but never asserted, and a Studio pair pinning that a URL override and a cohort roll produce the same assignment with different reasons. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-06 14:39:56 -07:00
Vance IngallsandClaude Opus 5	076657a639	feat(core,cli): emit the canary decision reason alongside the assignment ... The calibration contract deferred this until the stability check came back dirty. It did: the first fleet read found 304 installs (1.08%) reporting both values for a canary whose percentage never moved, and the genuinely anomalous ones could not be separated from a developer toggling HF_CANARY_*, because the assignment alone is identical in both cases. resolveCanary has always computed the reason and canaryEventProperties dropped it. Now every canary emits canary_reason_<name> beside its assignment. Deliberately outside the $feature/ namespace: PostHog treats those as flag values, and a non-boolean there would corrupt the flag's own breakdowns. Two of the six wire values are immediately useful beyond override attribution. 'excluded' identifies CI installs, which today have to be dropped by joining on is_ci — conflating them with out_of_cohort is what made the first accuracy read look like a significant failure (9.22% against a 10% target) when it was not. 'no_unit_id' surfaces the fails-closed corner. The reason is optional on the core helper so existing callers are unaffected. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-06 13:57:08 -07:00
Miguel Ángel	fc0298de4a	chore: release v0.7.95 (#3068)	2026-08-06 10:12:20 -07:00