* test(engine): pixel invariants for capture blur against blur off
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* test(engine): fixtures for every capture blur failure class seen so far
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* test(engine): nested canvas fixture reproduces #6975, sharp-tile fixtures have no moving times
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* test(engine): capture blur must match blur off outside the trail and the shutter average inside it
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* test(engine): differential tests pin known bugs by symptom, history test checks the reference frame
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* test(engine): a playing preview keeps changing with blur on
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* test(producer): a multi-worker blur render must match blur off outside the trail
Renders five blur fixtures through the real producer as a PNG sequence with 4
workers (contiguous blocks, three of them starting mid-film, the #6967
condition): blur off twice, blur on once. Outside the trail of everything that
moved, blur on must equal blur off in every frame with two neighbours. The
callbacks and scroll-list known differences are pinned by symptom.
Import route: a relative import of blurDifferential.ts, fixtures.ts and
thresholds.ts from packages/engine/src/services/__fixtures__. The producer
tsconfig excludes test files, so I type-checked the file with a temporary
tsconfig (rootDir widened); no error. No package subpath was needed.
RENDER_OUTSIDE_MAX_MAE: render noise is 0 (blur off, twice, bit-identical), the
rewind mutation measured 111.085 when caught, so the 1.0 floor applies.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* test(producer): render callbacks with workers that start between its calls
With 4 workers the blocks started at 0, 15, 30, 45, each on a call, so the
rewind mutation showed in a render only 3 times in 5. Seven workers over 60
frames start at 0, 9, 18, 27, 36, 45 and 54, two of them strictly between the
calls at frames 16 and 30; the mutation then fails callbacks in 8 of 8 runs
(worst MAE 97.02), the clean build in none.
A new case checks the partition with distributeFrames. The #list and #label
rects now come from the fixture's markup, and MEASURED_RENDER_REWIND_MUTATION
is 97.02.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* test(engine): blur pins bound the symptom, liveness detector reports blindness, fixtures time out
Pinned known bugs now require every bad tile inside the pinned region and a worst
MAE within half to double of the measured one. tileTouches, Rect and the band check
move into blurDifferential.ts with a dpr 2 unit test. The blank-frame census counts
canvases it cannot read and asserts none, and names both readings when no blank frame
is seen. No console.info on passing runs. Fixtures cases get a 30 s timeout.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* test(producer): scroll-list render case bounds the race, pins share the engine helpers
The scroll-list loss depends on timing per worker block, so the case now requires
frames 2..27 clean and any later bad tile inside #list, without requiring the loss.
The callbacks pin keeps requiring its symptom, bounds it to the label and to half to
double of its measured size, and its message names the entry to delete. Wording says
multi-worker, not 4-worker.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* build(engine): keep the blur test helpers out of the published tarball
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* test(engine): print the worst outside tile of each arm to explain the CI text diff
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* test: both arms draw grayscale text so host subpixel settings are not read as blur
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* test(producer): run the multi-worker blur render alone so it cannot skew other Chrome tests
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* test: re-pin the producer lane runner after splitting out the heavy blur render
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* test(engine): read the blank-frame pin from a wrap observer, not an animation frame poll
The pin sampled in requestAnimationFrame, so it could miss the gap between the
wrap and the first draw. A MutationObserver now reads the output canvas the
moment the root is wrapped, which is deterministic, and every fixture must
report a wrapped root.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* test(engine): drop the blurs field no fixture could set to false
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* ci: give the flake gate 60 minutes, it budgets runs by file count not time
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* fix(cli): capture's public-address check uses the engine's list; 192.0/16 is not all reserved
Only 192.0.0.0/24 and 192.0.2.0/24 are special-use. The capture proxy blocked all of
192.0.0.0/16, so sites on WordPress VIP (192.0.64.0/18, e.g. nasa.gov at 192.0.66.108)
failed every capture with net::ERR_TUNNEL_CONNECTION_FAILED. isPublicIPv4 now reads the
engine's isBlockedNetworkHost, so capture and asset downloads share one list.
— Jerrai (cutroom-debug)
* refactor(engine): one special-use network list, in a light subpath capture imports
Importing all of @hyperframes/engine into capture's publicNetwork slowed the lookup child's
start-up past publicNetwork.process.test's 6 s mid-lookup exit. The list and
isBlockedNetworkHost move to engine/src/utils/networkPolicy.ts, exported as
@hyperframes/engine/network-policy; urlDownloader and the engine index read it there.
— Jerrai (cutroom-debug)
* test(engine): pin 192.0.0.0/24 and 192.0.2.0/24 blocked, the rest of 192.0/16 public
— Jerrai (cutroom-debug)
* fix(cli): alias the engine's network-policy subpath in the CLI bundle
esbuild's root alias rewrote @hyperframes/engine/network-policy to src/index.ts/network-policy;
the exact-subpath list now carries it. The publicNetwork docstring is cut to keep the file's
comment share under its base.
— Jerrai (cutroom-debug)
* ci(windows): probe that a render opens no visible window
* ci(windows): the probe names what opened each window
* ci(windows): the probe spawns each binary alone, with and without detached
* ci(windows): the probe logs the processes started during the render
* ci(windows): the probe also spawns Chrome one consoleless hop down
* ci(windows): the probe logs each child started without windowsHide
* ci(windows): the probe logs every child process with its windowsHide and detached
* fix(engine): Chrome keeps the CLI's console on Windows, so a render opens no window
* fix(cli): every child the CLI starts on Windows is hidden unless it opts out
* ci(windows): the probe bisects Chrome's flags and keeps each command's output
* ci(windows): the probe names the Chrome process behind each window
* ci(windows): the probe loads a page in Chrome directly and one hidden hop down
* ci(windows): the probe prints the Chrome main command line and renders with the reporter's flags
* ci(windows): the probe narrows the CLI's Chrome arguments to the ones that open a window
* ci(windows): the probe launches the CLI's Chrome arguments one hidden hop down
* ci(windows): the probe launches Chrome through the engine's browser pool
* ci(windows): the probe varies what the engine passes to Puppeteer
* fix(engine): renders on Windows launch Chrome with a Puppeteer that keeps it attached
* refactor(cli): hideChildConsoles copies its arguments and keeps one comment line
* fix(cli): a Chrome that fails to start says how it ended, and a slow start says so
A failed launch only reported "Protocol error (Target.setDiscoverTargets): Target closed". It now
runs the browser once more on its own with the same flags and reports its exit code (Windows
codes named: missing runtime, out of memory, security software), its last stderr lines, or that
it stayed up. The CLI and the engine's render launch both use it. A start slower than 5 s prints
"Chrome is still starting...", and a --timeout that looks like seconds says it is milliseconds.
* chore(cli): cut the Chrome launch diagnosis comments to the comment limit
* fix(cli): the Chrome startup check runs Chrome as puppeteer does and can be cancelled
The check started the browser with only the caller's flags, so a full Chrome ran headful and
was blamed for a missing X server. It now uses puppeteer's default arguments (headless
included). The check is stopped when the CLI is stopped, and the GPU probe, whose failure
falls back to software anyway, skips it.
* fix(cli): a Chrome launch error is never replaced by a failure to explain it
The startup diagnosis asks puppeteer for its default arguments before re-running
Chrome. If that call fails, its error used to replace the launch error the caller
needed. The launch error is now reported as it was. The core package size budget
rises to cover the new chromeStartup module (about 4.7 KB unpacked).
* refactor(engine): the Chrome startup diagnosis lives in the engine, not core
Both callers launch Chrome through the engine (the CLI already imports it), so the
engine owns the diagnosis. Core's package size budget is back to its old value.