* perf(aws-lambda): small-chunk cloud renders stitch their output in parallel
When every chunk's payload is under S3's 5 MiB part minimum (typical for short 4K chunks), the assemble step could not copy any part server-side and pulled the whole output through one Lambda's network link. Those range-only parts now go to parallel invocations of the warm function that just rendered the chunks, about 32 MiB each and never more at once than the stack's reserved concurrency allows. The output bytes are unchanged.
* fix(aws-lambda): a throttled stitch helper builds its parts in the assemble instead
Another render can hold the stack's reserved concurrency while this one assembles, so a helper invocation may be refused. The assemble now builds that batch itself, logs it, and counts it in assemble_stages; the helper's error type is kept as the error name. Comments trimmed back to each file's share at the base.
* chore(aws-lambda): raise the package size budget to the measured size plus headroom
The parallel stitch helpers add about 1.7 KB packed and 9.9 KB unpacked; the new budget is the measured size times the checker's own 1.05 headroom.
* perf(aws-lambda): each chunk logs where its seconds went
The chunk_capture event now carries the handler's setup time and the renderer's own stage timings (plan check, browser boot, capture, encode, total), which the renderer already measured but the logs dropped. Lets a fleet run be split into start-up, capture and tail per chunk.
* perf(aws-lambda): chunk logs also time the Chrome path resolution
On the container image the compressed Chrome may be unpacked on every cold chunk; chromeMs separates that from the plan download in setupMs.
* fix(producer): chunk capture round-robins only for callers that bill wall time
* fix(engine): worker, extraction and encoder sizing read the CPU quota, not the host core count
* Revert "fix(engine): worker, extraction and encoder sizing read the CPU quota, not the host core count"
This reverts commit cdd4d858c8.
* chore(producer): drop the doc comments the comment ratchet rejects
* perf(aws-lambda): warm the audio function while the plan runs
The audio task runs on the x86 render function, which is cold when the plan ran on the arm64 video function. A fire-and-forget invoke at the start of a render now wakes it, so the audio no longer outlasts the chunks.
* perf(aws-lambda): warm the render function only on a stack with a video function
An x86-only stack has no cold function to warm, so it takes the old path with no extra step. The CDK stack has no video function and is unchanged.
* perf(aws-lambda): wrap a template comment
* style(aws-lambda): format the warm-up template test
* fix(aws-lambda): make webm and mov audio in the separate audio task like mp4
A WebM or MOV plan mixed and encoded its own audio, so on a stack whose plan runs on an arm64 function the audio came out of a different ffmpeg build than an x86 render's. The plan now leaves that audio to the separate audio task, as mp4 already does, and the assembler joins the chunks with that file. Only mp4 chunks stitch; cfr and png-sequence keep their audio in the plan.
* test(aws-lambda): join mov chunks with the audio task's track too
* refactor(producer): keep the separate-audio gate's one-line doc comment
* feat(aws-lambda): a cloud render mixes its audio beside its chunks
* fix(aws-lambda): the audio task keeps a worker free and runs only when the plan left audio out
* test(aws-lambda): the audio task's free worker holds for a reserved pool of 1 and 2
* refactor(aws-lambda): one helper points every handler at the bundled Chrome
* perf(producer): distributed chunks download only the videos they show
A project video under compiled/ that chunks extract their own frames from
now goes only to the chunks that show it, like video-sources/ files. A
chunk skips the readiness wait for a deferred video it does not show, so
it no longer logs media_load_failed for a file it was never given.
* fix(producer): cloud site uploads pack the files their id hashes, symlinks included
* perf(aws-lambda): chunks read only the byte ranges of a video they need
A chunk that extracts its own frames from a deferred project video now
reads it from S3 by byte range through a short-lived pre-signed URL,
instead of downloading and hashing the whole object first. S3 attests the
object's stored SHA-256 before the URL is signed; every other artifact is
still downloaded and verified as before.
* perf(aws-lambda): upload project files once to a shared content-addressed area
* chore(producer): keep planV2 comment share at the base level
* fix(engine): verify the TLS certificate of https video inputs and never surface their signed query
* fix(aws-lambda): renders re-upload a site's expired files instead of failing
* perf(aws-lambda): the plan step probes project videos in place instead of downloading them
* fix(engine): https video reads reconnect and time out, and redaction covers wrapped causes
Signed-URL reads now pass -rw_timeout, -reconnect and -reconnect_delay_max (both Lambda builds accept them) and ffmpeg also -reconnect_on_network_error, so a transient S3 error or a stalled read fails fast or recovers instead of waiting out the process timeout. Query redaction now descends into error.cause.
* fix(aws-lambda): share entry bundles and ratchet package budget
* fix(aws-lambda): site ids uploaded before files.json still render
A site id from an earlier sites create has only sites/<id>/project.tar.gz.
renderToLambda now falls back to that tarball, which the plan step still
reads, and when neither key exists it fails before starting with both keys
named and the fix (run sites create again).
* fix(aws-lambda): renders fail before upload on a stack too old to read sites
A stack deployed before files.json sites untars the site file in its plan
step and fails after four retries. renderToLambda now reads the state
machine definition first and stops with STACK_TOO_OLD and the redeploy
command when the plan task does not list SITE_MANIFEST_INVALID, which new
SAM and CDK stacks now treat as terminal. The README's upgrade section
drops the planProtocol v1 fallback, which hits the same failure.
* docs(aws-lambda): document shared content storage and the upgrade path
The deploy guide still described the tarball HeadObject short-circuit. It
now covers the cas/sha256/ store and its 30-day lifecycle rule, the
STACK_TOO_OLD, SITE_FILES_MISSING and SITE_NOT_FOUND errors, that old site
ids keep working, and that every project uploads once more after the
upgrade. A test keeps a troubleshooting entry for each pre-submit error.
* fix(producer): chunks log each video they read by URL, without its query
A chunk reading a video straight from the bucket left no trace in its log.
It now logs one line per remote source with the path and the URL minus its
query string, so signatures never reach the log.
* fix(engine): ffmpeg errors never keep part of a signed URL's query
A process's stderr tail was trimmed before its URLs were redacted, so a
cut inside a signed URL left a query fragment the URL pattern no longer
matched, and the fragment reached the error. The stderr tail is now
redacted before every trim, and the redactor also strips a signing
parameter cut off from its URL.
* fix(aws-lambda): comments name the site manifest instead of a file path
* fix(engine): stderr redaction survives chunk splits, and every ffmpeg spawn uses it
The stderr tail was redacted on each chunk and then cut, so once a cut
severed a long URL's scheme, the rest of its signature in the next chunk
matched neither pattern. The tail is now kept raw with 2x slack and
redacted only when the text is produced, then cut to size. The unused
producer audioExtractor (its own spawn, unredacted stderr) is deleted and
the parity harness's PCM decode goes through ManagedChildProcess; a test
fails on any ffmpeg/ffprobe spawn in engine, producer or aws-lambda that
does not.
* chore(producer): record the audioExtractor deletion as intended
* fix(engine): drop a signature fragment the stderr tail cut from its URL
The raw tail is kept at twice the cap, but that cut can itself land inside a
signature, and when redaction shrinks the rest below the cap the fragment
survived. After a cut, the severed token is dropped before redaction.
* refactor(engine): name the severed-token drop instead of commenting it
* test(engine): a cut-off URL leaves nothing behind; aws-lambda size budget to measured
* fix(producer): chunk URL-read tests use main's frame list; producer size budget to measured
* chore(producer): size budget at the measured size, no headroom
* chore(producer): size budget back to measured x1.05, the check's own rule
Plan reads the account's Lambda concurrency when a render sets none, and
the handler tests left that client to its default, so a machine with AWS
credentials made a real GetAccountSettings call. Every handler call in the
file now gets a stub that refuses, and a guard fails any test that sends
through a real Lambda or S3 client.
* perf(aws-lambda): run chunks through a Distributed Map to lift the 40-chunk cap
The inline Map runs at most 40 chunk renders at once. Both state machine
definitions (CDK and SAM) now use a Distributed Map with STANDARD child
executions, capped at the function's reserved concurrency so chunks past it
queue instead of being throttled. Progress reads each chunk's child
execution history so frames, cost and chunk errors still show up.
* fix(aws-lambda): retry Lambda throttles for minutes and stop on oversized chunks
A throttled task used to burn its four catch-all retries in about 30 s.
It now gets its own jittered backoff of several minutes, because another
render on the same function can still hold the reserved slots. Plan
treats CHUNK_EXCEEDS_WORKER_TIMEOUT as terminal in both definitions.
* chore(aws-lambda): trim stack comments to keep the comment share flat
* fix(aws-lambda): keep render --wait working at hundreds of chunks
Progress polls read the chunk Map Run's counts (one DescribeMapRun) instead of
every child execution's history, take exact chunk frames and cost from the Map
output once it exits, and read failed children only when the counts show a
failure. The SDK client retries throttled calls up to 8 times with backoff.
* feat(aws-lambda): size each render's concurrency to the account instead of a fixed 8
* fix(lambda): keep the concurrency SDK external in published modules
* fix(cli): keep an existing stack's reserved concurrency on redeploy
Redeploying without --concurrency sent ReservedConcurrency=-1, which
removed the cap of 8 that earlier CLI versions reserved by default and
stopped recording it in the state file. The override is now left out
when the flag is omitted, so SAM keeps the stack's current value (a new
stack still gets the template's unreserved default). The state file
records the deployed value, and deploy prints the kept reservation.
* fix(aws-lambda): keep progress working for callers without DescribeMapRun
Callers whose IAM policy came from an earlier `lambda policies user`
lack states:DescribeMapRun, so reading a running Distributed Map threw
AccessDeniedException out of `lambda progress` and `render --wait`
while the render itself went on to succeed. getRenderProgress now
catches only that error around the map-run read, returns the parent
snapshot (status, plan and assemble progress) and adds a warning to
re-apply the policy, which both commands print. Other errors still
throw.
* fix(cli): let the documented deploy policy drop a reserved concurrency
When a redeploy removes a function's reserved concurrency, CloudFormation
calls lambda:DeleteFunctionConcurrency. The policy printed by
`lambda policies role|user` granted only PutFunctionConcurrency, so the
update failed and rolled back. Grant it, and pin it with
states:DescribeMapRun in the required-actions test.
* fix(aws-lambda): read smoke chunk hashes from the Distributed Map output
With chunks in a Distributed Map, their task results live in child
executions, so the smoke gate's chunk-hash check found 0 chunks in the
parent history and failed every v1/v2 comparison. Read Chunks[] from the
RenderChunks / RenderChunksV2 MapStateExited output instead, as
getRenderProgress does. The stack this script deploys only has the
Distributed Map, so the inline-Map path is gone.
* fix(producer): cap a pinned chunk size at the worker concurrency, not 16
With --chunk-size or --target-chunk-frames and no --max-parallel-chunks,
the plan still capped the render at 16 chunks however many workers the
account allowed, so --chunk-size 30 on a 60 s render gave 16 chunks of
113 frames. The cap is now one wave across the worker concurrency, as
the --max-parallel-chunks docs say; 16 remains when the concurrency is
unknown.
* feat(cli): remove a stack's reserved concurrency with --concurrency=none
Since an omitted --concurrency now keeps the stack's reservation, there
was no CLI way back to the unreserved default. --concurrency=none sends
ReservedConcurrency=-1, the state file records the stack as unreserved
and deploy says the reservation was removed. Positive N and an omitted
flag behave as before; any other value is rejected instead of being
silently ignored.
* chore(aws-lambda): raise the package size budget for account-sized concurrency
Measured with pnpm@10.17.1 pack after rebasing on main with the S3 assembly change: 67,763 packed / 244,685 unpacked; the budget is the check's own 5% headroom over that.
* perf(producer): assemble chunks that carry audio under one faststart index
Reads each chunk's moov, merges the sample tables into one moov at the front, and writes
the chunks' mdat payloads after it unchanged: the same bytes storage can copy into place.
The assembler no longer needs the plan audio for such plans.
* perf(aws-lambda): build the final mp4 inside S3 with its index up front
The Lambda plan asks chunks to carry their audio. Assemble writes the faststart header as
part 1 of a multipart upload and copies each chunk's mdat payload with UploadPartCopy, so
the video bytes never pass through the function; any failure aborts the upload.
* fix(engine): a chunk's first frame shows its own time, not the composition's opening frame
* fix(producer): stitch silent AAC tails and clean failed outputs
* fix(producer): open stitched chunks read-only with an explicit mode
* chore(aws-lambda): raise the package size budget for S3-side MP4 assembly
handler.js and index.js each bundle the new S3 stitch code (+5,550 bytes apiece) and s3Stitch.d.ts adds 970: +3,479 packed and +12,070 unpacked over main, measured with the CI pack. The budget rises by exactly that delta.
* fix(aws-lambda): v1 plans give chunks their audio too, so both protocols match
* perf(producer): plans whose chunks carry audio encode it once, at the frames' exact length
* test(producer): terminate the plan audio ffprobe argv like every other probe
* fix(producer): mix audio into a container that can record encoder delay
Every rendered composition's audio landed 1024 samples (21.33 ms at 48 kHz)
after its authored `data-start`, against a frame-accurate video track.
The mix is AAC-encoded, and AAC encoders emit ~1024 priming samples. The mix
was written to a raw ADTS `.aac` file, which has nowhere to record that delay,
so it decoded as real leading silence and every stage downstream preserved it
faithfully. Measuring each intermediate localises it precisely: the source WAV
is exact, the mixer's own output is already 21.33 ms late, and the pad/trim and
mux stages inherit it unchanged. The filter graph itself is correct - run by
hand to PCM it lands on the authored start.
Switch the artifact to an MP4-family container, which stores the delay as an
edit list that decoders strip. Same codec, same bitrate, so no size or quality
change.
The filename is a contract shared by three consumers - the mux input, the
distributed plan artifact, and the PNG-sequence sidecar handed to users for
NLE ingest - and its extension is what selects the muxer. Give it one owner in
the engine rather than five literals, so those consumers cannot drift onto
different containers.
Note for reviewers: this renames the distributed plan's audio artifact, which
is an on-disk contract between the plan writer and the assembler. Both move
together here, but a plan written by an older build would not be found by a
newer assembler. Flagging in case that mixed-version window matters for how
these are deployed.
* fix(cloud): read the plan audio artifact name from the producer contract
The aws-lambda and gcp-cloud-run adapters each restated the plan's audio
filename in five places, so renaming it in the producer left them looking for a
file that is no longer written. CI caught it: the gcp dispatch test asserting a
plan has no audio artifact started seeing one.
Export the name from `@hyperframes/producer/distributed` and consume it in both
adapters. This is the same failure the constant exists to prevent, one package
boundary further out: a literal that drifts from the writer's is a silently
missing audio track rather than a loud error, because both call sites only ever
ask whether the file exists.
* fix(cloud): accept a legacy plan's audio artifact name for one release
Review raised a rolling-deploy window I had flagged but left undecided: `plan`
and `assemble` are separate invocations bridged by object storage, so a
pre-rollout planner can be paired with a post-rollout assembler. Both readers
locate the artifact by existence alone, which makes that pairing a silently
muted video rather than an error. That is reachable enough to be worth two
lines, so reads now accept the old name while writes only ever emit the new one.
Give the fallback one owner (`resolvePlanAudioPath` / `isPlanAudioArtifactPath`)
rather than four call sites, marked for deletion one release out.
Also fixes a hole in the first pass of this: the plan-v2 materializer matched
either name but then joined the CURRENT one, so a legacy plan resolved to a path
that was never written. It now joins the artifact's own name.
Review nits in the same pass: correct the pad-branch docstring, which still
described a concat-copy shape the pad branch stopped using when it moved to
apad + re-encode, and fix the Windows fixture's stale `.aac` output extension so
it cannot model a shape that reintroduces the priming delay.
* test(producer): rebake the missing-host-comp-id golden without the audio delay
The pinned reference was rendered before this branch, so it carries the 1024
sample encoder-priming delay in its audio. With the delay gone the correct audio
now sits ahead of the reference and the harness's envelope correlation drops
below its floor.
Cross-correlating the old and new references at native 48 kHz gives a lag of
exactly 1024 samples (21.33 ms) at a correlation of 0.99985: same audio, moved
by exactly the amount this branch removes. Regenerated inside the CI container
(Dockerfile.test, ffmpeg 5.1.9) rather than natively, so the reference matches
the encoder CI will compare against - the container reproduced CI's failure to
the digit (correlation 0.3938764027803616, lagWindows -12) before the rebake and
passes at correlation 1.0 after it.
Note for archaeology: the new reference is also 3 dB louder than the old one.
That gap is not from this branch - `main` and this branch render the fixture at
the same level - it is pre-existing drift the reference had accumulated, which a
scale-invariant correlator could never see. The rebake absorbs it.
Only output.mp4 is updated. `--update` also rewrites compiled.html, but that
diff is embedded-font churn with no bearing on the comparison, which reports
"Failed at compilation: 0" either way.
* test(producer): rebake the variables-prod golden without the audio delay
Same cause as the missing-host-comp-id rebake, caught by shard-8 once the
earlier shard stopped failing and the rest of the matrix could run: this
reference also carries the encoder-priming delay this branch removes.
Reproduced in the CI container to the digit (correlation 0.42704173048439215,
lagWindows -12), rebaked there, and it now passes at correlation 1.0.
Worth recording: the shift here is 2048 samples (42.67 ms) at correlation
0.99983, exactly twice the 1024 of the other fixture. The delay compounds once
per un-compensated AAC generation, and this fixture's audio needs its duration
normalized, so it takes the pad/trim branch's re-encode and picks up a second
frame of priming on top of the mixer's. So the pre-fix error was not a fixed
21 ms - it grew with the number of times the audio was re-encoded.
All nine shards ran in that CI round with only this one failing, so the matrix
has now covered every fixture against this change.
## What
Refactor distributed planning around one shared local execution-plan builder:
- `buildLocalExecutionPlan()` now owns compile/probe/extract/audio/freeze.
- Legacy `plan()` remains a deprecated v1 transport wrapper.
- Plan v2 calls the shared builder directly and publishes through the existing manifest/CAS contract.
- Add neutral `createPlanV2FromExecutionPlan()`, `publishPlanV2FromExecutionPlan()`, `getPlanV2ExecutionPlanHash()`, and `PLAN_PROTOCOL_V1` names.
- Retain deprecated v1-named exports and wire aliases.
- Recommend explicit Plan v2 opt-in for new producer, Lambda, and Cloud Run integrations.
## Why
Plan v2 previously looked like it invoked a v1 planner even though v1 and v2 share the same frozen local execution representation. This removes that migration-era coupling while preserving the public minor-version compatibility contract.
## How
The shared builder returns neutral internal execution-plan fields. The v1 wrapper maps those fields back to the existing `PlanResult`; the v2 publisher consumes them directly.
Compatibility is intentional and covered by exact shape tests:
- omitted `planProtocol` still serializes/selects `"v1"`;
- v1 layouts, descriptor-less decoding, event unions, workflow branches, and exports remain;
- the v1 descriptor JSON is byte-identical and `CURRENT_PLAN_PROTOCOL` is an identity-preserving alias;
- v2 manifest bytes, key order, hash framing, and `sourcePlanV1Hash` wire key remain unchanged;
- no enumerable neutral hash field was added to manifests or returned result objects;
- v1/v2 result objects, cloud event payloads, and SDK handle key sets remain unchanged.
## Test plan
- Focused Plan v1/v2/protocol/export/size compatibility: 141 passed
- `@hyperframes/core`: 1,419 passed
- `@hyperframes/producer` unit lane: 990 passed
- `@hyperframes/aws-lambda`: 140 passed
- `@hyperframes/gcp-cloud-run`: 101 passed
- Producer, Lambda, and Cloud Run typechecks
- Repository-wide lint, format check, workspace/package-subpath checks
- Full workspace build
- `git diff --check`
- [x] Unit tests added/updated
- [ ] Manual testing performed
- [x] Documentation updated (if applicable)
## What
- enforce a finite, validated `meta/videos.json` contract shared by Plan v1 and Plan v2
- preserve authored finite ends and source-derived trim-aware ends; bound any still-open end at the validated composition end
- fail distributed planning when any declared video source did not extract instead of publishing a blank-capable plan
- make the v1 chunk reader reject malformed/null video timing before frame injection
- route deterministic video-source/metadata failures as non-retryable in AWS and GCP while retaining retries for transient extraction failures
## Why
An open-ended video whose remote source could not be resolved retained `Infinity` through planning. Plan v2 correctly rejected that value, while Plan v1 serialized it as `null`; the v1 frame lookup could then suppress injected frames and silently produce incorrect output.
The invariant belongs at the shared metadata boundary. Both protocols must receive identical finite timing, and unavailable sources must fail closed before plan publication.
## Test plan
- [x] producer distributed planning, metadata, v1 chunk boundary, Plan v2 conversion/materialization, and public exports
- [x] core runtime media semantics (authored slots, natural duration, looping, non-looping hold)
- [x] engine video extraction and frame lookup
- [x] AWS Lambda/CDK/SAM and GCP Cloud Run error normalization/retry classification
- [x] producer, core, engine, AWS, and GCP typechecks/builds
- [x] formatting, oxlint, tracked-artifact, fallow, and commit hooks
- [x] exact incident composition replayed through the AWS Lambda handler's Lambda-local path in a Lambda-like container; Plan v1 and Plan v2 both fail closed as `VIDEO_SOURCE_UNRENDERABLE` during planning, before plan publication
- [x] full PR CI, including all nine regression shards and Windows render/tests
No production flags or deployment/release workflows are changed.
## Summary
- Adds `validateEventS3Uris()`, called immediately after `unwrapEvent()` in the Lambda handler before any S3 I/O.
- If `HYPERFRAMES_RENDER_BUCKET` env var is set, every S3 URI in the event (`ProjectS3Uri`, `PlanOutputS3Prefix`, `PlanS3Uri`, `ChunkOutputS3Prefix`, `ChunkS3Uris`, `AudioS3Uri`, `OutputS3Uri`) must resolve to that bucket. Mismatches throw `S3_URI_NOT_ALLOWED`.
- Env var unset → validation skips (backwards-compatible; existing deployments without the var continue to work).
- CDK stack (`HyperframesRenderStack`) auto-wires `HYPERFRAMES_RENDER_BUCKET: this.bucket.bucketName` so new deployments are protected without manual config.
- `S3_URI_NOT_ALLOWED` added to all three `NON_RETRYABLE_*` lists in the Step Functions state machine so the state machine does not retry on this error.
## Security
**F-004 MED** — The Lambda handler accepted S3 URIs from the event payload without verifying they targeted the function's own render bucket. An attacker who could inject a crafted Step Functions execution input could route `GetObject` / `PutObject` calls to arbitrary buckets in the same AWS account, potentially exfiltrating plan data or overwriting objects in unrelated buckets.
## Test plan
- [x] `handler` rejects a `plan` event whose `ProjectS3Uri` targets a different bucket — `S3_URI_NOT_ALLOWED` thrown, zero S3 ops recorded
- [x] `handler` rejects an `assemble` event with one cross-bucket chunk URI
- [x] Validation is skipped when `HYPERFRAMES_RENDER_BUCKET` is unset (no regression for existing callers)
- [x] All 12 handler unit tests pass
The producer's probe stage launches Chromium when Plan has to resolve
browser-only data: root duration unknown, unresolved sub-compositions, or
data-hf-auto-start media. Only handleRenderChunk was setting
PRODUCER_HEADLESS_SHELL_PATH, so a cold Plan invocation launched
puppeteer-core with no executablePath and failed before writing plan.tar.gz.
Mirror the renderChunk env-var guard inside handlePlan so the bundled
Sparticuz binary gets resolved on the first Plan invocation and reused on
warm starts. The skipChromeResolution dep stays honored for SAM-local RIE
smokes.
A warm Lambda environment can mask this only if it previously served a
renderChunk from another execution and left the env var sticky. Within a
single Step Functions execution, Plan still runs before RenderChunks.
A new dispatch test exercises the guard path by pre-seeding
PRODUCER_HEADLESS_SHELL_PATH and asserting Plan does not overwrite it.
* feat(lambda): add Lambda handler, ZIP bundling, and BeginFrame probe
Phase 6 of the distributed rendering plan: AWS Lambda turnkey adoption
(see DISTRIBUTED-RENDERING-PLAN.md §11 Phase 6 + §15).
This PR adds the new packages/aws-lambda/ workspace package that wraps
the OSS plan/renderChunk/assemble primitives in an AWS Lambda handler,
plus a build pipeline that bundles the handler + Chromium runtime +
ffmpeg into a deployable ZIP.
Architecture: ZIP deploy (not Docker image), Chrome via @sparticuz/chromium
with chrome-headless-shell fallback, dispatch on event.Action ∈ {plan,
renderChunk, assemble}.
The load-bearing concern — does @sparticuz/chromium's chrome-headless-shell
build honour CDP HeadlessExperimental.beginFrame? — is pinned by the new
scripts/probe-beginframe.ts regression guard. Probe boots the runtime
inside public.ecr.aws/lambda/nodejs:22, navigates to a static page, and
asserts beginFrame returns a PNG buffer. Verified locally + inside the
Docker container; both pass with hasDamage=true.
Sizes (sparticuz source): unzipped 157 MiB, zipped 99 MiB. Well under
the 240 MiB / 150 MiB in-house gates and the Lambda 250 MiB hard ceiling.
This is part of a stack of 8 PRs (3 in Phase 6a, 5 in Phase 6b); this is
PR 6.1.
* fix(lambda): address PR 878 review feedback
- Verify event.PlanHash against the untarred plan.json at the handler
boundary before invoking the producer primitive. Throws typed
PLAN_HASH_MISMATCH on divergence so Step Functions routes it as
non-retryable; previously the field was schema bloat the handler
ignored, leaving enforcement entirely inside the producer.
- Standardize on MiB throughout build-zip.ts, verify-zip-size.ts, and
the README. Lambda's hard ceiling is 250 MiB (AWS docs label "250 MB"
but use binary mebibytes); previously mixed units made the 248 MiB
budget look like a ~5 MB margin instead of the 2 MiB it actually is.
- stageChromeHeadlessShell now picks Chrome versions via numeric semver
comparison instead of lexicographic sort+reverse — the latter would
silently pick "99.x" over "131.x" once Chrome cached three-digit
majors that aren't width-aligned.
- Drop _setSparticuzChromiumForTests from the public index barrel.
Test-only DI seam imported directly from ./chromium.js in tests.
- Replace require("node:fs") inside walkSize() with the top-level fs
imports — file is ESM and the same module is already imported.
* docs(lambda): drop internal plan-doc refs from package README
* ci(windows): fix bun filter UNION bug excluding producer from Windows tests
`bun run --filter "!a" --filter "!b" test` composes as a UNION (any
package matching either negation runs), not an intersection. Effect:
@hyperframes/producer was still being tested on Windows even though
it's explicitly excluded — its regression harness (Docker + LFS golden
mp4 baselines) is Linux-only and was driving the 32min timeout.
Enumerate the packages we DO want to test instead.