Commit Graph
1711 Commits
Author SHA1 Message Date
Miguel Ángel 1e711b087d feat(studio): a host can show the hover box and give the stage its starting size (#5116)
* test(studio): pin a host's hover box and a starting stage size

* feat(studio): a host can show the hover box and give the stage its starting size

* fix(studio): keep the comment share flat and let a measured size win over the hint
2026-10-07 09:13:07 +00:00
Miguel Ángel 17c699db4a fix(studio): replacing an image's fill on an img changes its picture (#5170)
* fix(studio): replace image fill through its source attribute

* fix(studio): preserve literal percent image sources
2026-10-07 09:11:58 +00:00
Miguel Ángel 9f09861d2e perf(studio): zooming a long timeline re-decodes and redraws less (#5142)
* perf(studio): reuse filmstrip frames when a zoom changes a strip's width

A zoom that changed a strip's frame count decoded the whole strip again
on the main thread, and showed the clip's single poster frame until it
landed. Frames are now sampled at each slice's left edge, so a strip
twice as long holds every frame of the shorter one; decoded frames are
shared per source and time, so zooming out decodes nothing and zooming in
decodes only the new half. The strip on screen stays until the new width
is ready.

* perf(studio): redraw only the waveforms on or near the screen after a zoom

A zoom resizes every mounted clip, and every mounted waveform redrew in
that same frame, on screen or not. A waveform now draws only while it is
on or near the screen (one shared observer, a screen of margin each side)
and draws when it comes near if a zoom changed it meanwhile.

* perf(studio): never start a beat-analysis stage while the timeline zooms

Analyzing a long music track runs for over a second on the main thread,
and when it started late it landed inside a zoom. The analysis now awaits
an optional pause before each long stage; Studio's waits for the timeline
to rest and the browser to go idle. Results are unchanged. The tempo
detector's stage is one call, so a zoom that starts inside it still waits
for it.

* fix(studio): reuse a filmstrip frame only where its own strip would show it

A shared frame was keyed by the time a strip asked for, not the time it
was decoded at, so a coarse strip's keyframe-early frame could land in a
finer strip and run its frames backwards. A frame now carries its decoded
time and is reused only when the strip would have accepted that keyframe
itself. The frame-count ladder now tops out at a power of two (32), so
its top step shares frames with the one below instead of none.

* feat(studio): show the clip's last frame at the end of every filmstrip

Left-edge sampling never showed a clip's final slice, so an end card or a
fade-out was missing from its strip. Each strip now also decodes the
clip's last frame (at its own time, never an earlier keyframe), shared
across zoom steps like the others, and the last tile shows it.

The strip on screen is now held per clip and range, not per props: a
clip crossing between on and off screen keeps it, and a clip narrowed to
one frame lets it go, so widening again never re-decodes a dropped width.

* docs(studio): keep the filmstrip files at or under main's comment share

The comment ratchet allows no file a higher share of comment lines than on
main; the added explanations move to the PR description.

* fix(studio): keep a held filmstrip leased so a full cache cannot evict it mid-zoom

The hold leased the strip on screen only once a new width was requested,
so for one commit it had no lease; with the cache over budget it was
evicted, the poster showed, and the old width decoded again. The strip on
screen is now leased for as long as it is the clip's, and shown only while
held. A frame that fails to decode takes the frame before it, so every
slot keeps its time and the last tile still shows the end.

* refactor(studio): one owner for which clip a held filmstrip belongs to

The hold checked the clip twice, in its lease and again before showing
it; the lease alone decides now, and the cross-clip test pins it. A test
now also pins that a filled frame is not charged to the cache.

* fix(core): hold the tempo detector until idle after a slow import

* fix(studio): scope shared video frames to timeline sessions

* chore(core): keep beat analysis comments within the ratchet
2026-10-07 07:38:13 +00:00
Miguel Ángel dbb8222c8d fix(studio): catch up the preview after missed file changes (#5126)
* fix(studio): recover previews after missed file changes

* fix(studio): keep queued reloads with the current owner

* fix(studio): keep a queued outside change when switching compositions

* test(cli): the project watcher closes its parent folder's watch too

* fix(studio): keep the project-folder change out of the shared signature check

* fix(studio): keep the edited file's draft and reload every session after a reconnect

A reconnect or replaced folder is a project-wide change: every open SDK session reloads, a failed save is recorded against the file the draft belongs to, and two queued changes to different files merge into one project-wide reload.

* fix(studio): refresh the preview cache when the .hyperframes folder is replaced

* fix(cli): report the files of a folder moved into the project

Replacing a populated folder such as .hyperframes/ now reaches the signature cache through its files, so the shared signature rule stays as on main and Studio's own writes inside .hyperframes/ still invalidate nothing.

* refactor(studio): name the merged file-change payload and share the test sender

* fix(studio): keep a failed draft's recovery copy until that file itself saves

* style(studio): rewrap the merged payload line after the rename

* fix(studio): deliver a held change's full reload when its block clears

A clean save, Use external and Keep Studio now all deliver the merged scope a blocked change owes, and a moved-in .hyperframes folder reports its manifests so a dropped one still clears the cached signature.

* fix(studio): keep restored drafts out of the reload scope and clear the lint gates

* fix(studio): retain held reload scope before React renders
2026-10-07 07:32:16 +00:00
Miguel Ángel eee0c5101c perf(studio): smooth timeline zoom on long projects (#5109)
* perf(studio): coalesce timeline zoom to one write per frame and zoom to a range

* perf(studio): coalesce timeline zoom to one write per frame and zoom to a range

Every zoom input goes through one owner that writes the store once per frame.

zoomTimelineToRange eases to a time range; the zoom buttons use it.

* feat(studio): zoom-to-range reports done or cancelled and is not a person zoom

* perf(studio): place clips in percent of a one-second layer so zoom restyles nothing

A zoom step rewrites one width per row; clip thumbnails start decoding at rest.

* perf(studio): a zoom step re-renders only clips whose drawing it changes

Clip handlers read the lane callbacks when pressed, so a skipped clip never acts on a stale zoom.

* refactor(studio): move at-rest waveform and thumbnail work to its own change

* perf(studio): draw waveforms and decode thumbnails when the timeline rests

Waveforms draw only the visible span of a clip.

A zoom or scroll step stretches what is drawn until the timeline rests.

* test(studio): fade handles measure the clip only while they show

* test(studio): waveforms draw their visible span and redraw at rest

* feat(studio): export currentTimelineRange, the inverse of zoomTimelineToRange

* perf(studio): zoom gestures scale the drawn timeline and lay it out once at rest

No layout or render per gesture frame; past 0.67x or 2x the preview is laid out and continues.

* perf(studio): rebase a zoom preview only past 0.5x or 4x

Clips stay mounted half a viewport each side, so a zoom-out preview to 0.5x shows no gaps.

* fix(studio): keep the zoom readout, edges and Fit right during a preview

The slider and its percent follow a zoom while it is previewed. A zoom in
from below Fit no longer jumps when it lands: the preview now uses the
width the timeline will really have. A zoom-out lays out as soon as it
would show time with no clips mounted, so edges never show empty strips.
Fit, a press or a scroll on the timeline end a pending zoom first. An
older abort no longer cancels a newer zoom-to-range, and an instant one
lands on the next frame instead of inside its caller. Range selection and
gap tints scale with the preview.

* fix(studio): keep a pending zoom when the timeline re-registers its view

The timeline registers its scroll view again whenever clips are added or
removed, which used to drop a zoom still waiting to be laid out. Now only
a real unmount drops it, and unmounting one timeline leaves a newer
timeline's registration alone.

* refactor(studio): share the zoom geometry helpers the timeline already has

Zoom scales come from getTimelinePixelsPerSecond, the range margins from one
helper, and a zoom step starts from the same playhead anchor every zoom uses.
The clip minimum width is named and shared with the drag ghost.

* fix(studio): keep a zoom preview through scrolls and past the content end

A scroll during a zoom preview, including the one a laid-out zoom makes
itself, used to lay the next preview out at once, so a pinch or eased zoom
fell back to a full layout every frame. A scroll now only rescales what it
mounted. Zooming out also lays out before the preview shows past where the
ruler and beat lines are drawn, not only past the mounted clips.

* fix(studio): keep a moved audio clip's waveform drawn where it shows

A waveform now draws the stretch of its clip that the shared strip tracker
reports near the screen, the tracker the filmstrip already uses. It follows
scrolls, resizes and moves (a drag or ripple that shifts the clip), so a
moved clip no longer shows a blank stretch, and a zoom redraws it once.

* perf(studio): lay a zoom-out step out once, at its start

An eased zoom-out (a Zoom out click, or zooming out to a range) used to
lay out partway, once the shrinking preview reached time with nothing
mounted, and again at the end. It now lays the target out first and eases
by scaling that layout down from the old view, so each click lays out
once. Each eased frame also draws its preview in that frame.

* fix(studio): keep previewing a zoom at the content's end and over new rows

The preview now lays out only once it would show past the window the
timeline draws clips, ruler ticks and beat lines in, with two pixels of
slack, so rounding at the content's end no longer lays out every frame.
Rows mounted into the timeline during a preview are scaled before they
paint.

* fix(studio): redraw a waveform when its clip's width changes or it moves

A waveform drawn whole kept its old bars, stretched, after a zoom changed
its clip's width; it now redraws on any resize. A long clip also marks
its undrawn ends for the strip tracker, so a move without a scroll (a
ripple, a drop, an undo) re-measures it instead of leaving a blank
stretch.

* perf(studio): skip the layout when a zoom preview ends on its own scale

An eased zoom-out lays its target out first, so its preview ends on the
scale already laid out. Landing it now only sets the scroll, instead of
writing the same zoom again and counting the person's zoom twice.

* fix(studio): measure filmstrips and waveforms after a zoom preview ends

The strip tracker measured clip boxes while a zoom preview scaled them,
so after a Zoom out click a long clip's filmstrip or waveform could stay
blank across part of the screen. Reads during a preview now wait, and the
tracker re-measures every strip once the preview ends. A zoom-out lays its
target out in its first frame rather than inside the caller, and only when
the new view holds the old one.

* perf(studio): watch a waveform's undrawn ends only when it has some

A clip drawn whole has no undrawn ends, so it no longer mounts the two
empty markers the strip tracker watches; with hundreds of short audio
clips that saved an observer entry each.

* fix(studio): measure strips each time a zoom preview is laid out

A zoom-out lays its target out partway into the ease, after which the
strip tracker kept the stretch it measured before the zoom, so a long
filmstrip or waveform went partly blank near the end of the ease. Every
layout of a preview now re-measures the strips.

* docs(studio): keep the zoom-to-range doc comment within four lines

* docs(studio): keep the zoom files' comment share at or under main's

The comment ratchet failed on ten files this branch touches. Comments are
cut or folded into one line; no code changes.
2026-10-07 00:46:17 +00:00
Miguel Ángel 1825c37268 test(studio): launch real-Chrome tests like the e2e launcher, bounded by the test budget (#5134)
* test(studio): launch real-Chrome tests like the e2e launcher, bounded by the test budget

* test(studio): share the real-Chrome page setup between the two runtime tests

* test(studio): keep the real-Chrome test helper with the other test helpers
2026-10-07 00:25:18 +00:00
Miguel Ángel e6daed3df0 chore: release v0.8.139 (#5136)
* chore: release v0.8.139

* chore: sharpen the v0.8.139 release summary
2026-10-07 00:06:22 +00:00
Miguel Ángel e8cfd6b73e perf(studio): parse saved HTML once when syncing timeline length (#5092)
* perf(studio): parse the saved file once to sync the composition length after a timeline edit

* perf(studio): keep empty duration updates free of parsing

* test(studio): pin one parse for rootless moves and the delete length readout

* test(studio): check the delete's length readout before its save lands
2026-10-06 23:16:21 +00:00
Miguel Ángel dc244d765c fix(studio): drags after a resize, undo or reload land where they were pressed (#5088)
* test(studio): bench moves pressed right after Add keyframe

* fix(studio): an undo that reloads the preview keeps the selection, so a drag after it moves

* fix(studio): a drag started while a resize saves keeps its animations paused

* fix(parsers): an edit pins no position on a keyframed tween it did not touch

* fix(studio): a move pressed while the preview changes lands on the new preview, at the time pressed

* test(studio): bench waiting presses, a held box resized twice, and reloads at the last playhead

* refactor(studio): tidy the waiting press, bound its wait, and freeze edit stamps after early exits

* test(studio): load the property panel once so its first test stops timing out

* fix(studio): presses queued on a held box keep their release, hover and newest outline

* test(studio): judge bench undo by the history groups Studio claims, not by file writes

* refactor(studio): one waiting-box lookup in the bench and one raf-pause write per release

Behaviour-identical tidy of the waiting-press work: the bench reads the waiting
box through one helper, releaseActiveGesture sets the raf pause once, clearPointerState
writes the false it always computed, and previewGestureStarts calls the opts setters
directly instead of through aliases named like the gesture hook's gated setters.

* fix(studio): a queued press lands on the element it pressed and survives a window switch

* fix(studio): undo cancels a waiting press, a stuck save stops holding presses, scene swaps hold them

* refactor(studio): keep the complexity waiver on clearPointerState itself

* fix(studio): undo of a queued press leaves nothing waiting, and hosts keep their own undo

* fix(studio): a waiting press keeps the box still after a blur, and undo reports what it took back

* style(studio): bring the PR's comments within the comment limits

* fix(studio): bank the four bench cases this fixes and meet the comment, complexity and duplication gates

* test(studio): pin that a waiting press is never a pending edit, and name the new duplication waivers
2026-10-06 20:22:37 +00:00
Miguel Ángel b9e511a768 fix(studio): a timeline jump no longer starts thumbnail loads it is about to cancel (#5085)
* fix(studio): a timeline jump no longer starts thumbnail loads it is about to cancel

* fix(studio): pump inline after the release batch, and pin the synchronous slot free
2026-10-06 18:04:50 +00:00
Miguel Ángel 0ca28db4f8 chore: release v0.8.138 (#5121) 2026-10-06 17:53:18 +00:00
Miguel Ángel 5fad52f21d fix(studio): an offline preview says GSAP could not load instead of an unhandled Event (#5111)
* fix(studio): an offline preview says GSAP could not load instead of an unhandled Event

* fix(studio): the preview error list survives a second capture attach without duplicates

* fix(studio): the console capture keeps listening after a long early error list

* refactor(studio): the console capture owns every reset of its findings
2026-10-06 16:35:11 +00:00
Miguel Ángel b9998dd5a8 test(studio): bundle the real-Chrome undo test with esbuild so its setup fits on Windows (#5080)
* test(studio): bundle the real-Chrome undo test with esbuild so its setup fits on Windows

* test(studio): stub only the Node built-ins the undo test bundle reaches
2026-10-06 15:32:53 +00:00
Vance IngallsandClaude Opus 5.5 518694ac66 fix(studio): clip #root so programmatic scrolls cannot push the header off-screen (#5110)
Dockview keeps inactive "always"-rendered panel overlays in the DOM with
visibility:hidden and no position, so each one falls to its static position
below the dock at full dock height. That made the document ~2x the viewport
tall (1954px in a 997px window). body overflow:hidden only blocks user
scrolling, so the scrollIntoView that runs when a property group opens
scrolled the viewport 124px and cut off the header and panel tabs.

overflow:clip on #root (not hidden, which is itself programmatically
scrollable) removes the overflow: scrollHeight drops to the viewport height
and scrollIntoView on a hidden overlay no longer moves anything.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-06 11:03:11 +00:00
Miguel Ángel 43d07781d8 test(studio): keep the undo socket gate's sockets pinned past Chrome's idle media suspend (#5108)
* test(studio): keep the undo socket gate's sockets pinned past Chrome's idle media suspend

* test(studio): the socket gate retries its video scan and says only what its pins prove
2026-10-06 10:52:58 +00:00
Miguel Ángel 8b5b012e5c fix(studio): dragging a Layers row no longer highlights the row names (#5104) 2026-10-06 06:03:20 +00:00
Miguel Ángel e7b69785ea chore: release v0.8.137 2026-10-06 00:39:59 -04:00
Miguel Ángel 4905b4dbca fix(studio): make clip peak warnings plain and hoverable (#5099)
* fix(studio): make clip peak warnings plain and hoverable

* fix(studio): expose peak detail on clip focus above waveforms

* fix(studio): preserve shared badge styling and track test identity
2026-10-06 04:11:06 +00:00
Miguel Angel Simon Sierra 3026723aa1 chore: release v0.8.136 2026-10-05 19:11:20 -07:00
Miguel Angel Simon Sierra 2f9c7dba32 chore: release v0.8.135 2026-10-05 16:49:32 -07:00
Miguel Ángel 3c40f37938 test: pin the guards that keep script-placed scenes and unparseable scripts out of the in-place move (#5079)
* test: pin the guards that keep script-placed scenes and unparseable scripts out of the in-place move

* test: make the script-placed scene check able to fail and pin its page order
2026-10-05 21:54:47 +00:00
Miguel Ángel 0d5e395cd3 fix(studio): keyframed animations keep their ease through every Studio edit (#5051)
* fix(parsers): dragging a keyframe keeps the keyframes' ease

* fix(parsers): splitting a keyframed tween into groups keeps its eases

* fix(studio): keyframed tweens keep their eases when Studio rewrites them

Extending a keyframed tween to the playhead and merging a gesture recording into it now carry the tween's eases and each keyframe's own ease. The parsers no longer report a tween-level easeEach, which GSAP ignores, as the keyframes' ease.

* fix(studio): a gesture merged into a tween writes rounded keyframe percentages

* fix(studio): a gesture merged into an eased tween plays at the times it was recorded

Merged keyframes are placed through the tween's run ease, as the extend path already does, and recorded constant-speed segments stay linear.

* fix(studio): the ease card describes a keyframed tween by its keyframes and eases

The summary line read 'no properties yet using a none curve' for every keyframed tween. It now names the keyframed properties, the keyframe count, the segment ease and the run ease that GSAP plays.

* fix(studio): a gesture merged over a strong ease-out keeps its keyframes and the ones before it

The merge keeps or replaces old keyframes by when they play, and rounds percentages only when the run ease does not warp time.

* fix(studio): the ease card labels an unset segment with the ease GSAP plays

* fix(studio): the ease card header shows the segment ease its rows play

The header shows the one ease every segment plays, or Mixed, and a run ease other than none gets its own line.

* fix(parsers): keyframe percentages are written as decimal keys the parsers read back

A percentage below 1e-6 printed as '1.28e-7%', which both parsers reject. One plainPercentKey owner now writes every percentage key in both writers and the unroller.

* fix(studio): the ease card's segment rows show rounded percentages
2026-10-05 19:18:37 +00:00
Miguel Ángel 98fe011699 fix(studio): undo takes back the last edit, even right after a resize or a nudge (#5048)
* fix(studio): a size edit right after a resize is its own undo step

* fix(studio): a nudge still saving is recorded before the next edit

* fix(studio): published types name cn by its package, not a node_modules path

* fix(studio): drop baseUrl so declarations never name a node_modules path

* fix(studio): an edit started inside the save of another edit never flushes

* fix(studio): an edit made while a nudge is still saving writes after it

* fix(studio): a later edit never overtakes one still waiting on a nudge save

* fix(studio): undoing a gsap.set clears what it applied from the preview

* fix(studio): an edit never waits on itself behind a nudge save

* fix(studio): a second nudge burst saves when its commit runs behind the first

* fix(studio): undoing a W on an animated box clears the width it set live

* fix(studio): any GSAP edit that drops a live-applied set clears it from the preview

* fix(studio): a soft reload clears exactly the set props a live patch applied

* fix(studio): name width and height as set-patch props
2026-10-05 16:52:53 +00:00
Miguel Ángel f7d6734761 fix(studio): Layers rows show a kind icon, and only a group row has a caret (#5067)
* fix(studio): Layers rows show a kind icon, and only a group's row has a caret

Rows show what an element is (image, video, audio, vector, group, text or shape) instead of the tag's first letters. The caret column sits only on rows with children, a group's children indent under its icon, and rows are inset with rounded corners so the selection reads centred.

* style(studio): name the Layers indent and phrasing tags instead of commenting them

* refactor(studio): Layers text and host checks reuse the editor's own rules

* fix(studio): a Layers child's icon starts where its parent's label starts

* refactor(studio): Layers text icon uses the inline editor's text check

* fix(studio): a Layers row with children shows the group icon, and its icon keeps the row's hint

* fix(studio): Layers text with styled spans keeps the Text icon
2026-10-05 16:51:04 +00:00
Miguel Ángel 5d19e23cb4 fix(core): a sub-composition follows its host clip when the host moves without a reload (#5058)
* fix(core): a sub-composition follows its host clip when the host moves without a reload

* perf(studio): move live tweens in place for a sub-composition host's clip too

* fix(core): keep sub-compositions nested where a fresh load nests them across rebinds and re-runs

* fix(studio): match the preview's re-printed script by its tokens and check every other timeline

* fix: compare preview scripts by syntax tree and keep scenes a re-run script places

* fix(parsers): keep a tagged template's raw text and a __proto__ key in the script compare

* fix(parsers): keep only a tagged template's raw text in the script compare

* perf(studio): read each preview script once across repeat timeline drags

* style(studio): format the preview script read test

* perf(studio): keep only script shapes and refresh them on reuse
2026-10-05 16:20:35 +00:00
Miguel Ángel 60fc69d4f4 chore: release v0.8.134 2026-10-05 12:05:03 -04:00
Miguel Ángel 5c7f11ab6d fix(studio): plain elements keep their place and size when keyframed (#5045)
* test(studio): bench a plain element animated through auto-record and Add keyframe

* fix(studio): seed a first tween from the offset a plain move left in CSS translate

* test(studio): bench resize then drag on a GSAP tween, root and nested

* fix(studio): a resize under auto-record keys size at the playhead, held at all times

* fix(studio): keyframe tweens Studio writes end on their last key, so a seek matches playback

* test(studio): keep the plain-to-keyframes moves inside the nested frame

* fix(studio): a resize moves its anchor from the drag stamp it read at release

* fix(studio): an undo shown in place is no longer replaced by an older reload

* refactor: split the trailing keyframe trim and drop an unused GSAP reader

* test(studio): settle the resize-then-drag bench steps so a two-save resize is one undo

* fix(studio): a preview reload waits for an undo shown before its write lands

* fix(studio): Add keyframe reads a subtracted calc() translate with its sign

* refactor: tidy the keyframe hold, trim and resize code after review

* fix(parsers): the keyframe trim leaves looping, chained and relatively placed tweens alone

* fix(parsers): a size hold pins only a lone key, so an edit never changes frames left alone

* fix(studio): every undo applied in place counts as a preview change, script-only ones too

* fix(studio): a resize keys size only when a move or size is keyframed, not a fade

* test(studio): a bench step whose save never lands fails the case

* fix(parsers): holds and trims change only the tweens an edit touches

* test(studio): bank the plain-to-keyframes and resize-then-drag bench cases
2026-10-05 15:46:50 +00:00
Miguel Ángel f5e9c4bea4 chore: release v0.8.133 2026-10-05 08:25:49 -04:00
Miguel Ángel ff8ad1ca25 fix(studio): a row move restacks only the clip you moved, so nothing else goes behind (#5057)
* fix(studio): a row move restacks only the clip you moved, so nothing else goes behind

Moved up, the clip rises above the clips it overlaps on the rows now below it; moved down, it
sinks below the ones now above it, never under z-index 0. Neighbours keep their z, so a
full-frame scene on the top row no longer jumps over a caption moved up a row beneath it.

* refactor(studio): stacking sync comments match the moved-clip-only rule

Drops the stale cascade wording, checks the time overlap before the paint-scope string compare,
and every test case names its move direction.

* fix(studio): a row move restacks only the dragged clip and a move down never hides it

Selected clips that only shifted in time keep their z-index. A move down stops at the clips on
lower rows it paints over, instead of dropping under them when z-index 0 cannot get it behind
the clip above.

* style(studio): drop a comment the drag commit's doc already covers
2026-10-05 12:14:25 +00:00
Miguel Ángel 46d7237f39 chore: release v0.8.132 2026-10-05 07:27:54 -04:00
Miguel Ángel 6bb85af18b feat(studio): a host can hold playback so nothing starts while it is held (#5060)
* feat(studio): a host can hold playback so nothing starts while it is held

* feat(studio): a held player seeks without scrub audio

* fix(studio): a held player neither loops nor changes speed on J and L

* fix(studio): pause clears playing even before the preview has a player

* chore(studio): keep the play hold's comment share flat

* refactor(studio): keep the play hold out of seek's and the subscription's branches

* test(studio): a timeline reset keeps the host's play hold
2026-10-05 11:12:26 +00:00
Miguel Ángel 07d05cc459 chore: release v0.8.131 2026-10-05 07:02:33 -04:00
Miguel Ángel 72d4cc3ef4 fix(studio): a host can claim its writes under the key Studio's edit history uses (#5064)
* fix(studio): a host can claim its writes under the key Studio's edit history uses

* fix(studio): drop the claimKey comment, the comment share may not rise
2026-10-05 10:54:36 +00:00
Miguel Ángel afb266d3fe chore: release v0.8.130 2026-10-05 05:40:59 -04:00
Miguel Ángel 618fd7684b feat(studio): a host app can mount the Layers panel outside Studio (#5049)
* feat(studio): a host app can mount the Layers panel outside Studio

LayersPanel is exported from @hyperframes/studio with an optional host prop carrying the preview iframe, active composition, toast, timeline elements and playing state. Studio's own mount still reads its contexts.

* fix(studio): a layer reorder no longer moves timeline rows a host cannot save

Without a TimelineEditProvider the z-order lane mirror changed the clip's row in the store only, unsaved. It now skips the mirror there. LayersPanelHost is built from Studio's context types.

* chore(studio): keep the lane mirror's comment share flat
2026-10-05 09:19:19 +00:00
Miguel Ángel 198eb10f59 chore: release v0.8.129 2026-10-05 04:53:17 -04:00
Miguel Ángel 8661e8c965 perf(studio): move the live tweens in place after a timeline drop (#5042)
* perf(studio): move the live tweens in place after a timeline move instead of re-running the script

* fix(studio): pair a live retime with the script's own tweens, not the nested composition timelines

* fix(studio): leave the runtime's filler tweens out of a live retime's pairing

* refactor(studio): move the live tweens in their own step of the timing sync

* perf(studio): read nested files only when a timing edit re-runs the script

* fix(studio): move live tweens only when the live timeline is exactly what the script parser read

* fix(core): a rebound timeline is padded and timed like a fresh load

* refactor(studio): decide unknown tween lengths in the plan and check order swaps only on a move

* fix(studio): re-run the script whenever moving the live tweens could differ from a fresh load

* fix(studio): keep trims and reformatted scripts on the fast path, re-run for delays and hosts

* fix(studio): re-run for tweens inside a sub-composition host or that change order on an element

* fix(studio): ignore layout inside raw script values when matching a reformatted preview script

* refactor(studio): check each moved element once and scan nested timelines only for moved targets

* docs(studio): keep the live-retime comments within the merge hook's rules
2026-10-05 08:14:35 +00:00
Miguel Ángel c6478e404c fix(studio): undo takes back the first edit of a film whose media is still being copied (#5043)
* fix(studio): undo takes back the first edit of a film whose media is still being copied

* fix(studio): the first undo of a film repaints the preview in place

* fix(studio): background media copies keep the media ledger and survive a history prune

* fix(studio): a busy project history never makes writes wait for its lock again

* refactor(studio): name the restore stamping instead of commenting it

* perf(studio): undo stamps only a restore side that has no stamps

* fix(studio): closing a project history finishes its media copy first

* fix(studio): media copies stay resumable until recorded and skip a replaced folder

* fix(studio): the history lock wait comes back after a successful open
2026-10-05 08:05:14 +00:00
Miguel Ángel 5765c63244 chore: release v0.8.128 2026-10-05 03:55:42 -04:00
Miguel Ángel b3d2b82fe9 feat(core): the renderer's font pipeline is importable from @hyperframes/core/fonts/embed (#5041)
* feat(core): the renderer's font pipeline is importable from @hyperframes/core/fonts/embed

* style(core): format the font pipeline and state the bundled-subset invariant

* test(producer): repin the test lane map after the font tests moved to core

* fix(core): images build fonts once, CLI bundles one pipeline, font tests pass on Windows

* test(core): font retry tests get a budget no slow machine can exhaust

* test(core): the Retry-After budget test fails when the budget is ignored
2026-10-05 04:54:53 +00:00
Miguel Ángel db12b3e022 fix(studio): place GSAP step lists and duration-less tweens where GSAP plays them (#5024)
* fix(studio): place GSAP step lists and duration-less tweens where GSAP plays them

* refactor(studio): drop narrated comments and unnest the extend clamp

* fix(studio): match keyframes in time, resolve partial step timing, start readout from prior tween

* fix(studio): time step-list keyframes from the parts' last end and format

* refactor(studio): trim comments to the package's comment share

* fix(parsers): apply timeline defaults as GSAP does to step lists and motion paths

* fix(studio): keep GSAP's ease for motion paths with keyframes and read finished tweens

* refactor(studio): read a live motion path in its own step

* refactor(parsers): leave step-list timing to its one owner and skip timeline defaults there

* refactor(studio): move the live motion-path read into its own module

* test(parsers): pin an unresolved length for a step list stretched by a variable duration

* fix(studio): time keyframes linearly under an outer ease that overshoots or steps

* fix(studio): time a converted expression-duration tween from its live tween, and pin no rewrite
2026-10-05 02:44:49 +00:00
Miguel Ángel 2bee99f030 fix(studio): undo no longer snaps back a box you started dragging again (#5039)
* fix(studio): undo no longer snaps back a box you started dragging again

* fix(studio): undo reloads the preview after the drag ends, and the bench checks it

* test(studio): leave the edit bench sequence for the resize-then-drag fix

* fix(studio): the undo reload after a drag also refreshes the restored scenes
2026-10-05 02:02:08 +00:00
Miguel Ángel cd82ce044d perf(studio): drag and resize any number of selected clips, saved in one write per file (#4937)
* feat(studio): hand-move and hand-resize any number of selected clips

* test(studio): bench dragging and resizing every clip, frame cost and drop time

* test(studio): give the bench browser launch the run timeout

* test(studio): bench request timeline offsets

* fix(studio): joining or leaving a multi-clip drag restyles a clip instead of remounting it

* fix(studio): restore the linked-selection import and mark the drag bench complex

* test(studio): find a clip's track row through the per-clip wrapper

* test(studio): resolve track rows through the per-clip wrapper in the remaining cases

* perf(studio): write a group edit's GSAP changes as one request per file

* test(studio): cover the batched GSAP write and keep the owned-chain cases

* test(studio): bench profile of the drag's pointer moves

* perf(studio): sync a group edit's root duration once per file, not once per clip

* feat(studio): a timeline move registers a still-saving revert so Cmd+Z right after it need not wait

* test(studio): the reverted move stays reverted when its save lands

* test(studio): bench prints the heaviest call chain on request

* perf(studio): preflight a many-clip selection against one index of the live tweens

* test(studio): share one timeline across the indexed lookups

* test(studio): bench failure output skips resource 404 noise

* fix(studio): the live-tween index skips timeline entries that are not objects

* fix(studio): the live-tween index skips a null timeline entry

* test(studio): bench reports the first drag frame apart from the steady ones

* test(studio): bench lists inclusive time per function on request

* test(studio): bench reports when the last write of an action landed

* test(studio): bench reports medians of save, frame and first-frame times

* refactor(studio): move the live-tween index out of gsapRuntimeKeyframes to keep it under the line cap

* fix(studio): wire the live-tween index imports and drop an unused test binding

* style(studio): format the files CI flagged

* fix(studio): keep the bench and the scale helper out of fallow's findings

* refactor(studio): one exact tween-index lookup, finish a batch file once, reuse the duration sync

* fix(studio): the tween index lists a tween once per key

* fix(studio): restore the batch-finish and named-parameter helpers

* fix(studio): undo reverts an edit still saving before painting an older predicted step

* style(studio): format the batch duration sync

* chore(studio): keep the new comments within the block and share limits

* test(studio): settle the pending edit even when the undo-order test fails

* perf(studio-server): retime every clip in a GSAP batch with one parse and one hold sync

* test(studio-server): a batch of clip retimes writes what single requests in turn write

* style: format the retime fold and its tests

* perf(parsers): clip matchers in one retime share a DOM query cache

* perf(parsers): look up every clip id in one DOM walk when retiming

* perf(studio): re-resolving the same selected node keeps its source check

* perf(studio): a drop re-renders only the selection that actually changed

* test(studio): report main-thread task time of a bulk drop

* perf(studio): a group drop updates the timeline store once, not once per clip

* fix(studio): re-reading index.html keeps sub-composition keyframes

* refactor(studio): one owner for clip-retime no-op rules and selection options

* fix(studio): reuse a source check only for the same target, and re-check on a new cache version

* fix(studio): undo confirms a reverted save only once its history claim counted

* refactor: split a retime's application out of the one-parse fold; share test fixtures

* perf(studio): drop the per-clip wrapper node so timeline scrolling stays within budget

* refactor(studio): name the drag passenger style after the passenger it styles

* fix(studio): undo keeps a move undone when its history claim landed before the key

* fix(studio): undo a timeline move and its tween shift in one step

* refactor(studio): one owner of a timeline gesture's undo window

* refactor(studio): move single-clip move and resize into their own hook

* fix(studio): a reload or second tab never joins another page's undo step

* fix(studio): a delete and its ripple stay one undo step however late the ripple lands

* fix(studio-server): date a held undo step by its last write, not by the edit that ends it
2026-10-05 01:14:24 +00:00
Miguel Angel Simon Sierra da1ac75718 chore: release v0.8.127 2026-10-04 17:25:23 -07:00
Miguel Ángel cd0d04e4e9 fix(studio): dragging a keyframe's path node keeps the other keyframes where they were (#4946) 2026-10-04 23:54:27 +00:00
Miguel Ángel dc3665ab61 Merge pull request #5038 from heygen-com/release/v0.8.126
chore: release v0.8.126
2026-10-04 16:14:22 -07:00
Miguel Ángel 1bdb5edd93 perf(studio): long clips mount only the picture tiles in view (#4993)
* perf(studio): long clips mount only the picture tiles in view

A clip's picture strip mounted one tile per frame width, so a 10-minute
clip at full zoom mounted 18,000 tiles. The strip-size hook now also
reports the strip's on-screen span (refreshed on scroll, resize and clip
moves), and the video, image and composition strips mount only the tiles
inside it.

* refactor(studio): read the strip span outside the state updater

* fix(studio): a dragged long clip keeps its picture across the screen

The strip refreshed its span only on scroll, resize or a style change on
its own clip, but a drag moves the ghost through a wrapper, so a long
clip's ghost went blank past about 600 px of drag. Each strip now marks
its unmounted ends and re-measures when either nears the screen,
whatever moved it, and commits before paint. The tile row is one shared
ThumbnailTiles for the video, image and composition strips.

* fix(studio): warn of a tile gap inside the timeline scroller too

* fix(studio): clip strips re-measure together, one layout per frame

With row virtualization off the timeline mounts every clip, and each
strip had its own scroll listener and frame that read layout and then
committed. A scroll jump changed every strip's span, so a 1,000-clip
timeline laid out about once per clip per frame (the viewport gate's
1,000-row arm went to ~3 s frames). All strips now share one scroll
listener, observers and frame: every position is read first, then every
update commits in one batch.

* perf(studio): a scroll re-renders only the clip strips crossing the screen edge

A strip's span is clamped to its own measured width, and each strip keeps
its current size outside React so an unchanged size never calls setState.
A clip wholly on or wholly off screen then does no work on a scroll; only
strips straddling the edge re-render.

* perf(studio): a scroll re-measures only clip strips near the screen

The shared frame read every mounted strip's position, so a timeline of
1,000 unvirtualized clips forced about 1,000 style-and-layout passes per
scroll frame. An IntersectionObserver now tracks which strips are within
256 px of the screen; a scroll re-measures only those, and a strip is
measured as it comes near. A clip wholly off screen mounts no tile.

* test(studio): share the strip test setup through the root harness

* test(studio): a strip is measured as it comes near the screen

* fix(studio): a scroll jump measures the clips it brings on screen in the same frame

Each frame moves every strip's last measured box by its scroller's offset
change and reads only the boxes that land within 256 px of the screen. A
jump therefore measures exactly the strips it brings into view, with no
blank frame, at the cost of a short scroll; strips far away get their span
from the moved box without a layout read.

* perf(studio): a strip off either side of the screen keeps one empty span

* perf(studio): a clip strip far above or below the screen mounts no tiles

* perf(studio): a scroll frame leaves off-screen clip strips untouched

* perf(studio): short clips keep every tile and do no work on a scroll

A strip up to 4,096 px wide keeps all its tiles, as before this change,
and a scroll frame skips it; only long clips mount the tiles in view.
Short clips gain nothing from virtualizing and paid a re-render each
time they crossed the screen's edge.

* fix(studio): a scroll is never applied twice to a clip strip's position

Each strip remembers the scroll offset its box was read at, so a strip read
between a scroll and that scroll's frame is not shifted again. The empty-span
guards are removed: a near strip always starts inside itself and a far one
already gets nothing.

* fix(studio): a clip on screen keeps its pictures after a move and a scroll

A strip showing tiles is re-read on every scroll frame instead of trusting
its last box shifted by the scroll, which a move without a scroll (rows
removed above it, a dock resize) leaves stale. Tests now pin the vertical
shift, the 256 px band, the 4,096 px short-clip limit and the tile padding.
2026-10-04 22:54:13 +00:00
Miguel Angel Simon Sierra a9787836e8 chore: release v0.8.126 2026-10-04 15:36:19 -07:00
Miguel Ángel 00553e685c test(studio): the edit bench checks the keyframe rule outside a range and for new property groups (#5011)
* test(studio): the edit bench checks the keyframe rule outside a range and for new property groups

Adds playheads before a range that starts late and after every range to the
keyframed grid, and fails the keyframe rule when an edit makes the timeline
animate a property group (position, size, scale, rotation) on the target that
nothing animated before.

* test(studio): trim the keyframe-rule bench comments to the comment ratchet

* test(studio): split the bench's property-group reader into small steps

* test(studio): bank new keyframe guard cases and match any script tag casing

* test(studio): skip the same non-animated keys as the parser when grouping

* test(studio): bank the keyframe guard cases from this head's gate run
2026-10-04 22:14:32 +00:00
Miguel Ángel b45818f69d fix(studio): the motion path draws on every load, not only when the layer's node is the frame's own (#4957)
* fix(studio): the motion path draws on every load, not only when the layer's node is the frame's own

useMotionPathData found the selected layer with `instanceof` against the preview
frame's HTMLElement. In the Studio preview the body's nodes often carry the editor
window's prototypes (see core's runtime/domRealm.ts), so the check failed, the path
never got its anchor and drew nothing. Core's realm-free isHtmlElement owns that
question; both motion-path call sites now use it.

* fix(studio): every preview node check asks what a node is, not which window built it

Studio checked preview nodes against their document window's own constructors in
seek reapply, studio motion, timeline z-order commits, the manual offset drag and
the z-order menu. On loads where body nodes carry the editor window's prototypes
those checks fail silently, as the motion path did. They now use core's realm-free
predicates, and a source test fails on a new window-bound check.

* fix(studio): the webmcp preview helper asks what a node is, and both realm tests stub the frame

* fix(studio): the last preview node checks ask what a node is, and the guard sees any constructor read

The selector walk read ancestor ids only from editor-realm nodes and the audio group
observer never saw a group the preview added. Both use core's predicates now. The guard
flags any DOM interface read off an object, the spellings it missed included, and the
window gates the old constructor needed are gone.

* test(studio): cover the main seek filter across windows and split member reads

* fix(studio): a press on the motion path's line inside the selected layer moves the layer

* fix(studio): a press inside the selected layer moves it, and path nodes sit where the layer is

* refactor(studio): one helper places a path point, for keyframes and the start

* fix(studio): a handle over a path node takes its press; nodes sit right on centred layers

* fix(studio): reading a layer's path anchor leaves its CSS translate alone

* chore(studio): keep the motion path home file under the comment share

* fix(studio): a new motion path ends where you click on a CSS-centred layer

* fix(studio): a path made on a transform-centred layer ends where you click

* style(studio): keep a motion path test comment within 120 columns
2026-10-04 22:08:29 +00:00