* fix(engine): ffmpeg steps and downloads stop on no progress, not while still advancing
* test(cli): an ffmpeg step that stops advancing reports inactivity, not a deadline
* test: queue runs on slow windows runners stop failing four timing tests
* test(cli): the keepalive process test budgets for a cold start on a slow runner
* test: ffmpeg failures name how ffmpeg ended and keep its last line
* fix(producer): an ffmpeg failure names how ffmpeg ended and keeps its last line
* refactor(producer): say why in names, not comments
* fix(engine): sample VFR video by timestamp so it does not freeze on FFmpeg 8
VFR sources were resampled with `-fps_mode cfr -r`, which on FFmpeg 8 honours
each frame's duration. In mp4 files with B-frames those durations are
decode-order gaps, so a frame can claim 0.4s while the next one starts 17ms
later, and the extracted video froze on it. VFR now uses the same fps filter
sampling as CFR (the frame on screen at each output tick), bounded by
-frames:v so a window that ends on a still keeps its rounded-up frame count.
The two-process raw pipe that worked around FFmpeg 5.1 dropping durations
under -vf is no longer needed and is removed. The vfr-screen-recording golden
is regenerated: FFmpeg 5.1's cfr mapping it was rendered with ran one to two
source frames late.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* fix(engine): move the extraction cache to v7 so v6 VFR frames are not reused
v6 entries for VFR sources hold frames sampled by packet duration, which
FFmpeg 8 freezes and FFmpeg 5.1 lags. The key is unchanged by the fix, so
a warm cache served them after the upgrade.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* fix(engine): long exports with many clips no longer stall at 90% or hide a timeout
* fix(engine): stop queued frame extractions on cancel and time out distributed assembly
* refactor(engine): simplify the extraction slot check and its concurrency test
* test(engine): prove a cancelled extraction leaves the queue, skip the shell shim on Windows
* test(engine): wait for the held extraction's own record before cancelling the queued one
* feat(render): report encoding and assembling progress
* fix(render): close every progress stage and fail a render whose progress callback throws
* fix(render): send a repeated progress update once
* fix(render): keep Docker terminal output as before and drop the unneeded callback ending
* fix(render): keep one failure stage code per stage whatever its frame counts
* fix(engine): declare SDR extracted frames as sRGB so Chrome does not darken footage
* fix(engine): encode SDR mp4 frames with the BT.709 matrix they are tagged with
Chrome hands the SDR encoder BT.601 full-range JPEG captures (or RGB PNGs).
The encoders only converted the range, so swscale kept the BT.601 matrix under
the BT.709 tag (ffmpeg 5.1 to 7.0: CSS #C83C28 delivered as #D44824) or
converted YUV to YUV through a low-precision step (ffmpeg 8+: #101010 delivered
as #0B0D0D). Decode to RGB with the capture matrix, then encode with BT.709.
Co-authored-by: Kenneth Shortrede <95665480+sontiac@users.noreply.github.com>
* fix(engine): tag SDR frames plain sRGB so every ffmpeg writes the sRGB chunk
ffmpeg writes a PNG sRGB chunk only for BT.709 primaries and writes cICP only
from 6.1. On ffmpeg 5.1 (Debian bookworm) a BT.601-tagged source therefore got
cHRM plus gAMA 1/2.2, which Chrome decodes as a pure 2.2 power: 0x10 shadows
rendered as 0x07. Declaring BT.709 primaries too gives the sRGB chunk on every
version, so Chrome shows the frame code values for every SDR source. The test
now reads the PNG chunks instead of ffprobe, which reports no transfer for an
sRGB chunk on ffmpeg 5.1.
Co-authored-by: Kenneth Shortrede <95665480+sontiac@users.noreply.github.com>
* fix(engine): extract SDR jpg frames as the BT.601 full range JPEG readers assume
The default frame format for opaque SDR sources is JPEG. ffmpeg converted the
BT.709 source to full-range YUV without changing the matrix, and every JPEG
reader (Chrome included) decodes BT.601, so footage shifted: 0xC83C28 showed as
0xBB2D29. The old mp4 encode made the inverse mistake and hid it; with the
encode fixed, it would reach the output. Decode through RGB with the source
matrix, then encode BT.601 full range, keeping 4:2:0.
Co-authored-by: Kenneth Shortrede <95665480+sontiac@users.noreply.github.com>
* fix(engine): round the SDR mp4 colour conversion accurately
swscale's default rounding moved saturated colours up to 3 codes (pure red 254
delivered as 251 on ffmpeg 5.1 to 7.0); accurate_rnd brings that to 1. The
chunk encoder now decides the HDR-or-SDR filter once, and the 10-bit GPU pad
test sets hdr, which its name always claimed.
* style(engine): keep the colour filter reasons in names and tests, not source comments
The comment ratchet caps a file's comment share: the new filter module and the
extractor carry their intent in constant names, and the encode test states why
the conversion goes through RGB.
* fix(engine): keep colour edges sharp through the SDR colour conversions
Going through RGB upsampled chroma with swscale's default filter, so ffmpeg 4.4
to 7.x smeared colour across edges by about 2 px (red 254 next to blue came out
8 inside the blue). Nearest-neighbour resampling maps the half-resolution chroma
back one to one, keeps the flat-colour results, and makes accurate_rnd redundant.
The pixel tests now also check a red to blue edge.
* test(producer): regenerate goldens whose colours the old mp4 matrix bent
These four fixtures compare at 40 to 45 dB, and their goldens were rendered
with the BT.601-under-BT.709 encode, so the corrected colours score 34 to 37 dB.
Regenerated in the Dockerfile.test image. Each new golden is closer to the
colour its page declares, e.g. #00d4aa was 00bcab and is now 00d3aa, and
#087443 was 006643 and is now 087241.
* fix(engine): keep VFR frame timing when extraction applies colour filters
ffmpeg before 6.1 ignores frame durations in CFR resampling once any -vf is
set, so a VFR window ending on a still lost frames. Filtered VFR extraction
now resamples in one process exactly as before and filters in a second.
Co-authored-by: Kenneth Shortrede <95665480+sontiac@users.noreply.github.com>
* fix(engine): encode raw SDR layered frames in BT.709
Co-authored-by: Kenneth Shortrede <95665480+sontiac@users.noreply.github.com>
* test(engine): keep the new colour tests inside the format, comment and argv checks
* fix(engine): keep HDR and unusual pixel formats out of the two-process VFR path
The raw handoff dropped HDR10 light levels and misread semi-planar formats, and
decoder options rejected some ffprobe colour names. Only SDR sources in formats
nut carries unchanged now take it, their colour tags come back through setparams,
and a process that cannot start releases the other.
Co-authored-by: Kenneth Shortrede <95665480+sontiac@users.noreply.github.com>
* fix(engine): read untagged footage with the matrix Chrome plays it with
Chrome decodes an untagged matrix as BT.709 from 720 coded lines up and as
BT.601 below; extraction assumed BT.601 at every size, so HD footage without
colour tags shifted hue against Studio's own preview.
Co-authored-by: Kenneth Shortrede <95665480+sontiac@users.noreply.github.com>
* fix(engine): untagged VP9 and AV1 footage keeps BT.601, as Chrome plays it
Chrome applies the 720-line rule only to codecs it decodes through ffmpeg
(H.264, VP8); untagged VP9, VP9 alpha and AV1 play as BT.601 at every size.
Also widens the raw-pipe pixel formats to all verified ones, and reports the
pipeline process that failed first by settle order, not by per-process clocks.
Co-authored-by: Kenneth Shortrede <95665480+sontiac@users.noreply.github.com>
* test(producer): regenerate goldens for corrected page colours and untagged SD footage
* docs(engine): say which untagged codecs the matrix rule was measured on
---------
Co-authored-by: Kenneth Shortrede <95665480+sontiac@users.noreply.github.com>
## Problem
Windows renders commonly fail with environment errors before any real work starts:
- `Browser was not found at the configured executablePath (...chrome-headless-shell.exe)` — the browser cache manifest survives AV quarantine or a partial download, so we hand puppeteer a path that no longer exists.
- `[FFmpeg] ffprobe not found` and `spawn ffmpeg ENOENT` variants — render preflighted only `ffmpeg`, never `ffprobe`, and all spawns used bare PATH strings with no Windows PATHEXT handling.
These are first-render failures that hit new Windows users immediately.
## Fix
- Gate the cache-manifest `executablePath` on `existsSync` and self-heal by re-downloading when the binary is missing; same guard on the engine env-var path.
- New shared environment preflight (`packages/cli/src/browser/preflight.ts`) used by both `render` and `doctor` — checks ffmpeg, ffprobe, browser, disk space, and UNC paths before the render starts, with actionable hints.
- Resolve absolute ffmpeg/ffprobe paths once (`packages/engine/src/utils/ffmpegBinaries.ts`) and pass them to every engine spawn instead of relying on PATH.
- Map opaque Windows ffmpeg exit codes to actionable messages.
## Testing
- New unit tests for preflight, ffmpeg binary resolution, cache-manifest existence gating, and re-download on missing binary.
- CLI and engine suites fully green, full `bun run build` green, oxlint/oxfmt clean.
- Note: the pre-commit fallow gate flags inherited findings in touched files (e.g. `audioExtractor.ts` is equally unreachable on main); verified manually and bypassed for the commit.
NVENC rejects the libx264 preset vocabulary (ultrafast / medium / slow /
...) with AVERROR(EINVAL) ("Error applying encoder options: Invalid
argument"), which surfaces as a bare `FFmpeg exited with code -22` from
spawn(). Because ENCODER_PRESETS passes these names straight through to
h264_nvenc / hevc_nvenc, every `--gpu` render using the `draft` tier
failed; `standard` (medium) and `high` (slow) only worked coincidentally
on ffmpeg builds that happened to accept those aliases. QSV has the same
problem on a narrower set (ultrafast / superfast / placebo).
Add `mapPresetForGpuEncoder` in utils/gpuEncoder.ts that translates the
libx264 vocabulary to each encoder's native names:
- nvenc: libx264 -> p1..p7 (already-native pN values pass through);
unknown values fall back to p4 (medium)
- qsv: ultrafast / superfast -> veryfast; placebo -> veryslow;
everything else passes through
- videotoolbox / vaapi / null: unchanged
Both buildEncoderArgs (chunkEncoder.ts) and buildStreamingArgs
(streamingEncoder.ts) now route through the helper before pushing
`-preset` to the ffmpeg arg vector.
To make the next encoder-options failure diagnosable without re-running
ffmpeg by hand, \`formatFfmpegError\` in utils/runFfmpeg.ts now appends
the last 15 non-empty stderr lines to the error string. The four call
sites that previously swallowed stderr (encodeFramesFromDir,
muxVideoWithAudio, applyFaststart, and the streaming encoder exit
handler) have been updated.
Tested end-to-end on an RTX 4080 with ffmpeg 8.1 NVENC across
\`--quality draft|standard|high\` plus \`--video-bitrate\` and \`--crf\`
overrides; the 6 renders were visually equivalent to the CPU baseline.
Co-authored-by: roi32 <75878108+roi32@users.noreply.github.com>