* fix(engine): renders reach only public addresses from every part of the browser
* fix(engine): renders reach only public addresses from every part of the browser
* fix(engine): renders reach only public addresses from every part of the browser
* fix(engine): renders reach only public addresses from every part of the browser
* fix(engine): look a host up again after a failed lookup instead of refusing it for the whole page
* fix(engine): name the failed-lookup reset instead of commenting it
* fix(engine): hold the render page to the asset download address rules
With PRODUCER_RESTRICT_PAGE_NETWORK=true the render page reaches only its own project server and public addresses, checked by host and by resolved address, the rule asset downloads already follow. Unset, nothing changes for local renders.
* fix(engine): keep the page network filter comment within four lines
* fix(studio-server): check and render keep their history on a drive without hard links
The history lock had its own list of the errors that mean a drive cannot
hard-link, and it lacked EISDIR, which Windows returns on a Google Drive
folder. Every check report and render record there failed. The lock now
uses core's list, the one owner, which also gains ENOSYS from the lock.
* fix(engine): downloads and plan blobs publish on a drive without hard links
The producer's plan publisher kept a third list of no-hard-link errors
without EISDIR, and the downloader had no fallback, so both failed on a
Google Drive folder. Both now use core's cannotHardLink; the downloader
copies into an exclusively created file, so it still never overwrites.
* fix(engine): a download on a drive without hard links publishes atomically
Instead of copying into an exclusively created file, the fallback renames
the staged download into place under the cache path lock when nothing is
there yet, so a killed run never leaves a truncated file to reuse.
* fix(engine): an unrecognised capture failure is unknown, not the author's fault
* fix(engine): carry the extractor's disk-full words in a name, not a comment
A caller that runs several renders at once sets HYPERFRAMES_OWNER to a per-run id; every browser the CLI or
engine launches and the warm check server carry --hyperframes-owner=<id>, so the caller can tell one run's
leftovers from another's.
Raise the direct ranges so the workspace and published packages resolve
patched releases: tar 7.5.22, hono 4.13.16, @hono/node-server 2.1.6,
adm-zip 0.6.1, sharp 0.35.5 and postcss-selector-parser 7.1.7. The CLI's
on-demand sharp install moves to 0.35.5 with them.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
oxfmt 0.41 pins tinypool 2.1.0 (GHSA-5gmw-xhrv-c9v3, GHSA-85c8-ppgw-ccpr).
Every oxfmt release before 0.67 pins 2.1.0, and 0.67+ reformats 66 files,
so override tinypool to the drop-in 2.1.2 patch instead of bumping oxfmt.
Also bump vite ^6.4.2 -> ^6.4.5 and vitest/@vitest/coverage-v8
^4.1.11 -> ^4.1.12 (pulls @vitest/mocker 4.1.12).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
puppeteer-core 25.13.0 moves chromium-bidi to 157.0.8090-0, which depends on
zod ^4.6.5 instead of ^3.24.1. Lifts the engine/producer puppeteer pin from
~25.11.0 to ~25.13.0, keeps one puppeteer-core and one @puppeteer/browsers
(3.2.4) across the workspace, and updates both Lambda runtime locks with a
targeted npm resolution so only the puppeteer subtree changes.
Clears GHSA-mrhx-c7xc-m3w5 in both runtime locks.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(engine): keep media ids that differ only by case in separate folders
macOS and Windows disks ignore case, and APFS ignores Unicode normalization,
but mediaIdPathSegment passed plain ids through as written. Two clips such as
`s12-vB1` and `s12-vb1` therefore shared one `__hyperframes_video_frames`
folder: whichever was staged first kept it, and the other clip read its
frames. A longer clip then failed mid-render with ENOENT on a frame past the
shorter clip's end; a same-length pair rendered the wrong footage silently.
Only a lowercase, NFC-normalized id now maps to itself. Any other spelling
gets the existing readable~digest form, so every per-id path (frame folders,
the tail probe, audio work files, distributed plans) stays distinct on a
case-insensitive disk.
* fix(engine): name the case-folding check instead of commenting it
Keeps mediaPathSegment.ts at or under its comment share at the merge base.
The startup diagnosis rebuilt its env from process.env, so a launch that
dropped WAYLAND_DISPLAY or the SwiftShader Vulkan pins was diagnosed with
them restored. The engine and CLI now pass the failed attempt's env through
explainChromeLaunchFailure; process.env stays the fallback when no env is given.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(engine): launch Chrome with only the env it needs
Every Chrome HyperFrames starts (render, GPU probe, HDR capture, startup
diagnosis, version and shell probes, CLI browsers, inspector) now gets an
allowlisted environment from @hyperframes/core/chrome-env instead of the
whole process env. HYPERFRAMES_CHROME_ENV_PASSTHROUGH names any extra
variable a host needs.
Refs #7623
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(core): keep the Chrome env passthrough across repeat filtering
The CLI GPU probe filters its env twice, which dropped the names
HYPERFRAMES_CHROME_ENV_PASSTHROUGH adds, so the probe and the render
saw different envs. Keep the passthrough variable itself.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
When a sandboxed Linux launch fails and the no-sandbox retry also fails,
the startup diagnosis re-ran Chrome with the first attempt's flags, so it
described a launch that was not the one reported. The engine and CLI now
diagnose the flags of the attempt that produced the error.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(engine): keep Chrome's sandbox on for local renders where the host supports it
Chrome launched with --no-sandbox on every host. Keep the sandbox on
macOS, Windows and non-root Linux outside containers; drop it as root,
in Docker/Podman/Kubernetes, on Lambda and Cloud Run, and where Linux
restricts unprivileged user namespaces. --no-zygote now ships only with
--no-sandbox, since Chrome refuses it while sandboxed. A sandboxed Linux
launch that fails at startup retries once without the sandbox and warns.
HYPERFRAMES_CHROME_SANDBOX=1|0 overrides the choice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(cli): cover the Linux sandbox retry in managed browser launches
The off-macOS closed-pipe case now passes --no-sandbox, so it still
pins "no seatbelt relaunch" rather than the new Linux sandbox retry,
which gets its own case.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(engine): honor HYPERFRAMES_CHROME_SANDBOX=1 and latch the fallback on clear evidence only
With the override set to 1, a sandboxed launch Chrome refuses now fails
instead of retrying unsandboxed. A bare startup exit (TargetCloseError)
retries that launch without the sandbox but only latches the sandbox off
after a second one, so a single unrelated early kill no longer disables
it for the rest of a long-lived process. Chrome naming the sandbox in its
error still latches at once.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A mover that moves further than its own width between frames leaves gaps in a
trail built from whole-frame blur-off poses; the shutter's smear lands in them and
read as a leak outside the trail (nightly seed 63098). The mask now adds the
shutter's sub-frame poses, captured in time order. Seed 63098 joins the default
seeds as the regression case.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): check hears a WAV whose header misstates its byte rate, as render plays it
A PCM WAV whose header byte rate is wrong (some speech generators write 2x) sent the silence decode's input seek past the file's end, so every clip past the middle was reported audio_clip_silent. Render already cuts such a file by decoded time (#7541); the byte-rate rule now lives in parsers and the CLI decoder seeks after decoding starts for those files.
* test(cli): keep the misstated byte-rate case with the other single-clip checks
* style(cli): format the WAV test helper
* style(parsers): keep the byte-rate rule's comment within the line limit
* chore: release v0.9.37
* docs(release): add #7576 to v0.9.37 notes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* chore: release v0.9.35
* docs(release): note the render stop and container 403 from #7563 in v0.9.35
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli,parsers): take helper programs only from install locations, never the project folder
FFmpeg, FFprobe, whisper-cli, parakeet-mlx, Python and system Chrome are now
found through one shared rule: an absolute PATH entry outside the working
directory, or a fixed install dir. A relative PATH entry and any folder
inside the working directory are skipped, on every platform. Windows walks
PATH itself instead of asking `where`, which lists the working directory
first.
FFmpeg discovery no longer falls back to `.hyperframes/bin` or to an
installer package in the project's node_modules; an installer package
installed next to HyperFrames still works. The env overrides are unchanged.
The CLI skill reference stops suggesting the project-local folder.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(cli): give the PATH-lookup tests a fixed PATH on Windows
Windows now walks PATH instead of running `where`, so tests that faked
`where` output found the runner's real python and cmake. Both tests now set
PATH to a temp folder holding only the programs they expect.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix: report a missing helper program instead of running it by bare name
When no trusted FFmpeg or FFprobe is found, the engine, the producer's
probes and Studio's waveform, peak and audio-track helpers now report
"not found" with the HYPERFRAMES_FFMPEG_PATH / HYPERFRAMES_FFPROBE_PATH hint
instead of handing the bare name to the OS lookup. Callers that degraded
on a missing binary still do: runFfmpeg returns a spawn_error result, the
GPU and version probes report none, and Studio's audio helpers fail soft.
The Lambda handler names its bundled ffmpeg and ffprobe by path, since
they live under the task root, which is the working directory.
brew, git and cmake for the whisper.cpp install, and the clipboard tool
for `hyperframes add`, run by the absolute path the trusted lookup
approved. The media-use engine gets a PATH holding only trusted folders.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(engine): fail a missing FFmpeg the way a failed spawn always has
Throwing from getFfmpegBinary turned every caller's missing-binary path
into a synchronous throw: the streaming encoder's "failure result, not a
throw" contract broke, and unit lanes that run without FFmpeg crashed at
module load. With no trusted copy the getters now return an absolute path
inside HyperFrames' own install that is never created, named for the
override to set. Spawning it fails with ENOENT exactly as before, and the
OS still never looks the bare name up. The call-site guards and fixture
changes that the throw needed are reverted.
The whisper install tests match git and cmake by name and skip the brew
case on Windows, where the lookup walks the real PATH.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(engine): pin the found FFmpeg before the HDR test looks it up as macOS on Windows
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* feat(producer): fail a render whose variables the page does not declare
* chore(producer): keep the comment share and the dead-code audit clean for the variables check
The test checks that clips read from a URL are not held to the CPU-sized
prepare limit. On 32 or more cores that limit reaches the URL limit of 16,
so the test could not pass there. It now fixes the core count at 8.
* feat(cli): share rendered videos through unified reviews (#7135)
* feat(share): attach editable project sources to reviews (#7137)
* feat(share): measure local sharing outcomes (#7138)
* feat(cli): stage the sixty-day publish transition (#7136)
* feat(studio): share review pages from local preview (#7140)
Advertise the CLI sharing bridge before bootstrapping it so standalone Studio does not
request unsupported routes. Preserve origin and session checks.
Budget the intended sharing artifact: clean main packs at 8,060,519 bytes versus
8,162,979 with sharing (8,169,168 in CI). Required policy and Unicode tables, bundled
sharing code, and Studio controls account for the growth. Set the packed-only budget
to 8,577,627, following the 5% headroom convention; retain the unpacked cap and all
package checks.
* fix(share): persist refusals and improve CLI retry feedback
* fix(ci): restore render diagnostics and include sharing workspace
* fix(cli): keep sharing owner error codes stable
* fix(share): clarify update feedback and align audience changes
* fix(share): clarify updates and avoid scratch-file rerenders
* fix(cli): report active shares and preserve update channels
* fix(cli): resolve update channel when checking registry
* fix(ci): refresh sharing package budgets after rebase
* fix(share): require consent before uploading project files
* perf(engine): check still frames once per page and share the result with later sessions
* perf(producer): the probe skips the still-frame check unless its session captures
* chore(engine): keep the comment share of the deferred still-frame check files at their base
* fix(producer): the probe session's deferred still-frame check counts as stall-watcher activity
* docs(engine): the still-frame spot-check range is the task's span, not only its own frames
* fix(engine): a reused fast-capture probe session keeps still-frame reuse
* fix(engine): offset clips from a WAV with a wrong byte rate play the right sound to their end
A WAV header that states twice its real byte rate sent the mixer's input seek
to twice the clip's in-point: the clip played later words, then silence. Such a
source is now cut by decoded timestamps instead of by a byte seek.
* refactor(engine): let the byte-rate flag's name carry the seek rule