Commit Graph
13 Commits
Author SHA1 Message Date
Vance IngallsandClaude Sonnet 5.5 07824098e9 test(engine): blur gates fail on CI when they cannot run, and prove blur drew (#7302)
* test(engine): blur browser tests fail on CI when their browser cannot run

On CI a missing Chrome, a missing core runtime build or a Chrome without drawElementImage
fails the suite's beforeAll instead of skipping every case. Off CI the suites still skip.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test(engine): every inside-the-trail case proves blur drew, not only held-card

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test(engine): the liveness test watches held-card through its slide-out

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test(producer): stateful-callback joins the multi-worker blur render, split across five suites

The render differential's suite moves into __test_utils__/blurRender.ts and five files run it
over one or two fixtures each, so none nears the flake gate's 120 s cap. Every fixture that
moves must now blur more than insideMaxMae, not only held-card, and CI fails instead of
skipping when ffmpeg is missing.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test(producer): each blur render file imports its runner so the test classification reads it

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-06 09:49:18 +00:00
Vance IngallsandClaude Sonnet 5.5 968f97fe95 feat(producer): render long videos with windowed source frames behind a flag (#7242)
* feat(producer): render long videos with windowed source frames, behind HF_VIDEO_FRAME_WINDOW

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(producer): windowed calibration sees real frames, and the late full extraction reports itself

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* test(producer): windowed frames match a full extraction, frame for frame

Renders ten compositions twice on the segmented route, with and without
HF_VIDEO_FRAME_WINDOW, and compares FFmpeg framemd5 of the two outputs: a
mid-clip start, NTSC 24000/1001, a loop crossing a slice edge, a playback-rate
ramp, a held tail, two clips of one file, a VFR source beside a CFR one, two
workers, auto workers (capture calibration runs), and motion blur, which
declines the window. Each pair must also report the same capture mode.

A separate test samples segment-frames during a four-segment, two-worker
render and holds its peak under workers x segment frames x the largest frame
file x 1.2, and checks the folder is empty once the render closes.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test(producer): windowed frames test finds its own work dir and asserts what it claims

Find the render's work dir with resolveRenderWorkDirPrefix and the owner record's pid, so
the peak test works on Linux and never samples or deletes a concurrent render's dir.
Assert the measured worker count, calibration, and the exact up-front frame count of the
VFR video. Retry a dead Chrome only with HF_TEST_RETRY_BROWSER_STALL=1, and fail a case
whose windowed render alone needed it.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* fix(producer): windowed segments honour keep-segments and cleanup never fails a render

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* refactor(producer): trim the comments the windowed frames route added

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* test(producer): the VFR-beside-CFR extraction test moves to the integration lane

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* chore(producer): raise the package size budget for windowed video frames

The new segment frame modules add about 9 KB to the packed producer package.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* test(producer): windowed frames header says what the real runs measured

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-05 11:27:10 -08:00
Vance IngallsandClaude Opus 5.5 35cbca9927 refactor(producer): deferred frame extraction moves out of the distributed code (#7240)
* refactor(producer): deferred frame extraction moves out of the distributed code

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* test(producer): the real-ffmpeg deferred extraction test moves to the integration lane

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-05 09:45:12 -08:00
Miguel Ángel d40d0b251f fix(producer): an export over the peak ceiling loses only what it must (#7246)
* fix(producer): an export over the peak ceiling loses only what it must

The delivery limiter cut every peak over -1 dBTP down to -3, a fixed 2 dB margin for its detector. It now limits at -1, measures the encode, and lowers the ceiling only by what that encode measured over.

* fix(producer): the delivery limit test runs in CI and one pass is its own step

* test(producer): build the loudness reference from the 16-bit track the mixer reads
2026-11-05 16:20:28 +00:00
Vance IngallsandClaude Sonnet 5.5 d36cad7985 test(engine): pixel invariants and fixtures that guard default-on capture blur (#7108)
* test(engine): pixel invariants for capture blur against blur off

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test(engine): fixtures for every capture blur failure class seen so far

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test(engine): nested canvas fixture reproduces #6975, sharp-tile fixtures have no moving times

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test(engine): capture blur must match blur off outside the trail and the shutter average inside it

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test(engine): differential tests pin known bugs by symptom, history test checks the reference frame

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test(engine): a playing preview keeps changing with blur on

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test(producer): a multi-worker blur render must match blur off outside the trail

Renders five blur fixtures through the real producer as a PNG sequence with 4
workers (contiguous blocks, three of them starting mid-film, the #6967
condition): blur off twice, blur on once. Outside the trail of everything that
moved, blur on must equal blur off in every frame with two neighbours. The
callbacks and scroll-list known differences are pinned by symptom.

Import route: a relative import of blurDifferential.ts, fixtures.ts and
thresholds.ts from packages/engine/src/services/__fixtures__. The producer
tsconfig excludes test files, so I type-checked the file with a temporary
tsconfig (rootDir widened); no error. No package subpath was needed.

RENDER_OUTSIDE_MAX_MAE: render noise is 0 (blur off, twice, bit-identical), the
rewind mutation measured 111.085 when caught, so the 1.0 floor applies.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test(producer): render callbacks with workers that start between its calls

With 4 workers the blocks started at 0, 15, 30, 45, each on a call, so the
rewind mutation showed in a render only 3 times in 5. Seven workers over 60
frames start at 0, 9, 18, 27, 36, 45 and 54, two of them strictly between the
calls at frames 16 and 30; the mutation then fails callbacks in 8 of 8 runs
(worst MAE 97.02), the clean build in none.

A new case checks the partition with distributeFrames. The #list and #label
rects now come from the fixture's markup, and MEASURED_RENDER_REWIND_MUTATION
is 97.02.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test(engine): blur pins bound the symptom, liveness detector reports blindness, fixtures time out

Pinned known bugs now require every bad tile inside the pinned region and a worst
MAE within half to double of the measured one. tileTouches, Rect and the band check
move into blurDifferential.ts with a dpr 2 unit test. The blank-frame census counts
canvases it cannot read and asserts none, and names both readings when no blank frame
is seen. No console.info on passing runs. Fixtures cases get a 30 s timeout.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test(producer): scroll-list render case bounds the race, pins share the engine helpers

The scroll-list loss depends on timing per worker block, so the case now requires
frames 2..27 clean and any later bad tile inside #list, without requiring the loss.
The callbacks pin keeps requiring its symptom, bounds it to the label and to half to
double of its measured size, and its message names the entry to delete. Wording says
multi-worker, not 4-worker.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* build(engine): keep the blur test helpers out of the published tarball

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test(engine): print the worst outside tile of each arm to explain the CI text diff

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test: both arms draw grayscale text so host subpixel settings are not read as blur

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test(producer): run the multi-worker blur render alone so it cannot skew other Chrome tests

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test: re-pin the producer lane runner after splitting out the heavy blur render

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test(engine): read the blank-frame pin from a wrap observer, not an animation frame poll

The pin sampled in requestAnimationFrame, so it could miss the gap between the
wrap and the first draw. A MutationObserver now reads the output canvas the
moment the root is wrapped, which is deterministic, and every fixture must
report a wrapped root.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* test(engine): drop the blurs field no fixture could set to false

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* ci: give the flake gate 60 minutes, it budgets runs by file count not time

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-04 17:55:07 +00:00
Jerrai 346f0e49fa feat(producer): report browser-computed reference backgrounds (#7007)
* feat(producer): report browser-computed reference backgrounds

Preserve one initial root/page reference across local, streamed and distributed
render results without guessing from film pixels.

— Jerrai

* fix(producer): preserve plan compatibility and optional inspection

Keep reference metadata outside the v2 manifest hash and read it from the
verified execution-plan artifact. Static planning uses a non-gating page
inspection instead of requiring render-worker capabilities.

— Jerrai

* fix(producer): poll readiness independently of animation frames

Use timed polling while the render clock parks animation frames. Cover readiness
that changes after the first check with a short real-browser regression.

— Jerrai

* fix(producer): budget measured reference metadata runtime growth

Producer adds 2,228 compressed bytes over current main. Tests, fixtures and source
maps are already absent from its dist-only tarball. Allow 7,766 bytes of headroom
above the verified 837,234-byte payload while retaining the unpacked limit.

— Jerrai
2026-11-02 14:42:18 +00:00
Miguel Ángel 5a164fb369 feat(cli): render --start and --end render only that span of the film as its own MP4 (#6834)
* feat(cli): render --start and --end render only that span of the film as its own MP4

The span reuses the chunked render path, so frames are captured at their absolute times and sub-composition timing matches a full render.

* chore(producer): shorten the renderSpan comment

* fix(producer): a cancelled span render stops, and its real-render test runs in the integration lane

renderSpan checks the abort signal before each chunk part and before the stitch. The real-render tests move to their own file listed in the integration lane.

* chore(producer): put the renderSpan doc comment back above renderSpan
2026-10-30 14:45:43 +00:00
Miguel Ángel c2cde2fb62 perf(producer): the audio true-peak check seeks to each segment instead of decoding up to it (#6672)
* perf(producer): the audio true-peak check seeks to each segment instead of decoding up to it

Each parallel segment scan decoded the AAC from the start and trimmed after, so the last one decoded the whole file. It now seeks to a whole second one second before its segment and trims relative to it: the same peak, measured in about half the time.

* test(producer): the true-peak check's ffmpeg tests run in the integration lane
2026-10-28 17:48:36 +00:00
Miguel Ángel 9d9bdd23ba fix(producer): a taken file-server port fails the render, and the late grading test runs in its lane (#6561)
* fix(producer): a taken file-server port fails the render, and the late grading test runs in its lane

* test(producer): run the taken-port file-server test under Node, where listen errors are events

* test(producer): every *.integration.test.ts must sit in the integration lane

* fix(producer): drop the explanatory comment on the file-server error handler
2026-10-27 14:31:17 +00:00
Miguel Ángel c618724a5f fix(producer): a clip bound by its mount's variable values plays the bound file (#6501)
* test(producer): probe a variable-bound clip under a host with values

* fix(producer): probe a variable-bound clip its mount or defaults rebind

* style(producer): variable media fixtures in small steps

* test(producer): list the real-render variable mount test in the integration lane

* style(producer): keep probeStage's comment share at the base
2026-10-27 03:09:31 +00:00
Miguel Ángel 54d0af57eb feat(engine): render sets a keyframe interval and a peak bitrate cap (#6444)
* feat(engine): encoders cap peak bitrate and place keyframes on a set interval

* style(engine): shorten the rate-cap comment

* style(engine): drop the doc lines the comment ratchet flagged

* feat(producer): mp4 renders honour a keyframe interval and a peak bitrate cap on every encoder path

* style(producer): shorten the delivery encoder file headers

* style(producer): drop a comment line from the segment manifest

* style(producer): shorten the integration test header

* test: delivery encoder tests follow the ffprobe argv contract and run in the integration lane

* feat: the render request, server and Lambda plan carry the keyframe interval and peak bitrate cap

* fix(studio): the Studio render route passes the keyframe interval and bitrate cap to the encoder

* chore(studio-server): drop a comment the helper's name already says

* feat(cli): render and lambda render take --keyframe-interval, --max-bitrate and --buffer-size
2026-10-27 00:29:06 +00:00
Miguel Ángel 165744edc0 fix(producer): compile probes each unique media source once however many elements use it (#6441)
* fix(producer): compile probes each unique media source once however many elements use it

* test(producer): run the probe-count test in the integration lane
2026-10-26 23:28:57 +00:00
Miguel Ángel 9b339e37cb fix(ci): the producer integration test list is data, not part of the pinned selection logic (#6467) 2026-10-26 19:29:17 +00:00