* fix(cli): capture waits for a mid-read navigation to settle and reads the page again once
A site that redirects or reloads after load destroyed the execution context under a page read, and the capture failed with Execution context was destroyed. The capture page's evaluate now settles the new document and runs the read once more on that error only.
* fix(cli): the capture browser opens every page with reads that ride out a navigation
* fix(studio): keep the canvas outline off the scaled preview iframe
Co-authored-by: Ryan Heinl <ryan@siyglobal.com>
* fix(studio): keep NLEPreview under the file size limit
Co-authored-by: Ryan Heinl <ryan@siyglobal.com>
* fix(studio): bank the player's colour-literal baseline
Co-authored-by: Ryan Heinl <ryan@siyglobal.com>
---------
Co-authored-by: Ryan Heinl <ryan@siyglobal.com>
A first page of a fresh Chrome stalled past vitest's 10 s hook limit on a contended Windows runner and failed the first test of its file. The first page is now opened inside beforeAll, with the launch and first-page times logged, and the browser project's hooks get the 30 s the CLI's Chrome project uses.
* test(cli): Chrome-driving tests run in their own project after the rest
A Chrome launching beside hundreds of parallel test files was starved past Puppeteer's 30 s launch limit on a 4-core runner. The motion-signature launch also never passed the 120 s ceiling its comment names.
* test(cli): the process tests that start Chrome run in the chrome project too
* test(cli): name the Chrome process tests as one literal glob the reachability check can read
* fix(cli): a nearer copy of another version no longer hides the host's pinned onnxruntime-node
* fix(cli): load the pinned copy by the entry its exports name, and skip a broken stray manifest
* fix(cli): the pinned copy's entry must sit inside the pinned folder, whatever the folder is named
* fix(producer): a taken file-server port fails the render, and the late grading test runs in its lane
* test(producer): run the taken-port file-server test under Node, where listen errors are events
* test(producer): every *.integration.test.ts must sit in the integration lane
* fix(producer): drop the explanatory comment on the file-server error handler
* fix(studio-server): a history lock whose start cannot be recorded is given back
claim() took owner.pid and then wrote the start record; if that write threw, the error left owner.pid held by this process, so later opens waited on and then named their own pid as the busy owner. Creation and recording now release the file together.
* refactor(studio-server): drop the comment the ratchet counts against ownerLock.ts
* fix(cli): every managed browser closes within a second even if Chrome never exits
Commands called browser.close() directly, which waits for the Chrome process to exit without a limit. A headless shell that acknowledged Browser.close and then stayed alive left the CLI hanging after its work was done. The managed browser's close() is now the bounded close that kills a browser that has not exited.
* test(cli): browser stand-ins carry the close() a real browser has
Audio effects launched Chrome with its own two flags and no retry, so inside
an agent's macOS seatbelt Chrome died at startup with "Target closed" while
the CLI's own browser launch recovered. The sandbox launch policy now lives
in the engine; the engine's Chrome launch retries once in one process over a
pipe when the sandbox refuses it, and audio effects use the shared Chrome
flags in software GPU mode. The CLI imports the same policy from the engine.
* fix: phone videos with an undecodable first audio track check, preview and render
* fix(engine): a rate-lane clip bakes its ramp from the decodable audio track
* test: phone-clip tests end ffprobe options before the input
* fix(studio-server): an HDR clip previews and snapshots the way the SDR export renders it
Footage tagged HLG or PQ played raw in the preview, where the browser tone-maps it its
own way, while the SDR export tone-maps it with zscale and hable: the same clip came
out lighter and with different reds and blues. HDR video now takes the tone-mapped
preview copy (the filter the export uses), and a snapshot still of HDR footage runs
the same tone map. Without an ffmpeg that has zscale and tonemap the clip plays
natively, with a warning that names the missing library.
* fix(studio-server): an HDR clip is never playable for preview, whatever its codec
Only HDR H.264 and ProRes took the tone-mapped copy: an HDR HEVC, VP9 or AV1 clip kept
its codec's test type, so a browser that can decode it was judged able to play it and
the original played with the browser's own mapping. An HDR clip now has no test type, so
the swap always fires. The missing-library warning no longer names the file.
* test(cli): the HDR still test ends ffprobe's options before its input
The repo's ffprobe argv contract requires "--" immediately before the input path; the new
test passed the still's path without it.
* fix(studio-server): preview loads root-path media, images and CSS from the project, as render does
* fix(studio-server): preview writes root paths project-relative, the form Studio reads back
* test(studio): record each edit-accuracy shard's file writes and reloads when HF_WRITE_TRACE is set
* style(studio): format the write trace
* fix(core): hash the write trace with sha256
* style(studio): wrap the trace hash helper
* style(studio): format the trace hash helper
* fix(studio): turn the reload log on in the Studio page the trace watches
* fix(core): text a script splits into letters shows once and carries the variable's value
* fix(core): Studio's mounted and swapped scenes read bound text, and instance values load first
* test(core): the scoped variables table is emitted compact in head
check gave a scene 3 s to signal it was ready, then warned "checking the current page
state" and sampled whatever was on screen. Scenes that build procedural textures or
WebGL canvases routinely need longer, so a pass could miss late content with a warning
nobody could act on. The default wait is now 10 s (it ends the moment the page is
ready), the warning says the scene may still be building and to raise --timeout, and
check_report records render_ready_timed_out so the cases can be counted.
The start probe waited for the shell to exit after SIGTERM, so a shell that stalled under load blocked the whole process. Kill it outright at the timeout.
* fix(cli): a browser's orphaned helpers no longer keep a finished snapshot from exiting
The CDP pipe sockets stayed open after Chrome exited whenever a helper process outlived it, so the CLI never reached natural exit. Destroy them when the browser process exits.
* refactor(cli): name the pipe close so launch.ts carries no new comment
* fix(cli): a browser stand-in without stdio no longer throws from the exit listener
* fix(cli): close every pipe of an exited browser, not only the CDP pair
* fix(cli): closing the managed Chrome also ends the helper processes it leaves behind
The close waited a second for Chrome to exit and then killed only Chrome's own process.
Under load that second is often not enough, and the helpers (the GPU and renderer
processes, crashpad_handler) were reparented to init and kept running after a finished
run. The close now records the processes under Chrome before it starts, and ends any of
them still running (under the same command) once Chrome is gone.
* test(cli): the helper-reaping test polls for the helper's exit instead of waiting 200 ms
* fix(cli): the Chrome process listing is bounded and no longer runs at import
The ps call that records Chrome's helpers ran with no time limit before the
bounded browser close, so a stalled ps made the close unbounded. It now has a
2 s limit, and a timeout records no helpers.
execFile is resolved when ps runs, not when the module loads, so tests that
mock node:child_process without execFile import it again.
* fix(cli): audio --read starts music where its sound is sustained
A run of the bed is split where sound fills less than half of the surrounding
2 s, so a short tone and scattered clicks that bridge into the music no longer
pull its start earlier. Sparse stretches are left to effects.
* fix(cli): audio --read finds effects in each stem and levels them from the mix
A sound ends where the next one starts, so a run of kicks is not one long
riser. Effects are searched in the drums and in the bed outside music, each on
its own, so a click inside a tone is still found. Each effect's peak is read
from the decoded mix in dBFS, and the music reference is taken next to the
effect rather than under it, where its own leakage sits.
* fix(cli): audio --read measures the recording through each pause
Pauses carry the whole recording's level so the read can say what keeps
playing while the voice stops.
* feat(cli): audio --read prints peaks, what plays in pauses, voice vs music
Effect lines print the absolute peak and name the reference of the relative
figure; pause lines keep the pause kind and list the effects, music and
ambience under them; sentences over music print voice and music loudness and
which is louder. Read schema version 4.
* fix(cli): audio --read finds bed effects on the whole bed, not a blanked one
Blanking the bed wherever music or ambience played made every blanked
stretch that ended while sound was still audible look like a sound rising
out of silence. Fades and quiet bridges then printed as dings, hits and
whooshes. The bed is now searched whole, and each source carries the
spans it plays music or ambience in. A sound whose onset-to-peak overlaps
one of those spans belongs to it, so it is not an effect. The drums and
the bare mix carry no spans.
— Jerrai
---------
Co-authored-by: Jerrai <jerrai@heygen.com>
* fix(cli): beats given a media file points to hyperframes audio instead of a folder error
* fix(cli): beats names the folder for a composition file and syncs the skills manifest
* fix(cli): snapshot's auto end frame stays within 250 ms of a long composition's end
* test(cli): the end-frame test comment states the cap, not the history
* chore(cli): shorten the snapshot end-frame comment
The GPU probe's answer is kept for the whole process and the first caller's probe is the
one every later caller waits on. When that first caller cancelled it (a prelaunched
browser dropped, a stopping check), the probe died with "This operation was aborted",
and that cancellation was kept as the answer: every browser the process launched after
it ran in software mode, with a log line blaming the GPU probe. A cancelled probe is now
forgotten and the next caller probes again.
* fix(studio-server): preview resolves root-path module imports to the project
* test(studio-server): preview's own scripts make no module import; lint flags a broken import map
* fix(cli): audio --read reports noise beds as ambience, not music
A stretch of the non-voice stems counted as music whenever it was above
-55 dB, so room tone and engine rumble separated into "other" printed as
a music piece. A stretch is now music only with a beat, clear tonal chroma
or more than one leading instrument; otherwise it is ambience with its
level in dBFS, called quiet under -45 dBFS, and breaks lie only between
two runs of music. The header lists only stems that carry sound, with
their level, instead of the separator's six fixed names.
* refactor(cli): audio --read gate carries its meaning in names, not comments
* fix(cli): keep ambience out of downstream music measurements
* fix(cli): measure music beat evidence within each stretch
* perf(producer): a parallel chunk checks BeginFrame on its first worker, with no separate browser
* style(producer): format
* fix(producer): a chunk whose first worker dies before its check settles instead of hanging
* feat(lint): warn when a sub-composition's linked stylesheet names its root id
* chore(skills): regenerate the skills manifest
* fix(lint): the linked-stylesheet hint names fixes that lint clean
* fix(cli): a check or snapshot that times out says which step it was on
check's idle deadline named only the phase ("while checking samples") and snapshot's
CDP timeout named nothing. check now adds the sample, craft frame or overlap probe it
was on, and snapshot adds the seek or capture of the frame it was on, with its time.
* fix(cli): a snapshot timeout no longer tells the user to raise a setting they do not have
Puppeteer's protocol timeout message ends "Increase the 'protocolTimeout' setting in
launch/connect calls". snapshot has no such option, so the step it was on is now the
last thing the message says.
* feat(cli): check reports where its seek loop spends its time
check_report carried one seek_loop_ms, which lumps the layout grid, the craft pass
(up to 600 frames) and the overlap pass with its hold probes. It now also carries
grid_ms, craft_ms, overlap_ms and composition_s, so a slow check can be tied to a
pass. Nothing about what check does or prints changes.
* chore(cli): drop the pass-timings doc comment so the comment share does not rise
* fix(cli): a Chrome that fails to start says how it ended, and a slow start says so
A failed launch only reported "Protocol error (Target.setDiscoverTargets): Target closed". It now
runs the browser once more on its own with the same flags and reports its exit code (Windows
codes named: missing runtime, out of memory, security software), its last stderr lines, or that
it stayed up. The CLI and the engine's render launch both use it. A start slower than 5 s prints
"Chrome is still starting...", and a --timeout that looks like seconds says it is milliseconds.
* chore(cli): cut the Chrome launch diagnosis comments to the comment limit
* fix(cli): the Chrome startup check runs Chrome as puppeteer does and can be cancelled
The check started the browser with only the caller's flags, so a full Chrome ran headful and
was blamed for a missing X server. It now uses puppeteer's default arguments (headless
included). The check is stopped when the CLI is stopped, and the GPU probe, whose failure
falls back to software anyway, skips it.
* fix(cli): a Chrome launch error is never replaced by a failure to explain it
The startup diagnosis asks puppeteer for its default arguments before re-running
Chrome. If that call fails, its error used to replace the launch error the caller
needed. The launch error is now reported as it was. The core package size budget
rises to cover the new chromeStartup module (about 4.7 KB unpacked).
* refactor(engine): the Chrome startup diagnosis lives in the engine, not core
Both callers launch Chrome through the engine (the CLI already imports it), so the
engine owns the diagnosis. Core's package size budget is back to its old value.
* ci: a release PR runs a fast release check, not the heavy suites
* ci: keep the release check's header within the comment limit
* ci: shorten the release check's usage line
* ci: trim the release check's comments
* ci: the release check's classifier hands the manifest test to a helper
The file-change test fetches an asset and never reads the response, so the file stays
open and Windows fails the later folder move with EPERM (it failed a merge-queue run).
The helper now reads each body to its end.
* fix(studio-server): history lock retries a busy url write and releases on failure
* style(studio-server): wrap the fs mock
* style(studio-server): format the owner lock test
* fix(cli): check stops making video copies after 10 minutes, and --timeout takes units
The copy phase of check had no overall limit: a source that kept moving was never
stopped, and stdout stays silent the whole time. It now ends after 10 minutes with
an error naming the files still unfinished and the elapsed seconds; finished copies
are reused on the next run. The stderr progress lines are unchanged.
--timeout on check and snapshot is milliseconds, so "--timeout 45" waited 45 ms.
It now accepts 45s, 2m and 45000ms, and a bare number under 1000 warns on stderr
that it is milliseconds. Output on stdout is unchanged.
* chore(cli): cut the --timeout parser comment to the comment limit
* fix(cli): drop the 10 minute wall clock on check's video copies
A copy that keeps making progress must not be cut by a clock, and a re-run would
only start it over. The copy already ends when ffmpeg stops reporting progress
for 3 minutes (finished pieces are kept for the next run), so the phase is
bounded on no progress. The --timeout warning now names the value actually used
when check raises a small value to its 500 ms floor.
* fix(cli): take JSON flags from a file or stdin so PowerShell can pass them
* fix(cli): read BOM-prefixed and UTF-16 JSON from a file or stdin
* style(cli): format the JSON flag reader
* test(cli): feed the bytes PowerShell pipes to the JSON reader
* style(cli): shorten the JSON flag reader's comments
* style(cli): one line for the JSON flag reader's comment
* fix(core): retiming a parked scene in the preview takes effect without a reload
* fix(core): an edit that leaves a parked scene without a start or length in seconds reloads instead
* fix(core): a video after a cut starts early by its measured start delay, so it plays in sync
* test(player): playbench reports how far the picture after a cut runs behind the playhead
* fix(core): a looping video no longer skews the learned video start delay
* fix(core): the video start delay is learned in less code and capped at 100 ms under test
Co-Authored-By: Claude <noreply@anthropic.com>
Co-authored-by: Joel Gallardo <joel.gallardo@heygen.com>
Co-authored-by: heygengenesis[bot] <262951085+heygengenesis[bot]@users.noreply.github.com>
Miguel Ángel