Commit Graph
167 Commits
Author SHA1 Message Date
James RussoandClaude Opus 5.5 983e865ad7 fix(studio-server): thumbnail origin from the server, sandbox previews from other sites (#7492)
* fix(studio-server): thumbnail origin from the server, sandbox previews from other sites

The thumbnail route builds the headless browser's URL from the server's own
listening origin (a new optional `serverOrigin` on the adapter, wired in the CLI
preview server and the Vite dev host) instead of the request's Host header.
Hosts that report no origin fall back to a loopback Host only.

Preview responses (bundled, sub-composition and project files) opened from
another site carry `Content-Security-Policy: sandbox allow-scripts` and
`Vary: Sec-Fetch-Site`. Studio's same-origin iframe, browser automation and
non-browser clients are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(studio): build the thumbnail origin from a hostname bind name

With HYPERFRAMES_PREVIEW_HOST set to a hostname, the listening address is
the IP it resolved to, and the Host check accepts the bind name, not that
IP. The thumbnail browser then loaded a 403 page. Use the bind name when it
is a hostname; IP and wildcard binds keep the listening address.

— Rames Jusso

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* style(studio): drop the serverOrigin comment that put it over the package's comment share

The hostname-bind rule is stated by its test name in serverOrigin.test.ts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 14:30:10 +00:00
Miguel Ángel 5c57999756 fix(producer): a render uses the CLI's own GSAP, so the default CDN's file needs no network (#7388)
* fix(producer): a render uses the CLI's own GSAP, so the default CDN's file needs no network

* fix(cli): the GSAP vendor lookup runs as ESM from source, so render starts again

* chore(producer): raise the unpacked size budget by the bundled-script module's 3 KB
2026-11-10 13:57:59 +00:00
f318d3d08a fix(studio-server): refuse cross-origin writes and unknown hosts on the preview server (#7490)
* fix(studio-server): reject cross-origin state-changing requests

Non-GET routes in createStudioApi answer 403 unless the shared
sameOriginPost predicate (lifted into studio-server's ./request-identity
subpath) accepts the request: the Host must be a server identity, a
present Sec-Fetch-Site must be same-origin, and a present Origin must
match the effective host and scheme. Hosts behind Codespaces or tunnels
allow their public name with HYPERFRAMES_PREVIEW_ALLOWED_HOSTS, read by
`hyperframes preview` and the Studio dev server.

Squashed from #6128 (42574a7, 110a300, 89011e1, 41c6626, 27193bb) onto
current main.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): the preview server answers only the hosts it is reached by

Every route of `hyperframes preview` (the forwarded studio API, the SSE
stream, /__hyperframes_config and the Studio page) now answers only
loopback names, the HYPERFRAMES_PREVIEW_HOST bind, or a host listed in
HYPERFRAMES_PREVIEW_ALLOWED_HOSTS, the same list the write guard uses.
Only the Host header counts here, since a page can set X-Forwarded-Host
on its own requests and a read carries no Origin to compare it with.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Dextheking1 <Dextheking1@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 10:14:23 +00:00
Miguel Ángel 4b3f70fb1b fix(cli): Studio renders take the same one-render-slot lock as the CLI (#7459)
* fix(cli): Studio renders take the same one-render-slot lock as the CLI

* fix(cli): a Studio render stops saying it waits once it has the slot
2026-11-09 21:18:29 +00:00
WaterrrForeverandClaude Opus 5.5 318724f5f4 feat(studio): show the agent's storyboard in a Storyboard tab beside the preview (#7284)
* feat(studio): show the agent's storyboard in a Storyboard tab beside the preview

The board an agent writes per the storyboard recipe (boards/storyboard.html,
or a root storyboard.html) now shows in Studio the way HyperFrames Desktop
shows it: a Preview | Storyboard strip over the preview panel, only while the
project has a board. Studio reads the page's class="frame" boxes into a board
of stills, with acts, titles, times and words, and one frame at a time with
arrow keys. A page with no frames shows as written in a script-less iframe.

A board written while Studio is open brings its tab to the front, as Desktop
does at the agent's stop. A rewrite of the page, a still beside it or
STORYBOARD.md reloads it in place, and a dot marks a rewrite seen from the
preview. "Show in preview" goes back to the film at the frame's start.

Notes, drawings and the go belong to Desktop's agent, so the board's bar
carries the desktop-app button. Its funnel events now say which button was
pressed (placement: header or storyboard).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HebQXPiLcYKQfvPWB3Fgxy

* refactor(studio): split the storyboard view and its frame reader into smaller parts

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HebQXPiLcYKQfvPWB3Fgxy

* docs(skills): the agent's storyboard stop points at the Storyboard tab, not the file

With the board shown beside the preview in Studio as in Desktop, the recipe's
stop and style-sampling's stop 1 tell the person to look in the Storyboard
tab, and to start a preview and give its link when none is running, instead
of handing over boards/storyboard.html to open from disk.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HebQXPiLcYKQfvPWB3Fgxy

* fix(studio): the storyboard listens on Studio's own file-change channel, and its notes are trimmed

The board opened its own /api/events stream, which the Vite dev server
behind the runtime smoke does not serve. It now subscribes through
subscribeFileChanges, the one channel picker the external-change
coordinator already uses (test adapter, Vite HMR, then SSE), so dev and
built Studio deliver the same changes to both.

The new files' comments are cut to the package's share, and the recipe's
Storyboard-tab line moves to the paragraph that names the board, leaving
the stop step as it was.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HebQXPiLcYKQfvPWB3Fgxy

* fix(studio): the board hears file changes through the coordinator, not a second subscription

The external-change coordinator stays the one subscriber to the file-change
transport (HMR in dev, SSE when built), as externalFileChangeOwnership
asserts. It announces each decoded change through fileChangeFanout, and the
storyboard listens there. Mounting EditorShell alone, as its tests do, no
longer opens an EventSource, and the coordinator file stays under the line cap.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HebQXPiLcYKQfvPWB3Fgxy

* feat(studio): the storyboard's Open in desktop app asks the app to open on the board, and its card says why

- The storyboard bar's button posts `doc: "storyboard"` with its page id. The preview server passes only that value
  on, and `openInDesktop` writes it into `.hyperframes/desktop-cta.json` beside the page id, so the app can open the
  project on its Storyboard tab with Build in sight (hyperframes-internal reads it).
- The guide card opened from the storyboard says "Approve this storyboard in the desktop app" and "Comment on a frame,
  draw on it, then press Build", and its last step says the app opens on this storyboard. The header's card is
  unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HebQXPiLcYKQfvPWB3Fgxy

* feat(studio): approve the storyboard in Studio; comments on frames stay in the desktop app

A Studio user without the desktop app had no way to approve the board from the tab, and the bar said approval was
in the desktop app, so the tab read as a dead end. Studio talks to the person's own agent through their chat, so the
bar's Approve copies "The storyboard is approved. Build the video from it." for them to paste to it, and says so in
a toast (or spells the words out when the clipboard refuses). Commenting and drawing on frames stay in the desktop
app. The storyboard recipe tells the agent those pasted words are the person's go.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HebQXPiLcYKQfvPWB3Fgxy

* fix(studio): the storyboard's desktop card offers commenting, since approving now happens in Studio

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HebQXPiLcYKQfvPWB3Fgxy

* fix(studio): hand-off intent before dispatch, steady film under the board, stills outside the board folder

- openInDesktop writes desktop-cta.json before sending the folder, so a running
  app reads the storyboard ask on arrival; a plain or header open drops an
  earlier storyboard ask; a failed open puts the earlier record back.
- PreviewStage keeps the film at one place in the tree with or without a board,
  so a board appearing never remounts it; the automatic switch goes through the
  same pause as a click, and a play while the board is up is paused.
- The board reloads when a still it draws changes, including a root board's
  stills/ and a boards/ page's ../assets.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HebQXPiLcYKQfvPWB3Fgxy

* chore(cli): fit the Storyboard tab in the CLI's size budget; reword a record helper's doc

The CLI tarball carries Studio's build, which now holds the Storyboard tab; merged
with main it measures 7,982,002 bytes packed, 7 bytes past the 1% tolerance.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HebQXPiLcYKQfvPWB3Fgxy

* fix(studio): hold the player while the storyboard covers the film

A pause after the fact let J's reverse loop schedule its next frame, so the
hidden film kept seeking. The stage now takes the player's own hold while the
board is up (and only when no one else holds it), so J, Space and playback
requests are refused before they start; Preview releases it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HebQXPiLcYKQfvPWB3Fgxy

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-06 16:16:21 +00:00
Vance IngallsandClaude Sonnet 5.5 a874a6324a feat(core): motion blur reports what a composition holds, as counts (#7306)
* feat(core): motion blur reports what a composition holds, as counts

The runtime scans a composition once per blur scan, on both tiers, and reports
counts of what it holds (canvases, video, frames, custom elements, clips, masks,
scroll containers, 3D, blend modes, and movers that overflow, sit under other
content, hold fixed children or carry pseudo-elements outside their box), plus
whether pose reads need callbacks. Counts only: no ids, classes, text or URLs.

The engine puts the non-zero counts on its [motion-blur] line and hands the
parsed report to the perf summary; the producer aggregates workers (first report
wins, failed frames sum) and the CLI sends motion_blur_* properties on
render_complete, from the CLI and from Studio renders.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* fix(cli): disclose blur counts in telemetry docs, raise inspector budget

The runtime fingerprint code is bundled into @hyperframes/inspector, which
puts its unpacked size 2.2 KB past the 1% tolerance. The telemetry docs now
list the composition counts the CLI sends with a blur render.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-06 15:03:34 +00:00
Miguel Ángel 72326a3ac7 fix(cli): a render's lint runs at normal priority, so a busy Windows PC no longer stalls it (#7268) 2026-11-05 23:09:58 +00:00
WaterrrForeverandClaude Opus 5.5 fb738015a0 fix(cli): bug-bash fixes for pull, offline, preview, check, cloud aspect, sfx search, and media-use avatars (#7170)
* fix(cli): an interrupted templates pull leaves no partial folder

Unpacking now runs tar asynchronously and removes its .part folder on
SIGINT/SIGTERM/SIGHUP before re-raising the signal. Part folders carry the
owning pid, and the next pull clears any whose process is gone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): auth status and templates pull say when HeyGen cannot be reached

Offline, both commands waited on unbounded requests and then printed only
undici's 'fetch failed'. A new networkFailure helper names the host, the
reason (DNS lookup, no route, refused, no answer in time, dropped) and the
next step. The account and token-refresh requests now time out after 15 s,
the template link after 15 s, and auth status reports an offline refresh at
once instead of retrying with the stale token. describeCauseChain moves into
the helper so the registry and auth share it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): preview leaves the project's HTML files as they are

Opening a project in preview stamped data-hf-id into every composition on
disk. The preview route and every source mutation already mint the same
content-keyed ids in memory, so the startup pass is dropped: files gain ids
only when an edit to them is saved. The .hyperframes folder is still made
before the watcher starts, so the preview cache creating it is not reported
to Studio as a manifest change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): check runs the browser audits past a lint error

A lint error made check skip runtime, layout, motion and contrast, so one
known lint error hid every browser finding. The browser pass now runs
whenever there is a composition to load, and the lint error still fails the
check. Only a root with no data-composition-id skips it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): no desktop-app line for CI or a script reading render output

The 'Keep editing by chatting with Framey' line printed on every render and
preview, including CI and piped runs where nobody can open the app. It now
prints for a person at a terminal, and for a coding agent, which the
hyperframes skill tells to pass the line on; CI and other non-TTY runs get
nothing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): cloud render takes a composition at any aspect ratio

A 1920x960 composition got 'server will default aspect_ratio to 16:9'
although the render kept 1920x960: at 1080p the cloud renders at the
composition's own size and aspect_ratio only picks a 4K preset. The CLI now
names the detected ratio (2:1) and says the size is kept, takes
--aspect-ratio as any W:H checked against the composition, sends only the
16:9, 9:16 and 1:1 the API accepts, and refuses a 4K render of any other
ratio before upload, where no preset fits.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(media-use): a weak sound-effect match says so instead of passing silently

resolve --type sfx returned a HeyGen sound at any score down to 0.4, and a
project file that shared one word of its name with the intent, with nothing
to tell them from a real match. Such a result now carries a match object in
the JSON ({score, min_score, low_confidence} or the matched words and the
intent the file was resolved for) and a low-confidence line on stderr. A
HeyGen search with no hit says so with the min score it used, and a sound
effect nothing matches fails with 'no sound effect matched'.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* feat(cli): media-use avatars lists the film account's avatar looks

Templates had to reach for 'heygen avatar list', a separate sign-in that can
be another account. 'media-use avatars' lists the private looks on the
HyperFrames account making the film (GET /v3/avatars/looks?ownership=private,
following next_token up to --limit) as {avatars: [{avatar_id, name, ...}]},
the id that 'generate --type avatar --avatar' takes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* chore(skills): leave style-sampling's avatar line to #7164, which owns that skill

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): templates pull removes only the part folders it marked as its own

The abandoned-part cleanup deleted any sibling named '<slug>.part-*' whose
next token was not a live pid, so a person's own 'sample.part-notes/',
'sample.part-reference.txt' or a symlink went with it. A pull now writes an
ownership marker (owner tag + pid) into its part folder, and the cleanup
removes only a real directory with the generated '<slug>.part-<pid>-XXXXXX'
name whose marker names a dead pid. Files, symlinks, unmarked folders and
older unmarked parts are left alone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): media-use avatars says it is offline when the login refresh cannot reach HeyGen

A network failure while refreshing the stored login was reported as 'no
HeyGen sign-in' with 'auth login' as the fix, though the login was still
there. It now keeps the network failure's message and next step.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(media-use): a reused weak sound keeps its low-confidence advisory

The first resolve of a weak HeyGen sound or a name-matched project file
flagged it, but an identical second resolve hit the project manifest and
returned it with no match object. The advisory is now rebuilt from the
record's provenance (the stored score, or the adopted file's name) on reuse.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* refactor(cli): keep the comment share of files this branch touched from rising

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): no check-then-use on pull markers, and the download is never written to disk

CodeQL flagged the downloaded bundle written to a file before tar read it,
and a stat-then-read in the preview test. The verified archive now streams
into tar's stdin, so no network bytes reach a file the CLI writes. The
abandoned-part scan takes the entry type from readdir instead of an lstat,
reads the ownership marker through one O_NOFOLLOW descriptor it fstats, and
the preview test reads each file once instead of stat-checking it first.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* chore(ci): raise the CLI's unpacked size budget to 5% over its measured size

main's @hyperframes/cli was already about 0.99% over its 23722874-byte
unpacked budget, so this branch's additions (networkFailure, the avatars
command, the larger skill references) tip it past the 1% tolerance. This is
the same value #7169 sets, 25159107 bytes (5% headroom over the measured
size), so the two PRs merge cleanly.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* refactor(cli): split the pull-marker check and share the token-endpoint POST

Fallow flagged pullOwner (CRAP 49.5, cyclomatic 13) and a 28-line clone
between refreshOnce and exchangeCodeForTokens. pullOwner is now the name
match, the O_NOFOLLOW marker read and the marker check as three small
functions, with the same behaviour. Both token requests go through one
postToTokenEndpoint, which keeps the 15 s timeout and the named network
failure.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): a 4k cloud render checks the exact size against its preset before upload

The aspect detector matches a ratio within ±0.05, so at 4k a 1920x1055
composition was sent as 16:9 and 1000x980 as 1:1, and the producer then
refused both as an aspect mismatch. At 4k the matched ratio's preset
(landscape-4k, portrait-4k, square-4k, the ones the API maps it to) now goes
through the producer's own checkOutputResolutionCompatibility, and a
composition it does not fit is refused locally with the producer's reason
and the 1080p alternative. 1080p, where the render keeps the composition's
own size, is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 18:21:36 +00:00
Miguel Ángel 4da50e2218 feat(telemetry): render_complete splits capture time into seek, page, screenshot and encoder wait (#6839) 2026-10-30 14:55:06 +00:00
Miguel Ángel 88d8e5b490 fix(cli): check and snapshot load GSAP from the bundled copy, not jsDelivr (#6824)
* fix(cli): check and snapshot load GSAP from the bundled copy, not jsDelivr

* test(cli): bundled GSAP loads on a page whose own requests interception answers
2026-10-30 12:54:06 +00:00
Miguel Ángel 3e795ece0f fix(cli): preview stops at once on Ctrl+C after Studio was open (#6782)
* fix(cli): preview stops at once on Ctrl+C while a Studio tab is open

* fix(cli): a closed Studio tab leaves no timer that holds a stopping preview open

* fix(cli): name the tab-closed wait instead of commenting it

* test(cli): the tab-disconnect test checks the route's own keep-alive timer, not every timer
2026-10-30 05:58:35 +00:00
Ular Kimsanov 6ae7c7688c docs: links point at hyperframes.studio, the app's new home (#6585)
* docs: links point at hyperframes.studio, the app's new home

* docs: the registry guide publishes to hyperframes.studio

* chore: format README table, regenerate the skills manifest

* docs: leave the browser editor's card wording for its own change
2026-10-27 20:08:22 +00:00
Miguel Ángel c9377e28ff test(cli): the studio server test reads the asset body it fetches before moving the folder (#6528)
The file-change test fetches an asset and never reads the response, so the file stays
open and Windows fails the later folder move with EPERM (it failed a merge-queue run).
The helper now reads each body to its end.
2026-10-27 07:28:55 +00:00
Miguel Ángel c21a70915f fix(cli): a preview inside a host app's run no longer takes the project's history (#6493) 2026-10-27 00:33:12 +00:00
Miguel Ángel 54d0af57eb feat(engine): render sets a keyframe interval and a peak bitrate cap (#6444)
* feat(engine): encoders cap peak bitrate and place keyframes on a set interval

* style(engine): shorten the rate-cap comment

* style(engine): drop the doc lines the comment ratchet flagged

* feat(producer): mp4 renders honour a keyframe interval and a peak bitrate cap on every encoder path

* style(producer): shorten the delivery encoder file headers

* style(producer): drop a comment line from the segment manifest

* style(producer): shorten the integration test header

* test: delivery encoder tests follow the ffprobe argv contract and run in the integration lane

* feat: the render request, server and Lambda plan carry the keyframe interval and peak bitrate cap

* fix(studio): the Studio render route passes the keyframe interval and bitrate cap to the encoder

* chore(studio-server): drop a comment the helper's name already says

* feat(cli): render and lambda render take --keyframe-interval, --max-bitrate and --buffer-size
2026-10-27 00:29:06 +00:00
Ular Kimsanov bab9ed58ad chore(cli): tag the studio download link with where it was shown (#6471)
* chore(cli): tag the studio download link with where it was shown

The terminal hint, hyperframes open and the browser editor button now add
src=cli or src=browser-editor to the download link. The download route
already records src, so these downloads stop landing in no source.

* chore(cli): drop the DownloadSource doc comment the type name already says

* chore(cli): leave the no-build fallback link untagged, since only the download route reads src
2026-10-26 21:39:35 +00:00
Miguel Ángel ad4d3fad13 fix(producer): convert HEIC images to JPEG at compile time (#6455)
* fix(producer): convert HEIC images to JPEG at compile time

Tiled HEIC photos probe as several video streams, so the media-type
preflight rejected them as image:video, and Chrome cannot decode HEIC.
Sniff the ftyp brands of every <img>, join and rotate the tile grid with
ffmpeg, verify the declared size, and swap in a cached JPEG.

* fix(producer): shorten the HEIC prep comments

* fix(producer): name host tool failures and keep a failed HEIC preview image as authored

Also: HEIC tests run in the integration lane; the primary grid is picked by default disposition.

* chore(producer): raise the package size budget for the HEIC prep
2026-10-26 13:56:13 -04:00
Miguel Ángelandlorenzozanee 37543d223a fix(cli): hide the Windows console for the port lookup and clipboard (#6449)
Co-authored-by: lorenzozanee <lorenzozanee@users.noreply.github.com>
2026-10-26 17:25:01 +00:00
Miguel Ángel b76b529372 feat(cli): offer the HyperFrames app download on Windows
The CLI and Studio now point Windows to the app download.

Studio names the Windows download in its install steps.
2026-10-26 12:23:42 -04:00
SophiaHuangCc 2d695a8436 feat(studio): support GIF export with loop count (#5593)
* feat(studio): support GIF export with loop count

* fix(studio): cap GIF exports at 30 fps

* fix(studio): complete GIF export review follow-ups
2026-10-26 14:57:55 +00:00
James RussoandClaude Opus 5.5 7f19f2335a feat(studio): load GSAP from the CLI's bundled copy by default (#6256)
* feat(studio): load GSAP from the CLI's bundled copy by default

Studio preview now loads the GSAP, CustomEase and MotionPathPlugin scripts
it adds from files the CLI ships and serves same-origin at /api/vendor/npm,
instead of jsDelivr. HYPERFRAMES_GSAP_BASE_URL still wins when set, and a
composition on another GSAP version gets its plugin from jsDelivr.

Renders now honor HYPERFRAMES_GSAP_BASE_URL when they replace a missing
local GSAP script, and the setting accepts plain http only for loopback
hosts.

Closes #6205

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* refactor(studio): keep comment share flat for the GSAP local root

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* fix(cli): find the installed gsap with node resolution when run from source

The Windows CI lane installs with the hoisted linker, so gsap is not under
packages/core/node_modules there.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* fix(producer): load a nested composition's missing GSAP from the mirror

A sub-composition's missing local gsap/dist script was hoisted into the
render unchanged, so HYPERFRAMES_GSAP_BASE_URL (and the jsDelivr fallback)
only reached the entry document. Run the same rewrite on every
sub-composition before it is compiled, resolving its path the way the
inliner will hoist it.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-25 03:08:42 +00:00
Vance IngallsandClaude Sonnet 5.5 1f8ead7bde feat(producer,studio): wire capture motion blur into renders and Studio (#5969)
Carry the runtime's blur through the render pipeline and the Studio render
panel.

- engine: installPageMotionBlur sets the page-side off switch and the render's
  device scale before any author script runs; CaptureOptions.pageMotionBlur
  lets a caller stand the page blur down.
- producer: a composition that asks for data-motion-blur on the root the
  runtime would pick forces screenshot capture, because html-in-canvas needs
  a real paint; the probe session carries the request's pageMotionBlur like
  every other session.
- studio-server and Studio: the render panel sends previewMotionBlur, the
  render route turns "off" into pageMotionBlur once, and the Studio dev server
  and the CLI server both receive the final value.
- mover scan: a large element that is see-through while it moves (a sweep, a
  light leak) is no mover, including a large image or canvas with alpha; the
  scan skips elements moved by a 3D individual transform property.
- cli snapshot injects video frames before the seek settles, matching the
  engine's order.

Folded review fixes: R1, R2, R3 (scan half), R7, R16, R18, T3 (render
adapters).

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 13:32:50 -07:00
Miguel Ángel 6d357ff0d8 fix(cli): check, snapshot and Studio read project text as UTF-8 (#5843)
* fix(cli): check, snapshot and Studio read project text as UTF-8

The preview servers sent HTML, CSS, JS and JSON with no charset, so Chrome
read a page without <meta charset> as windows-1252 and stills showed garbled
non-Latin text while the render, whose file server already sends utf-8,
was correct. The shared MIME table now carries charset=utf-8 for text types,
and the two hard-coded headers use it.

* fix(cli): snapshot shows accented text when the page's meta charset sits outside its head

A <meta charset> past Chrome's first 1024 bytes and outside <head> is ignored, so with no
charset in the header the page decoded as windows-1252. The browser test serves such a page
through the static server snapshot uses. play compares the media type without its charset,
so JSON assets keep their content-hash revalidation.
2026-10-20 13:52:43 +00:00
Miguel Ángel 5583ae4293 perf(cli): commands run without esbuild, puppeteer-core or sharp until they need them (#5930)
* perf(cli): commands run without esbuild, puppeteer-core or sharp until they need them

A host that bundles the CLI can now leave these packages out: each command
loads them only where it uses them, and sharp installs once on first use when
it is missing. The build check fails on any static import of them again.

* fix(cli): use a host's sharp from NODE_PATH and let hosts turn first-use installs off

* fix(cli): capture fails when sharp is missing, and one install serves every caller

A missing sharp now stops the asset download up front instead of counting every
image as unavailable. Concurrent first uses share one install, a failed install
is not retried in the same run, and preview thumbnails report why. Hosts can turn
off installs for a list of packages, e.g. HYPERFRAMES_NO_OPTIONAL_INSTALL=sharp.

* fix(cli): snapshot --describe still works without sharp, resizing only when it is installed

* style(cli): format the sharp loader and its tests

* build(cli): sharp is an optional dependency, so a host can ship the CLI without it

* build(studio-server): keep sharp out of the bundle now that it is optional
2026-10-20 09:12:47 +00:00
Miguel Ángel 93c321285c fix(studio): render scratch stays out of the project and error telemetry counts real failures only (#5902)
* fix(studio): a lost preview server or a superseded edit no longer files as a crash

* fix(studio-server): a render's scratch files no longer stream changes or list as compositions
2026-10-19 19:52:04 +00:00
Miguel Ángel 5975dd7579 feat(studio): the desktop-app button says Install the desktop app and never dead-ends (#5854)
* feat(studio): the header's desktop-app button says Install the desktop app and never dead-ends

The button now reads "Install the desktop app" beside Framey drawn as the app
draws it. Where the app is installed, a press opens this project in it; a
folder preview serves from a bare index.html gets its hyperframes.json first,
so the app no longer refuses it. Without the app, the button links straight to
hyperframes.dev's download, and a failed open lands there too. Platforms with
no build of the app show no button. Telemetry now records eligibility, one
impression, the click and the press outcome, with OS, app installed and
download available.

* feat(studio): the desktop-app button records eligibility, impression, click and outcome

* feat(studio): a desktop-app press carries its page id to the download and the app hand-off

* chore(studio): describe Framey's drawing without internal names

* feat(studio): the desktop-app button opens a guide that walks download, install and open

Without the app, the header button opens a card where Framey walks three steps: the
download opens in a new tab, the install is found by asking the preview server while the
card is open, and the project opens through the existing hand-off. A failed hand-off shows
the folder to copy and Try again. With the app ready the press opens the project directly.
Each step change is recorded through trackStudioEvent; a download is never counted as an
install.

* fix(studio): the desktop-app guide counts one install per page

The app removed and found again on the same page recorded install_detected twice; a page
latch keeps it to one, as the telemetry contract says.
2026-10-18 17:34:56 -04:00
Miguel Ángel cadd7af2b5 fix(studio-server): send Studio's history edits to the process that owns the project's history (#5826)
* fix(studio-server): send Studio's history edits to the process that owns the project's history

* fix(studio-server): a forwarded history call gives up after 5 s, so a stopped owner cannot hang
2026-10-18 06:07:33 +00:00
Miguel Ángel 0e9f380c2e feat(cli): render telemetry reports how busy the machine's CPU was (#5646)
* feat(cli): render telemetry reports how busy the machine's CPU was

render_complete and render_error now carry system-wide CPU busy share (average
and busiest 2 s window), cores busy in that window, and the one-minute load
average at start and end, for CLI and Studio renders. Nothing is sampled when
telemetry is off.

* test(cli): render tests use a private project folder instead of /tmp/project
2026-10-15 16:08:52 +00:00
James RussoandClaude Opus 5.5 ab8a4da53f feat(studio-server): accept crf, videoBitrate, videoFrameFormat and hdrMode on the render route (#5549)
* feat(studio-server): accept a crf override on the render route

The Studio render route only forwarded draft/standard/high, so a Studio or
desktop export could not ask for a specific CRF the way `hyperframes render
--crf` can. Film-grain finishing passes need CRF 12 to keep the grain.

The route now takes an optional integer `crf` (0-51 for mp4, 0-63 for webm),
rejects an out-of-range value with 400 instead of dropping it, ignores it for
mov, and both Studio adapters pass it to the render job.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* chore(studio-server): keep the crf change free of new comment lines

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* feat(studio-server): accept videoBitrate, videoFrameFormat and hdrMode on the render route

Same options `hyperframes render` already takes (--video-bitrate,
--video-frame-format, --sdr/--hdr), so Studio callers are not limited to
the quality presets. crf and videoBitrate are an either/or, matching the CLI;
an invalid value is a 400. Parsing moves to helpers/encoderOptions.ts.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-13 20:09:58 +00:00
Miguel Ángel 91f9c9eb04 feat(studio): export can encode on the GPU, like render --gpu (#5397)
* feat(studio): export can encode on the GPU, like render --gpu

* test(studio): the 4K export assertion carries the GPU flag

* refactor(studio): the GPU flag needs no comment beyond its name

* fix(studio-server): only MP4 exports encode on the GPU, and render errors report it

* fix(studio): the disabled GPU option dims like the other export controls
2026-10-10 04:45:05 +00:00
Miguel Ángel f85614ecb2 fix(cli): WebGPU compositions work in snapshot, check and layout like render (#5354)
* fix(cli): snapshot, check, layout and thumbnails honour software WebGPU like render

* test(cli): stub the local WebGPU helper in the studio server tests

* fix(engine): webgpu compositions are recognised after the bundled runtime script

* fix(engine): a hung GPU probe falls back to software in 15 s instead of 120 s

* fix(engine): the GPU probe keeps the configured launch timeout and bounds only its page

* build(parsers): declare the html-attribute-spans subpath in its descriptor

* build(gcp-cloud-run): the BeginFrame contract stage copies parsers, which the engine now imports

* test(cli): the screenshot launch pin follows the shared local WebGPU helper

* fix(engine): the GPU probe's wait for Chrome's first page falls inside its 15 s limit
2026-10-10 00:08:07 +00:00
Miguel Ángel 5ec2dd2e12 fix(lint): check passes valid sub-compositions and scene-relative asset paths (#5337)
* fix(lint): check passes valid sub-compositions and scene-relative asset paths

* fix(lint): keep the browser lint build free of node modules

* refactor(lint): tidy sub-composition lint helpers and guard bare node imports

* fix(lint): resolve stylesheet asset paths from the stylesheet's own folder

* fix(lint): catch every written form of a path that climbs out of the project

* fix(parsers): sub-composition asset paths written with backslashes load in preview

* fix(parsers): an encoded backslash stays in the file name and a leading backslash stays absolute

* fix(lint): an encoded %2f counts as a separator when checking for a climb out of the project
2026-10-09 19:54:58 +00:00
Miguel Ángel 621ddd4693 fix(studio): stop file names with %, apostrophes or $ from breaking Studio (#5156)
* fix(studio): serve files whose name has a bare percent sign

A browser sends src="100%.png" with the % unescaped, and decoding the whole path threw, so Studio answered 500. Only well-formed escapes are decoded now.

* fix(cli): serve files with a bare percent sign from the check and snapshot server

One shared decode rule for request paths; the image thumbnail route's malformed-escape 400 could no longer fire, so a name that is not a file is a 404.

* fix(cli): name a failed file with a bare percent sign in check

* fix(studio): keep apostrophes and dollar signs in file names when editing attributes

An attribute value is matched by its own quote kind, so src="it's.png" is replaced instead of duplicated, and every insert uses a function replacer, so $1 or $& in a file name is written as is.

* fix(studio): rename references spelled with %20 or &amp; and read quoted media sources

WIP: not yet tested; see the resume note.

* fix(studio): match whole attribute names when editing media sources

* fix(studio): compare decoded names and escape replacement references

* fix(studio): preserve file references across URL and string consumers

* docs: clarify raw file references and URL fields

* fix(studio): keep raw path identity distinct from URL spelling

* fix: share attribute grammar and decode media URLs at their readers

* fix: preserve local filename identity in HTML URL output

* fix: decode entity references before rename candidate matching

* style: format rename entity handling and regressions

* fix: preserve platform file identity when renaming references

* fix(core): decode CSS escapes before rebasing asset URLs

* fix(core): consume CSS continuations before URL encoding

* fix(core): preserve CSS URL identity and escape rebased suffixes

* fix(core): express CSS suffix controls with Unicode categories

* fix(core): preserve URL backslash identity while rebasing

* test(core): respect platform backslash filename semantics

* fix(studio): a dropped file with %, # or ? in its name loads, and an encoded reference renames

* fix(studio): read an authored src as a URL so dropped files with spaces, %, # or ? load

* fix(studio): media routes find files named with ? or #, and the probe reads a src as a URL

* fix(studio-server): one rule for request file paths, so loudness finds files named with %, # or ?

* chore: drop the design note from the change

* fix(core): rename replaced clips whose src is URL-encoded
2026-10-08 16:37:49 +00:00
Miguel Ángel dbb8222c8d fix(studio): catch up the preview after missed file changes (#5126)
* fix(studio): recover previews after missed file changes

* fix(studio): keep queued reloads with the current owner

* fix(studio): keep a queued outside change when switching compositions

* test(cli): the project watcher closes its parent folder's watch too

* fix(studio): keep the project-folder change out of the shared signature check

* fix(studio): keep the edited file's draft and reload every session after a reconnect

A reconnect or replaced folder is a project-wide change: every open SDK session reloads, a failed save is recorded against the file the draft belongs to, and two queued changes to different files merge into one project-wide reload.

* fix(studio): refresh the preview cache when the .hyperframes folder is replaced

* fix(cli): report the files of a folder moved into the project

Replacing a populated folder such as .hyperframes/ now reaches the signature cache through its files, so the shared signature rule stays as on main and Studio's own writes inside .hyperframes/ still invalidate nothing.

* refactor(studio): name the merged file-change payload and share the test sender

* fix(studio): keep a failed draft's recovery copy until that file itself saves

* style(studio): rewrap the merged payload line after the rename

* fix(studio): deliver a held change's full reload when its block clears

A clean save, Use external and Keep Studio now all deliver the merged scope a blocked change owes, and a moved-in .hyperframes folder reports its manifests so a dropped one still clears the cached signature.

* fix(studio): keep restored drafts out of the reload scope and clear the lint gates

* fix(studio): retain held reload scope before React renders
2026-10-07 07:32:16 +00:00
Miguel Ángel c6478e404c fix(studio): undo takes back the first edit of a film whose media is still being copied (#5043)
* fix(studio): undo takes back the first edit of a film whose media is still being copied

* fix(studio): the first undo of a film repaints the preview in place

* fix(studio): background media copies keep the media ledger and survive a history prune

* fix(studio): a busy project history never makes writes wait for its lock again

* refactor(studio): name the restore stamping instead of commenting it

* perf(studio): undo stamps only a restore side that has no stamps

* fix(studio): closing a project history finishes its media copy first

* fix(studio): media copies stay resumable until recorded and skip a replaced folder

* fix(studio): the history lock wait comes back after a successful open
2026-10-05 08:05:14 +00:00
Miguel Ángel b3d2b82fe9 feat(core): the renderer's font pipeline is importable from @hyperframes/core/fonts/embed (#5041)
* feat(core): the renderer's font pipeline is importable from @hyperframes/core/fonts/embed

* style(core): format the font pipeline and state the bundled-subset invariant

* test(producer): repin the test lane map after the font tests moved to core

* fix(core): images build fonts once, CLI bundles one pipeline, font tests pass on Windows

* test(core): font retry tests get a budget no slow machine can exhaust

* test(core): the Retry-After budget test fails when the budget is ignored
2026-10-05 04:54:53 +00:00
WaterrrForever 6a27a34f21 feat(cli,studio): hand off on macOS now, and open the app on Windows and Linux (#4999)
* feat(studio,cli): add an Edit with Framey button and `hyperframes open` for HyperFrames Studio

Point people from the CLI and the Studio preview to HyperFrames Studio, the desktop app.

- Studio header: an "Edit with Framey" button with Framey, the app's cursor mascot (the eye
  follows the pointer, a wiggle on hover, honours reduced motion). Until the app opens
  handed-over projects (HANDOFF_READY), a press shows a "Meet Framey" card with the download.
  The button shows only where the preview server answers GET /api/open-in-desktop on macOS,
  so the desktop app's own embedded Studio never shows it.
- `hyperframes open [dir]`: hands the project folder to the app with `open -b` (released app,
  then Canary) and points to the download when neither is installed. When run by Claude Code
  or Codex it leaves .hyperframes/agent-handoff.json (CLAUDE_CODE_SESSION_ID / CODEX_THREAD_ID)
  so the app's first chat can pick up that conversation.
- render and preview print one line about the app: the download until HANDOFF_READY, then
  `hyperframes open` when the app is installed. Nothing for a draft render, a batch row, or a
  run inside the app (HYPERFRAMES_DESKTOP_PROJECT).

* fix(studio,cli): gate `hyperframes open` too, guard the open-in-desktop POST, keep one gate

Review of #4951 at 58934a34.

- One gate: HANDOFF_READY lives only in the CLI. `GET /api/open-in-desktop` now says
  `handoff`, and Studio's button reads it, so the gate cannot be half-flipped.
- While gated nothing opens and nothing is written: `openInDesktop` returns
  `handoff-unavailable` (so `hyperframes open` prints the download line and the POST route
  answers with it), and no `.hyperframes/agent-handoff.json` can sit waiting for a later release.
- The POST answers only Studio's own same-origin request (loopback Host, matching Origin,
  Sec-Fetch-Site same-origin); a cross-site or rebound-host POST gets 403. Routes moved to
  server/desktopRoutes.ts with their own tests.
- `hyperframes open`: exits 1 when nothing opened, answers in JSON under --json for a bad
  directory, and tells a missing app from one macOS could not open (`open-failed`). A project
  that cannot be written still opens, with nothing handed over.
- Tests drive the live path through `ready`, are path-portable for Windows, and cover the draft
  and batch-row hint skips (`wantsDesktopHint`, `batchRowRenderOptions`).
- The load smoke mocks the route.

* feat(cli,studio): hand off on macos now, and open the app on windows and linux

The released Mac app (b254) takes a handed-over folder and its conversation, so
HANDOFF_READY turns on for macOS. Windows and Linux stay on the download until the
desktop change that reads a folder from the command line ships.

- `hyperframes open` finds the app off macOS: the per-user install on Windows, and
  on Linux the AppImage the app records in launcher.json; it starts it with the folder
- download links follow the machine: the DMG on macOS, the AppImage on Linux, and
  nothing on Windows, which has no public download yet
- the Studio button shows wherever there is a download or an installed app; the card
  no longer says "for macOS"
- every render prints the app line except batch rows: music-to-video delivers a draft
- the success line names the app that took the folder (Canary included)

* fix(studio): the edit-with-framey button asks its route through studioApiFetch

* fix(cli,studio): name the app the hyperframes desktop app, apart from the studio preview

* fix(cli,studio): fewer comment lines, so no file's comment share rises
2026-10-04 12:54:17 +00:00
WaterrrForever bd0dc8c3ae feat(studio,cli): add an Edit with Framey button and hyperframes open for HyperFrames Studio (#4951)
* feat(studio,cli): add an Edit with Framey button and `hyperframes open` for HyperFrames Studio

Point people from the CLI and the Studio preview to HyperFrames Studio, the desktop app.

- Studio header: an "Edit with Framey" button with Framey, the app's cursor mascot (the eye
  follows the pointer, a wiggle on hover, honours reduced motion). Until the app opens
  handed-over projects (HANDOFF_READY), a press shows a "Meet Framey" card with the download.
  The button shows only where the preview server answers GET /api/open-in-desktop on macOS,
  so the desktop app's own embedded Studio never shows it.
- `hyperframes open [dir]`: hands the project folder to the app with `open -b` (released app,
  then Canary) and points to the download when neither is installed. When run by Claude Code
  or Codex it leaves .hyperframes/agent-handoff.json (CLAUDE_CODE_SESSION_ID / CODEX_THREAD_ID)
  so the app's first chat can pick up that conversation.
- render and preview print one line about the app: the download until HANDOFF_READY, then
  `hyperframes open` when the app is installed. Nothing for a draft render, a batch row, or a
  run inside the app (HYPERFRAMES_DESKTOP_PROJECT).

* fix(studio,cli): gate `hyperframes open` too, guard the open-in-desktop POST, keep one gate

Review of #4951 at 58934a34.

- One gate: HANDOFF_READY lives only in the CLI. `GET /api/open-in-desktop` now says
  `handoff`, and Studio's button reads it, so the gate cannot be half-flipped.
- While gated nothing opens and nothing is written: `openInDesktop` returns
  `handoff-unavailable` (so `hyperframes open` prints the download line and the POST route
  answers with it), and no `.hyperframes/agent-handoff.json` can sit waiting for a later release.
- The POST answers only Studio's own same-origin request (loopback Host, matching Origin,
  Sec-Fetch-Site same-origin); a cross-site or rebound-host POST gets 403. Routes moved to
  server/desktopRoutes.ts with their own tests.
- `hyperframes open`: exits 1 when nothing opened, answers in JSON under --json for a bad
  directory, and tells a missing app from one macOS could not open (`open-failed`). A project
  that cannot be written still opens, with nothing handed over.
- Tests drive the live path through `ready`, are path-portable for Windows, and cover the draft
  and batch-row hint skips (`wantsDesktopHint`, `batchRowRenderOptions`).
- The load smoke mocks the route.

* fix(studio): the edit-with-framey button asks its route through studioApiFetch
2026-10-04 10:52:23 +00:00
Miguel Ángel ada4e0d289 fix(studio): show each timeline row its own layer instead of a flat bar (#4917)
* fix(studio): show each timeline row its own layer instead of a grey bar

A row got a frame only if it spanned under 92% of the film and its id did not
look like a backdrop; every other row drew a plain grey bar. Every element row
now gets its frame, and the capture fades the row element's siblings first, so
the frame shows that layer and not the whole film. Studio's dev server and the
CLI share one capture helper; Studio's own copy is gone.

* fix(studio): read timeline rows from any realm so each keeps its selector

* refactor(studio-server): always isolate the element in a thumbnail clip

* fix(cli): undo a thumbnail's isolation before its page takes the next capture

* chore(core): generate the dom-realm export and trim thumbnail clip comments

* fix(studio-server): restore sibling opacity after a clip, hash selectors in cache keys

* fix(studio-server): keep faded siblings in a page-owned list so restore is exact

* feat(studio): draw a text layer row as its own live text instead of a captured picture

* refactor(studio): move timeline text reading into its own module

* fix(studio): keep text rows readable and current, and leave painted layers as pictures

* fix(studio): refresh a canvas-edited text row by its own identity and source file

* fix(studio): refresh a canvas-edited text row known only by its data-hf-id
2026-10-03 00:22:49 +00:00
miga-heygenandMiguel Ángel fcc637068c fix(cli): honor an explicit --port for background preview reuse and launch (#3915)
* fix: honor explicit --port when reusing a background preview server

startBackgroundPreview never compared a reuse candidate's actual bound
port against the caller's explicitly requested --port before returning
it, so a second `preview --port <N>` call could silently return an
existing server on a different port instead of honoring the request.

Reuses the existing PreviewServerPortMismatchError (already used by
findPreviewServerForProject for the same discipline) instead of adding
a new error type: an explicit --port that doesn't match the reuse
candidate now throws a clear conflict rather than substituting the
wrong port silently. A bare launch with no --port keeps reusing any
project-matching server, unchanged.

Deliberately out of scope: the interactive/embedded launch path
(runEmbeddedMode -> findPortAndServe) has the same silent-substitution
shape when a same-project server is found mid-scan at a port other
than the one requested. That path's output isn't the JSON lifecycle
schema this bug was reported against, and fixing it would mean
touching the interactive dev-server bind/scan loop rather than a
simple pre-return check, so it's left as a follow-up candidate.

Co-Authored-By: Miguel Angel <miguel.sierra@heygen.com>

* fix: honor explicit --port on every background preview exit path

`startBackgroundPreview` already refused to reuse a same-project server on
the wrong port when --port was explicit, but the fresh-launch path still
trusted whatever port the detached child bound. The child scans upward from
--port and takes the first free port, so `--background --port N` with N busy
reported `{ type: "started", port: N+1 }` and recorded ownership of it.

- After the child comes up, compare its port with the explicit --port. On a
  mismatch, reap the wrapper, wait until the substitute stops answering, and
  throw `PreviewPortUnavailableError` (JSON code `preview-port-unavailable`).
  If the substitute never stops, fail loudly instead of reporting it.
- Share one `unmetPreferredPort` predicate between the reuse and launch
  paths, and one `awaitServerGone` wait between the reap path and
  `stopBackgroundPreview`.
- When several same-project servers are running, prefer the one on the
  explicit --port as the reuse candidate instead of the lowest port.
- Map launch failures to JSON codes in one place
  (`backgroundStartFailureCode`).

Tests: preferred port bound → reported as-is; preferred port taken → reaped
and rejected with both ports, no session record; substitute that keeps
serving → distinct error; bare launch keeps the next free port; explicit
port picks the matching sibling. Deleting the launch-path check, the
candidate ordering, or the post-kill wait each turns its test red.

Co-Authored-By: Miguel Ángel <miguel.sierra@heygen.com>

* fix(cli): reuse the same-project server on the explicit --port

`startBackgroundPreview` picked its reuse candidate before honouring
`--port`, so with an owned server on 3002 and an unmanaged same-project
server on 3003, `--port 3003` rejected with "No Studio preview server …
on port 3003. Matching server port: 3002" even though 3003 was running.

- A policy-matching same-project server already on the explicit port is
  now the reuse candidate, owned or not; the owned server stays
  authoritative otherwise, and an explicit GPU-policy change on the
  requested port still replaces it.
- `PreviewServerPortMismatchError` receives every policy-matching
  same-project server, so the ports it reports are the ones running.
- `policyMatchingServers` is the single owner of the same-project +
  GPU-policy predicate; `matchingServer` derives from it.
- `BackgroundPreviewResult` names the launch result union once;
  `PREVIEW_PORT_MISMATCH_CODE` replaces three literal error codes.

Tests: unmanaged sibling on the explicit port is reused without touching
the owned server; mismatch error lists every same-project port and no
foreign-project port; owned server on the explicit port is replaced on a
GPU-policy change. Each new check fails when its guard is removed.

Co-Authored-By: Miguel Ángel <miguel.sierra@heygen.com>

* refactor(cli): keep the --port honour comments short

* fix(cli): drop the scan binding stopBackgroundPreview no longer reads

* refactor(cli): keep comment share at base in the preview lifecycle files

* fix(cli): reuse a same-project server on an explicit --port beyond the scan window

* test(cli): pin the JSON codes for a background start that misses --port

* refactor(cli): probe an out-of-window --port in its own helper

---------

Co-authored-by: Miguel Angel <miguel.sierra@heygen.com>
2026-10-02 18:26:05 +00:00
Vance IngallsandClaude Opus 5.5 9244c47328 feat(studio): normalize loudness and duck under voice, with a limiter report (4/8) (#4816)
* feat(studio-server): share loudness measurement with an absolute target and video support

normalize-audio moves its measure/plan code into @hyperframes/studio-server/loudness,
gains an absolute mode (--lufs, default -16, clamped at +12 dB and -1.5 dBTP) and
accepts <video> clips with sound. Adds the @hyperframes/core/audible-video subpath.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* feat(studio-server): add a measure-only loudness normalize endpoint

POST /projects/:id/loudness/normalize measures a clip's played window (audio or
video) and answers the -16 LUFS data-volume plan; Studio writes the attribute.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* chore: register the loudness and audible-video subpaths in their descriptors

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* style: format the loudness and audible-video subpath descriptors

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* feat(studio): add Normalize loudness and Duck under voice to the clip menu

Normalize measures the clip on studio-server and writes data-volume as one undoable
edit; Duck toggles a carve against every overlapping voice (audio or video with
sound) at the default strength. Both live in clipMenuAudioItems with one hook-in.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* refactor(studio): tighten carveOutput docs to the package comment share

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* feat(producer): report how far the true-peak limiter lowered the export

The AAC true-peak pass now returns its attenuation; the render logs "Audio lowered
by X.X dB to stay under -1 dBTP" and sets RenderJob.audioLoweredDb, which Studio
servers carry in the complete SSE event and the /renders record. Also exports
useAudioMetersVisible from @hyperframes/studio for hosts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(studio-server): scan HTML start tags without a backtracking regex

The start-tag regex backtracked quadratically on '<' followed by many spaces
(CodeQL js/polynomial-redos). A linear character scan reads the same name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(studio): refuse to normalize a volume-automated clip and honour save outcomes

A volume lane owns the clip's gain in preview and render, so writing
data-volume changed nothing while the toast claimed success; Normalize now
refuses with a clear message. Normalize and Duck also check each quiet-save
outcome, stop at the first failed or refused write and report it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* chore(core): drop the duplicate audible-video subpath descriptor

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-02 03:51:34 +00:00
Miguel Ángel c72b735a8c fix: a save's temp file no longer reaches Studio as an outside change (#4857)
* fix: a save's temp file no longer reaches Studio as an outside change

* refactor: the project file walk and its tests carry no new duplication or complexity

* test(studio): the edit accuracy gate judges the two nudge sequences again
2026-10-01 11:48:00 -07:00
Miguel Ángel 567525a8c2 fix: readers never see an empty or half-written project file (#4777)
* fix: readers never see an empty or half-written project file

* test: pin the create routes and block install to whole-file writes

* fix(sdk): a write through a link to a missing file creates that file

* fix: saves through a linked folder reach the real file, atomic writes handle long names

* test(sdk): check for the stray file, not the folder listing

* fix(core): creates work on Windows FAT drives, and links through folders resolve as the system does

* fix: agree the helper move in the deletion check, and match temp paths without a path regex

* test: check POSIX file modes only off Windows
2026-09-30 19:17:59 +00:00
Miguel Ángel 9e1dbca7a2 fix(studio): undo and redo update the preview in place instead of reloading it (#4718)
* fix(studio): undo and redo swap the restored scene in place instead of reloading

* fix(studio-server): a preview asked for right after an undo shows the undone state

* fix(studio): an undo that restores a page outside every scene still reloads in full

* fix(studio-server): a preview built across a write is not cached under the old signature

* test(studio): a soft undo keeps the scene hashes so the next edit still swaps
2026-09-29 02:03:56 +00:00
Miguel Ángel 26bfd38136 fix(studio-server): a save never recreates a project folder renamed away (#4602)
* fix(studio-server): a save never recreates a project folder renamed away

* style(cli): wrap imports after merging main

* fix(studio-server): proxy and upload answer that the project folder is gone instead of 502 or an empty 201

* test(studio-server): rename the project folder while an upload is being read

* fix(studio-server): a proxy or backup answers that a vanished project folder is gone

* test(studio-server): clean up the renamed folder after the proxy test

* refactor(studio-server): drop an unused re-export and share the folder-gone test setup

* fix(core): no folder outside a project is created once the project folder is gone

* test(studio-server): a refused render leaves no outside renders folder behind

* docs(core): wrap the mkdirWithinProject comment under the line limit

* test(studio-server): pass the project folder to the preview document store
2026-09-28 09:48:22 +00:00
Miguel Ángel 59e3850f6a fix(studio-server): a write through a link lands on the file the system resolves (#4589)
* fix(studio-server): a write through a link lands on the file the system resolves

* fix(cli): resolve catalog install paths as the system does, matching the install root

* fix(cli): list installed files relative to the real project folder
2026-09-27 12:30:17 +00:00
Miguel Ángel e00baefb5c fix(studio): reload the preview only when a file it loaded changes (#4570)
* fix(studio): reload the preview only when a file it loaded changes

* test(studio): read the owner id from the new change-owner shape

* refactor(studio): drop a comment the parser name already says

* fix(studio): keep reloading until the preview is built, and count what its document names

* style(studio): format the reference pattern and name the kept reload

* fix(studio-server): scan preview references in linear time and refresh all thumbnails on a merged reload

* fix(studio): keep a waiting film change when a file the preview never loaded arrives behind it

* test(studio): name the preview ownership test for what it checks

* chore(ci): allow the watchIgnore removals and trim the new comments

* fix(studio-server): reload the preview when a folder holding a file it loaded moves in or out

* perf(studio-server): check a changed folder in one lookup and cover every reference form

* fix(studio-server): record read folders for a project at the filesystem root

* fix(studio-server): reload the preview when the file a symlinked asset points at changes

* fix(studio-server): resolve symlinks on every preview read and key projects by their real folder

* fix(studio-server): record every link a preview read passes through, resolved as the system does
2026-09-27 10:05:53 +00:00
Miguel Ángel 4984a268f7 fix(cli): Studio's catalog install records the item and honours paths, as add does (#4573)
* fix(cli): Studio's catalog install goes through add, so it records the item and honours paths

* fix(cli): Studio's catalog lists the project's registry and install paths survive symlinks

* refactor(cli): name the Studio catalog's registry option plainly

* feat(cli): registry_item_added says whether add or Studio installed the item

* fix(cli): dropping the same catalog block in Studio twice installs it again

* chore(cli): drop a comment that restates add's source option

* fix(cli): Studio's re-record finds lock entries by their resolved path

* test(cli): the symlinked-folder install test checks the resize happened

* fix(cli): Studio mounts the installed item's own file by the path add recorded

* fix(cli): Studio's install never hands back a file the project kept for its own edit
2026-09-27 09:06:15 +00:00
James Russo 31c00d2f0e fix(studio): avoid preview reloads for temporary and excluded files (#4553)
* fix(studio): avoid preview reloads for temporary and excluded files

* docs: capture public preview reload reproduction

* fix(studio-server): normalize watch paths in linear time

* fix(studio): register dynamically opened preview projects
2026-09-27 02:23:25 +00:00
Miguel Ángel 7eb6430e4e fix(studio-server): history refuses once closed and reopens when a new project takes its folder (#4537) 2026-09-26 19:01:05 +00:00