Commit Graph
1752 Commits
Author SHA1 Message Date
Miguel Ángel 7801e3ff34 fix(cli): the check cache is written only as a project record, never through a link (#7884) 2026-11-16 00:51:21 +00:00
Michael Wang 4067efc454 fix: present refuses other sites' framing; Studio preview reads only its own frame's messages (#7877)
* fix(studio): the preview reads hf-preview messages only from its own frame

The preview message router acted on a message with no sender window, and on
any message that arrived before the preview frame existed. It now takes an
hf-preview message only when the preview frame exists, the message comes from
that frame's window, and its origin is one the frame can have: the page's own
origin, or "null" for a sealed frame. The element picker checks the same.

* fix(cli): present sandboxes deck pages another site loads and refuses framing by other sites

present now applies the same another-site decision as play to its
/composition/* route: a load by another site gets a sandbox CSP, its
validators are dropped, and the document is marked so its runtime offers
that site no editing port. Every present response also sends
frame-ancestors 'self' and X-Frame-Options SAMEORIGIN, so only the
presenter page itself can frame the deck. The route setup moves into
buildPresentApp so tests exercise the server as run() builds it.
2026-11-16 00:30:46 +00:00
Miguel Ángel ace8a78dcc fix(cli): preview --stop signals only a process the system says owns the port (#7882)
* fix(cli): preview --stop signals only a process the system says owns the port

* style(cli): format the preview stop tests
2026-11-16 00:29:53 +00:00
Miguel Ángel 5dc3b336aa fix(cli): no test fixture is shaped like a live HeyGen key, and CI refuses one (#7876)
* fix(cli): no test fixture is shaped like a live HeyGen key, and CI refuses one

* style(cli): format the key fixture and committed-key check
2026-11-16 00:21:21 +00:00
James RussoandClaude Opus 5.5 b856a1d63f fix(parsers): bound canvas scaffold dimension extraction (#7873)
* fix(parsers): bound canvas scaffold dimension extraction

* chore(parsers): raise packed size budget for linear scaffold scanners

The bounded scanners replace three regexes with a small amount of
procedural code; @hyperframes/parsers packs to 210414 bytes (+1.2%).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 00:00:41 +00:00
Michael Wang 0f23f40f8b fix(cli): catch-up lists only turns the app added after the hand-off (#7874)
* fix(cli): catch-up lists only history lines appended after the hand-off

The seen record now marks the history file (its identity and length) at
the hand-off, and catch-up and the end-of-command notice read only whole
lines appended past that mark. Lines a project already carried are never
shown, whatever dates they claim. After the app trims the history, the
place is found again by the digest of the last line shown; a history the
app set aside and restarted is read from its start; a history replaced or
cut short shows nothing until the next hand-off marks it again. Records
written before the mark keep the dated filter once, then switch to it.

* fix(cli): catch-up notes the history's lines at hand-off instead of a file position

The hand-off now stores short digests of every whole line the history
holds, and catch-up and the notice show lines not among them nor shown
before, in file order. The person's turns keep showing after the app
trims the history or a sync rewrites it, and lines a project came with
never show. A hand-off over an older seen record always notes the
lines; such a record shows dated turns only when all are dated after it.

* fix(cli): catch-up shows nothing for another project now at the same path

The hand-off also notes the project folder's identity (device, inode and
birth time). When a different folder sits at the path, the seen record
counts as no hand-off: catch-up and the notice say nothing, and the next
hand-off notes that project's lines afresh.
2026-11-15 23:54:43 +00:00
Miguel Ángel 56a2d0c53f fix(engine): a cached browser is used only when its files match the pinned build (#7865)
* fix(engine): a cached browser is used only when its files match the pinned build

* ci: install the pinned headless shell for the engine and producer test jobs

* ci: record the producer test job's new setup step for test reachability
2026-11-15 22:53:06 +00:00
James RussoandClaude Opus 5.5 e2430edecf fix(cli): one trusted PATH rule for the engine and CLI; say why a project copy was skipped (#7801)
* fix(cli): one trusted PATH rule for the engine and CLI; say why a project copy was skipped

The Windows PATH rules (quoted entries, the %SystemRoot% folders) now live in
the parsers' trustedPathDirs, so engine helper lookups and the CLI's PATH
rewrite apply the same rule.

When sam, aws, gcloud, docker, git or npx is not found but a copy sits in a
project folder the rule skipped, the message names that copy by its path
relative to the project and says why it was not used. cloudrun now reports a
missing gcloud or docker as not found instead of "exited with null".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* test(cli): join a simulated Windows PATH with the Windows separator

The shared trusted-folder rule now splits PATH on ';' whenever the platform
is win32, as Windows does. Two tests that pretend to be Windows on Linux
built PATH with ':', so the rule saw one folder instead of two.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): name skipped copies above the working folder; pin Windows PATH to the shared rule

The not-found hint now names any copy the trusted PATH rule skipped,
relative to the working folder, including ../node_modules/.bin when an
npm or pnpm script runs from a subfolder. A Windows test pins that quoted
PATH entries still go through the shared rule, so the project root's and
ancestors' node_modules/.bin stay skipped.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* chore(cli): trim projectCopyHint comments to the package's comment share

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 21:38:30 +00:00
Miguel Ángel 9bc2b231d3 fix(cli): cloud render sends one zip when it fits and uploads only the largest media (#7859)
* fix(cli): cloud render sends one zip when it fits and uploads only the largest media

* fix(cli): cloud render leaves unused media out only when the zip is over the limit

* test(cli): eight-at-once upload test waits for eight in flight, never a timer

* test(cli): eight-at-once upload test also fails when more than eight run
2026-11-15 21:19:22 +00:00
Michael Wang 52d43f33a3 fix(cli): upload archives never include credential or agent-state files (#7830)
* fix(cli): upload archives never include credential or agent-state files

Publish, cloud render and feedback stage the project through one path.
It now always leaves out package-manager and Git credentials (.npmrc,
.yarnrc, .pypirc, pip.conf, .netrc, .git-credentials, .gitconfig), key
files (id_rsa*, id_ed25519*, *.pem, *.key, *.p12, *.pfx), .ssh, .aws,
.gnupg, .docker, .kube, .azure, .config/gcloud and .config/gh, agent and
editor folders (.claude, .codex, .cursor, .agents, .gemini, .vscode,
.idea) and .mcp.json, at any depth and in any letter case. This holds
whatever .hyperframesignore says and whatever the HTML or CSS references.

A reference can bring back a file the ignore rules skipped only when it
is an image, video, audio, font, CSS or JS file, or when it is not in a
hidden folder. Every file left out this way is reported, and a file the
folder walk already reported is not reported again for each reference.

* fix(cli): anchor both alternatives of the key-file pattern

* fix(cli): a page's own scripts in a hidden folder still upload
2026-11-15 20:55:40 +00:00
Michael Wang 490199cef8 fix: static, producer and engine file servers check Host and mark runtime pages (#7852)
* fix(cli): the static project server answers only loopback and marks pages another site loads

check, snapshot, validate, layout, compare, grade-compare and motion-shot serve the
project from a loopback server. It now refuses any Host other than loopback or its
in-process name before reading a file. A page or file that another site loads comes
back sandboxed, and its documents carry the another-site mark, so the runtime offers
that site no editing port. The capture browser's own loads are unchanged.

* fix(producer): the render file server answers only loopback and offers no editing port

The render file server now refuses any Host other than loopback before it opens a
file; the capture browser asks for localhost. Every HTML page it serves carries the
another-site mark, so its runtime answers no editing connect. A render never sends
one, so capture is unchanged.

* fix(engine): the exported file server answers only its own host and offers no editing port

createFileServer from @hyperframes/engine now refuses any Host other than loopback or
the hostname it was bound to (on a wildcard bind, this machine's own addresses too)
before it reads a file. Every HTML page it serves carries the another-site mark, so
its runtime answers no editing connect.
2026-11-15 20:32:40 +00:00
Michael Wang c030e3193d fix(cli): publish and cloud render staging skip other computers' network shares (#7858)
* fix(cli): never open another computer's share while staging an upload

publish and cloud render now leave out a reference to another computer's
network share or a Windows device path before any file-system call on it,
and report it as left out with the network_share reason. A page that came
in with an imported project has its outside references left out before the
files they name are checked.

* test(cli): the Windows staging test's lstat mock honours throwIfNoEntry
2026-11-15 20:17:48 +00:00
Michael Wang fe21bee3cf fix(cli): subfolder renders read an ancestor's record however it is stored or spelled (#7847)
The received-files lookup above a rendered folder now treats a record path
that exists but is not a readable file (a folder, a dangling link, any
other kind of file) as an unreadable record, the same answer the folder's
own record gives. Only a missing record means nothing was received.

A listed file now counts as inside the rendered subfolder when one of its
parent folders is the same folder on disk, so naming the subfolder in
another letter case on a case-insensitive disk keeps its received files.
2026-11-15 19:19:11 +00:00
Michael Wang 7184b6694e fix(parsers): helper lookups skip the project above the working folder, not only the folder (#7854)
* fix(parsers): helper lookups skip the project above the working folder, not only the folder

* fix(parsers): compare a missing PATH folder by its nearest real parent, so Windows short names match
2026-11-15 19:12:04 +00:00
Michael Wang f891a30581 fix: answer only the loopback Host on the render and capture file servers (#7853)
The CLI static project server and the producer and engine file servers bind
127.0.0.1, but answered any Host header. They now refuse a request whose Host
is not 127.0.0.1, localhost or [::1] at their own port (or the in-process
origin the CLI hands out when listen is refused), and their responses carry
frame-ancestors 'self' and X-Frame-Options: SAMEORIGIN so another site cannot
frame the served page.
2026-11-15 18:09:10 +00:00
Michael Wang 70d60ce037 fix(cli): keep project text and other computers' shares out of render and upload notices (#7849)
The notice a render prints for a received project, and the left-out warnings and
outside-files list that publish, feedback and cloud render print, now show control
characters from references, file names and paths as visible escapes instead of
sending them to the terminal.

While it names the references a received project makes outside itself, the render
check no longer looks at a path on another computer's share or a Windows device
path. It names such a reference in the notice without reading it. A Windows device
prefix such as \\?\ is no longer cut short as if its ? started a query.
2026-11-15 18:00:18 +00:00
Michael Wang de1ce68988 fix(cli): a project .env key is used only when nothing is saved (#7848)
A HEYGEN_API_KEY or HYPERFRAMES_API_KEY that a project .env sets now comes
after every credential the person saved or exported. The CLI resolver, the
media environment and the media-use skill use it only when there is no saved
login, no saved API key and no key in the shell. When one is used, a single
stderr line names the .env file.

An expired, foreign-client, unreadable or refused login now raises the login
error instead of switching to a project .env key, whether or not the folder
has a received-files record. A key exported in the shell, or set by the app
that launched the CLI, keeps its current place, and the host gateway path is
unchanged.
2026-11-15 17:59:08 +00:00
Miguel Ángel 96cc8cb852 fix(parsers): helper programs never come from the project a subfolder sits in (#7845)
* fix(parsers): helper programs never come from the project a subfolder sits in

Run from a subfolder, the trusted PATH check skipped only folders inside the
working directory, so the project's own node_modules/.bin, which npm run puts
on PATH from every ancestor, still supplied helpers. The check now skips every
folder inside the outermost ancestor that marks a project (.git, package.json,
node_modules, hyperframes.json), below the home folder.

A CLI test also runs a real bare-name spawn of an executable planted in the
project folder: it runs under the raw PATH and is not found after the PATH trim.

* fix(parsers): keep the trusted lookup's comment share at main's level
2026-11-15 17:58:02 +00:00
Michael Wang 9701f0639c fix(cli): the audio caches never write or read through links in .hyperframes (#7825)
* fix(cli): the audio caches never write or read through links in .hyperframes

The read-audio cache, its stems, mix and descriptions, and the audio-kind cache
now use only real folders under the project's .hyperframes. A link or a file in
place of a cache folder stops the write with a clear message. Every cache file is
written to an exclusive temp file with a random name and renamed into place, so a
link at a temp or final name is replaced, never written through. ffmpeg writes the
voice-free mix into a private staging folder. Stem downloads use the new
downloadToFile replaceLink option. Cached files are read only when they are plain
files, and a stem list may only name files in its own folder.

* fix(cli): the kind cache reads no entry through a linked cache folder

readKindCache now checks that .hyperframes and audio-kind are real folders before
it reads an entry, as writeKindCache already does before it writes one.

* test(cli): read the replaced download before checking its type and mode

The replaceLink test now reads the file's bytes and lstat result once each, so
no read follows a check on the same path.
2026-11-15 17:31:16 +00:00
Michael Wang a2f9267089 fix: snapshot escapes composition text in its output; stills sweep the transcode cache (#7832)
* fix(cli): snapshot shows control characters in composition text as escapes

* fix(studio-server): making or serving a still sweeps the transcode cache
2026-11-15 17:10:12 +00:00
Michael Wang 962ddb7c54 fix: render, capture and bundling refuse the app's .hyperframes records (#7828)
Render, capture and the HTML bundler used a narrow private-file rule that
only refused Git data and env files. A composition's script could read the
app's own records under .hyperframes/ (chat history, hand-off, comments,
job log) from the file server, or a data-composition-src could inline one.

Every file server a composition reaches now uses the rule Studio, play and
present already use: Git, env, and .hyperframes/ apart from Studio's own
files and the prepared-assets and requests folders. The rule now matches
Windows spellings too: any case, trailing dots or spaces, backslashes and
stream suffixes.
2026-11-15 17:10:00 +00:00
Miguel Ángel 2ea78c0ab4 test(cli): the upload cut test stops failing on busy Windows runners (#7843)
* test(cli): the upload cut test stops failing on busy Windows runners

* test(cli): the upload cut test leaves room for a busy runner's slow first try
2026-11-15 14:12:04 +00:00
Michael Wang 2ceb682f92 fix: LAN-host previews and play pages refuse other sites without fetch metadata (#7836)
* fix(studio-server): previews with no fetch metadata on a LAN host count as another site

Browsers send no Sec-Fetch-Site header over plain HTTP to a non-loopback
name, such as a LAN address used with HYPERFRAMES_PREVIEW_HOST. The preview
guards now count such a request as the Studio's own page only when its
Referer names the same host. Otherwise the preview is marked and sandboxed,
its validators are dropped, and the thumbnail, waveform, peaks and
frame-token routes refuse it.

* fix(cli): play marks and sandboxes compositions another site loads

The play server's /composition/* route now applies the same another-site
decision as the Studio preview. A load from another site comes back with
the sandbox CSP and without validators, and its HTML carries the
hyperframes-preview-for-another-site mark, so the runtime offers that site
no editing port. The play page's own player is unchanged.

* fix(player): send a same-origin Referer from the composition frame

The player's composition iframe used no-referrer, so on a plain-HTTP LAN
host its own composition load carried neither Sec-Fetch-Site nor Referer
and the Studio and play servers sandboxed it as another site's load.
same-origin sends the host page's URL only to a composition on the same
origin, so another origin still learns nothing about the embedding page.
2026-11-15 12:34:43 +00:00
Michael Wang a7266e4c83 fix(cli): benchmark keeps received files' rule; a received .env key never replaces a login (#7837)
* fix(cli): benchmark applies the received-files rule for files outside the project

hyperframes benchmark now asks outsideAssetsAllowed() before it creates its
render jobs, the same check hyperframes render and the Studio render route
use. A project whose received-files record lists code files, or whose record
cannot be read, renders without files from outside the project.

* fix(cli): a received .env key never stands in for an expired login

A HeyGen key that a received project's .env set is now used only when no
login or API key is saved. When the saved login has expired, cannot refresh,
belongs to another OAuth client, or HeyGen refused its refresh, the CLI
resolver, afterRefreshFailure and the media-use skill's resolver raise the
login error instead of switching to that key. A person's own .env key and a
shell-exported key keep their current priority.

* fix(cli): a broken credentials file never gives way to a received .env key

A malformed or unreadable ~/.hyperframes/credentials now counts as a saved
credential when deciding whether a received project's .env key may be used.
The CLI resolver raises INVALID_STORE and the media-use skill says the file
can't be read. A person's own .env key keeps its current behaviour. The skill
now tells a person whose saved login belongs to another OAuth client to run
auth login rather than auth refresh.
2026-11-15 12:12:15 +00:00
Miguel Ángel 45cc331e54 fix(cli): cloud render no longer refuses a file only an unused page names (#7812)
* fix(cli): cloud render no longer refuses a file only an unused page names

The video's pages are walked from the staged upload, starting at index.html, with the
renderer's resolver; when a page it loads is not staged text, every page stays strict.

* fix(cli): cloud render --composition checks missing files from the page it renders
2026-11-15 12:11:56 +00:00
Michael Wang e426ce4eb4 feat(cli): uploads list every file they carry from outside the project (#7831)
* fix(cli): uploads leave out outside scripts; .ts counts as video only when it is one

* chore(studio-server): raise unpacked size budget for the upload file-type rule

* fix(studio-server): transport stream check never waits on a pipe and needs binary bytes

* feat(cli): uploads list every file they carry from outside the project
2026-11-15 10:31:13 +00:00
Michael Wang eaf33bc658 fix(cli): hyperframes audio never looks up media on another computer's share (#7826)
A film clip whose src resolves to a UNC or device path outside the
project's own share is now reported as "network share paths are not
analyzed". The clip is never stat'ed, probed, or decoded. Relative and
local absolute srcs resolve as before.
2026-11-15 10:15:05 +00:00
Michael Wang 04202e8a4c fix(cli): uploads leave out outside scripts; .ts counts as video only when it is one (#7818)
* fix(cli): uploads leave out outside scripts; .ts counts as video only when it is one

* chore(studio-server): raise unpacked size budget for the upload file-type rule

* fix(studio-server): transport stream check never waits on a pipe and needs binary bytes
2026-11-15 09:52:49 +00:00
Michael WangandClaude Opus 5.5 ac02474105 fix(cli): play and present check the Host like preview; local render leaves out outside files for a received composition (#7792)
* fix(cli): a subfolder of an imported project keeps its received-files record

Publish, cloud render and feedback now read the received-files record at
the nearest folder at or above the one they stage, so staging a subfolder
of an imported project still leaves out the outside files its received
files reference.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): a received file counts under any spelling of the same file on disk

The received-files lookup now also matches a project file that is the
same file on disk as a listed path, so a name respelled in letter case on
a case-insensitive disk keeps its received status.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): cloud render prepares only the GIFs staging kept

The entry GIF prep before a cloud render upload now reads only the staged
copies it is handed. An image whose source staging left out keeps its
reference as written and is never read from disk.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli,studio-server): never hand a playlist named as media to ffmpeg

A media file whose first bytes are an HLS playlist, an XML manifest or a
concat script now stays out of ffprobe and ffmpeg: cloud render leaves it
in the zip as authored, the media probe reports it as not media, and the
proxy copy refuses it. Real media never starts with these bytes, so it
probes and transcodes as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(studio-server): catch playlists with control bytes, and keep them from stills and audio probes

A text playlist or concat script is detected whatever bytes follow its
first line; only markup must be all text. A still frame and the audio
probe behind waveforms, peaks and loudness now refuse a file the probe
reads as not media, as the proxy copy already does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): a parent folder's state the CLI cannot read never marks a project received

The walk up for a received-files record now skips a parent whose record
cannot be reached. Only a record file that is there but cannot be read
or parsed counts every file as received.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): a drive that reports no file ids matches no received file by identity

Some network and virtual drives report a file id of 0 for every file, so
the same-file match now gives such a file no identity instead of
matching it to every listed file.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* refactor(studio-server): read a media file's first bytes with a read stream

The playlist check reads the first 64 bytes through a bounded read
stream instead of a raw file descriptor, and the audio-track probe's doc
comment sits on its function again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* chore(studio-server): raise the packed size budget for the media playlist check

Main packs @hyperframes/studio-server close to the 1% tolerance on the
168500 budget, and the playlist check adds about 320 bytes, which put
the Build over. Set the budget to 172000.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli,studio-server): open media only through self-contained media demuxers

Every ffprobe and ffmpeg input that cloud render offload, the publish
proxy bake and Studio's media helpers open now carries a demuxer
whitelist built from the supported media extensions: MP4/MOV/M4A/AVIF,
Matroska/WebM, MXF, AVI, MPEG-PS/TS, FLV, ASF, Ogg, WAV, MP3, AAC, FLAC,
AIFF and the still-image formats. Playlist, manifest and concat demuxers
can no longer open, whatever a file's bytes say. The proxy's own concat
step is left as it is.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli,studio-server): keep media probe argv flat, and expect the demuxer list in loudness args

Two probe argv literals built from nested spreads are flat again, so
"--" stays the visible second-to-last entry the argv contract checks.
The normalize-audio test expects the demuxer list before the input.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): play and present answer only local host names and allowed hosts

play and present listen on every interface. Each request now passes the
same Host check preview uses: localhost, loopback addresses and this
machine's own addresses and names are answered, and any other host name
gets a 403 naming HYPERFRAMES_PREVIEW_ALLOWED_HOSTS until it is listed
there. Phones and other machines on the network still open them by LAN
address or .local name.

* fix(cli): a local render of a received composition leaves out files outside the project

When the composition a local render opens is listed in the project's
received-files record, hyperframes render (full and range) no longer
brings in files outside the project. It prints one line naming the
references it leaves out and why. An unreadable record counts as
received. A project whose entry is the person's own, or that has no
record, renders exactly as before.

* fix(cli): received-render scan reads safely and treats an unreadable record as unknown

The scan behind the received-composition notice skips a file it cannot
read, finds url() references with a linear forward scan, and reads at
most 2 MB of each file. An unreadable received-files record no longer
counts as everything received for local render: the render keeps
outside files and names the record it could not read. Publish and cloud
upload still treat it as received. The notice now says the render stops
on a sub-composition outside the project rather than leaving it out.

* fix(cli): the studio render of a received composition leaves out files outside the project

The Studio render route applies the same rule as hyperframes render:
when the composition it renders is listed in the received-files record,
the job does not bring in files outside the project, and the server log
names the references it refuses.

* chore(cli): name the unreadable received-files record helper without a comment

* fix(cli): local render refuses outside files when any composition it plays was received

The received-file rule for local render (CLI and Studio) now checks
every page and stylesheet the render pulls in, not only the entry, so
an own index.html that plays a received scene also reads nothing
outside the project, and the notice names the received file. An
unreadable, truncated or empty received-files record refuses outside
files too, as publish and cloud upload do, and the notice names the
record it could not read.

* fix(cli): decide a received render from the files the compiler reads

Local render (CLI and Studio) now leaves outside-file handling as it is
for a project with no received-files record or an empty one, without
scanning anything. When the record lists files, the compiler's own read
list for the composition decides: the bundler runs out of process with a
deadline and reports every project file it reads, so stylesheet imports
and files past any scan limit count. A received file in that list, a
build that fails or runs past its deadline, or an unreadable record
refuses outside files. The scan that names refused references in the
notice is advisory only: it guards every file system call, tracks visited
files by real path, and caps the files and bytes it reads.

* fix(cli,producer): decide a received render with the render compiler's own composition traversal

The producer exports renderCompositionFiles, which walks
data-composition-src with the same resolution, normalization and private
file rules the render's sub-composition pass uses; that pass now calls
the same helper. The received-render decision adds those files to the
bundler's read list, so leading-slash and percent-encoded references the
render reads count. The advisory scan resolves compositions the same way
and reads template contents.

* fix(cli): refuse outside files in a local render whenever the project has received files

A local render (CLI and Studio) reads nothing outside the project when
the project's received-files record lists any file, or cannot be read.
No static list matches what a render consumes: the page loads its
stylesheets and scripts through the browser at capture time, and
scripts can load more, so the decision no longer depends on one. The
reference scan stays only to name what the notice says is left out. This
drops the out-of-process bundler read list and the producer composition
walk added for that decision.

* fix(cli): refuse outside files only when a received file can load other files

A local render (CLI and Studio) reads nothing outside the project when
the received-files record cannot be read, or lists a received file that
can reference others: an .html, .htm, .css, .js, .mjs, .cjs or .svg
name, or content that reads as HTML, SVG or CSS. A project that only
received images, video, audio or fonts keeps bringing in outside files
as before.

* fix(cli): keep outside files only when every received file is positively media, a font or an image

A local render keeps bringing in outside files only when each file the
received-files record lists has a known media, font or image extension
and starts with that type's signature bytes. Any other received file, a
listed file that is missing or unreadable, or a mismatch between name
and content refuses outside files. An ancestor record's entries now
match a subfolder whose name is spelled in another Unicode form; the
entry keeps its own spelling on disk.

* fix(producer,core): a sub-composition must be an .html file

The render compiler and the runtime load a data-composition-src only
when it names an .html or .htm file. Any other file, such as an image or
video, is refused as a page: render stops naming it, and the runtime
reports the load failure without fetching it.

* fix(producer,cli): the render and static file servers forbid type sniffing

Both servers send X-Content-Type-Options: nosniff with every response,
so the browser loads a file only as the type its extension names: an
image or video cannot run as a script or apply as a stylesheet. .cjs is
served as JavaScript.

* test(cli): a received media file in a composition slot is refused as a page

* test(cli): an empty nested received-files record cannot hide an outer record's received page

* fix(cli): a received media file reached under another name refuses outside files

The received-render decision now compares file identities, not names.
It walks the project once, bounded by entry count and time, and refuses
outside files when a hardlink or a symlink with a name that is not
media reaches a received file, or when the walk cannot finish. A
received file with no identity matches nothing, as in the received
files check.

* fix(cli): compare received files by link target and keep outside files for an empty record

A received media file and every other project name are now compared by the
identity of the file they reach with links followed. A linked folder that
leads outside the project, or a file whose identity cannot be read, counts as
unchecked and refuses outside files. An empty received-files record keeps
outside files without walking the project.

* chore: raise the producer unpacked size budget for the composition file checks

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 09:48:01 +00:00
Michael Wang 6a7b4df7c8 fix(cli): add lists files from a received config's registry as received (#7820)
* fix(cli): add lists files from a received config's registry as received

When a project's hyperframes.json is listed in .hyperframes/received-files.json
and names a registry other than the public one, add now lists every file it is
about to write in that record before writing any of them. This covers every
caller of addToProject: add by name, by tag, several names, and Studio.

The decision reads the config the install uses, so a byte-order mark or another
spelling of the file on disk is handled the same way. A person's own config, the
public registry and a record that cannot be read are left as they are.

* fix(cli): list received files as they are written, under a shared lock

add now lists each file in the received-files record just before it writes
it, using the write-time decision, so a file kept because the person edited it
during the download is never listed. When an install fails, it takes back the
entries it listed but never wrote.

Changes to the record take .hyperframes/received-files.json.lock, created
exclusively. A writer retries for about 2 s, takes over a lock older than
about 10 s, and always releases it. A writer that cannot take the lock in time
fails with a clear error instead of writing past it.

* fix(cli): an unreadable config counts as received; a failed install keeps what is on disk

add now counts an install as received when hyperframes.json exists but cannot be
read or parsed, since that config is not proven to be the person's own. When an
install fails, it takes back only the entries it listed whose files are not on
disk; files that landed stay listed.

* fix(cli): the received-files lock resolves the project folder as the installer does

The record's lock and write resolved the project folder with fs.realpathSync,
while the containment check resolves targets with the native realpath. The two
can spell the same folder differently: a Windows short name or a folder typed
in another letter case. The target then looked outside the project and the
change was refused. The record now resolves the folder with the installer's
realProjectRoot, so the root and target compare in one spelling.

The failed-install tests now fail the write by stubbing it, which works on every
platform, instead of a read-only folder, which Windows ignores.
2026-11-15 09:10:08 +00:00
Michael WangandClaude Opus 5.5 c4d60c347f fix: Studio media routes refuse cross-site load, CLI escapes terminal text, batch outputs stay in their folder (#7779)
* fix(cli): batch render outputs stay inside the --output folder

A row value may still name a subfolder of the folder written before the
template's first placeholder, but a value that resolves outside it stops
the batch before any folder is made or file is written.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): project text shows control characters as visible escapes

compositions, lint, snapshot and info --media print composition ids, sources,
element ids, lint messages and media paths through one helper that writes
C0, DEL and C1 control characters out as \xNN, so they reach the terminal as
text. The CLI's own colors are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(studio-server): waveform and peaks key one cache entry per file and refuse other sites

Both caches are keyed on the resolved project-relative path, so another
spelling of the same file (a doubled or trailing slash) reads the cached
peaks instead of decoding again. Waveform and peaks requests that another
site makes are refused the way thumbnail requests already are; the Studio
page asks for both as itself.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(studio-server): preview stills run at most four at a time

A video's stand-in still is made through a small job queue: four at once,
32 more waiting, and a 503 with Retry-After beyond that. A waiting request
whose client goes away leaves the queue without starting ffmpeg.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): batch output folder check keeps backslash names and row-named paths

A trailing backslash counts as a separator only where it is one, and the
check compares path segments. A template that starts with a placeholder names
no folder, so each row's value is the whole output path as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): lint header shows control characters in file names as escapes

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(studio-server): a finished or in-progress still never waits for a still slot

Only a still that is neither on disk nor already being made takes one of
the four slots, through a hook resolveStill gives the route. Waiters queue
without a cap and nothing answers 503, since a poster is never asked for
again. A waiter whose client leaves still never starts ffmpeg; a request
that shared that waiter's still tries again on its own.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* chore: raise the studio-server packed budget to 172000

main already packs about 170 KB against a 168500 budget; the request guards,
still slots and cache-key change here add about 550 bytes.

* fix(core,studio-server): a preview served to another site offers no editing port

When the Studio server answers a preview document to another site's
request, it now marks the document, and the runtime's editing agent
ignores every connect in a marked document. The Studio's own frames,
which load the preview from the same origin, keep the editing port.
The marked copy carries no ETag, so it is never revalidated in place of
the unmarked one.

* fix(studio-server): a media still stops when no request waits on it

Each still job now counts the requests waiting on it. A request whose
connection closes leaves the job, and when the last one leaves, the
job's ffmpeg is killed and the job is forgotten, so the next request
starts afresh. A caller that passes no signal keeps the job running,
and a request that has already closed starts nothing.

* test(studio-server): group the still cancellation tests after the real-ffmpeg still test

* fix(studio-server): a preview framed by another site is never revalidated

A frame load of a preview from another site now drops If-None-Match and
If-Modified-Since before the route answers, so it always gets a fresh,
marked document instead of a 304 that could reuse the unmarked copy a
browser cached for the Studio's own page on the same site. Subresource
loads keep their validators.

* fix(cli): check findings and keyframes headers show control characters as escapes

check prints each finding's message, source file, selector and fix hint, and
keyframes prints each composition's name and source, through terminalText.

* test(studio-server): a request sharing an abandoned still waiter gets its still

* chore(studio-server): raise the unpacked size budget for the still job slots and cross-site guards

* fix(cli): layout and contrast lines in check show control characters as escapes

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 08:57:32 +00:00
Weiwei Wu a75e61f31c fix(cli): discover mounted scenes inside templates (#7822)
* fix(cli): discover mounted scenes inside templates

* test(cli): cover recursive template scene discovery

* test(cli): cover media edits in nested template scenes

* test(cli): cover nested audio edits and duplicate targets

* docs(cli): explain nested scene discovery and ambiguity
2026-11-15 08:47:04 +00:00
Michael Wang ded5e3eec2 perf: CSS url, @import, @font-face, style and comment scans run in linear time (#7809)
* perf(parsers): find CSS url() references in linear time

A new css-url-scans entry finds what each CSS url( regex in the compile path
and the runtime finds, match for match and group for group, with forward
scans. The regexes restart from every unclosed url(, @import or background:
and read to the end of the text each time, so their time grows with the
square or cube of the input. The scans read each character a bounded number
of times.

rewriteCssAssetUrls uses the scan in place of CSS_URL_RE, which stays
exported for existing callers. A fuzz test checks 20,000 generated pages
against the regexes, and timed tests cover 1 MB of each unclosed form.

The parsers packed-size budget rises to cover the new entry.

* perf(core): bundler, SVG id namespacing and runtime find CSS urls in linear time

The bundler's url() inlining, CSS-file rebasing and @import inlining and
hoisting, the SVG url(#id) rewrite, the runtime's sub-composition url()
rewrite and the scene swap's url and @import list now use the
@hyperframes/parsers css-url-scans entry. Each returns the same matches as
the regex it replaces, in time linear in the CSS length.

* perf(producer): compile finds CSS urls, imports and backgrounds in linear time

Asset collection, head-style @import coalescing, the ancestor
background-image check, remote background and font-face url localization and
local font embedding now use the @hyperframes/parsers css-url-scans entry,
which returns the same matches as the regexes it replaces. A timed test
covers remote background discovery on 200 KB of unclosed background urls.

* perf(parsers): scan style blocks, font-face blocks, comments and mask urls in linear time

css-url-scans gains forward scans for `<style>` blocks, `@font-face { }`
blocks, `/* */` comments, the quoted-or-bare `url()` form and the
`mask-image: … url()` declaration. Each returns the same matches and groups
as the regex in its doc comment. The fuzz test now checks all fifteen scans
on 20,000 generated pages, and the timed tests cover 1 MB of each unclosed
form.

* perf(core): strip and restore stylesheet comments in linear time

Bundling a stylesheet finds its comments with the parsers comment scan and
puts them back in one pass over the placeholders. A comment comes back
verbatim, including text such as `$'` that a string replacement pattern
would expand.

* perf(producer): find style and font-face blocks in linear time

Remote font discovery and local font embedding read `<style>` blocks and
`@font-face` rules with the parsers scans, which return the same blocks as
the regexes they replace.

* perf(lint): read stylesheet and mask-image urls in linear time

The missing stylesheet asset and texture mask rules find `url()` values with
the parsers scans, including the mask-image fallback for a stylesheet that
does not parse.

* perf(cli): rewrite published CSS urls in linear time

Publishing rewrites stylesheet `url()` references with the parsers scan in
place of CSS_URL_RE, with the same matches.

* chore: size budgets cover the CSS scans in parsers and inspector

verify:packed-manifests measures parsers at 894,913 unpacked bytes and
inspector at 3,764,456, both just over 1% above their budgets once the
linear CSS scans are bundled. The budgets rise to 900,000 and 3,790,000.

* perf(parsers): scan stylesheet links and CSS rules in linear time

css-url-scans gains forward scans for `<link … rel="stylesheet" …>` tags and
`selector { declarations }` rules that return the same matches and groups as
the regexes in their doc comments. Both join the 20,000-page fuzz test and
the 1 MB timed tests.

* perf(core): restore stylesheet imports and list scene font faces in linear time

Bundling a stylesheet puts its comment and @import placeholders back in one
pass, so an imported sheet comes back verbatim and is not searched again.
fontFaceBlocks lists @font-face rules with the parsers scan. A fuzz test
checks the one-pass restore against the sequential one on 20,000 sheets.

* perf(producer): find stylesheet links, CSS rules and font-face blocks in linear time

Font stylesheet inlining and project font discovery find stylesheet links,
and the ancestor background check finds CSS rules, with the parsers scans.
extractFontFaceBlocks matches every brace in one pass instead of counting
depth again from each @font-face; a fuzz test checks it against the depth
count on 20,000 sheets.

* test(core): time the CSS placeholder restore directly

The bundle test with 6,000 imports was timed mostly on 6,000 file reads,
which took 2.7 s on the Windows runner. The restore is now timed on its own
over 20,000 placeholders, and a short bundle test still checks that every
import of a sheet is inlined.
2026-11-15 08:22:52 +00:00
Michael Wang 797a622be9 fix(engine,cli): the playlist folder check reads HLS as ffmpeg does; snapshot runs it too (#7810)
* fix(engine): the media playlist check reads HLS lines and attributes as ffmpeg does

The folder check now finds every name ffmpeg's hls demuxer would open:
- lines end at CR, LF or NUL, and a line is also read cut at ffmpeg's
  4095-byte limit;
- URI attributes are split like ff_parse_key_value: quoted or bare values,
  with backslash escapes removed;
- leading ID3v2 tags are skipped before the playlist signature, and a file
  behind more than 16 of them is refused.

Each refused shape is checked against ffprobe 8 in the test: ffprobe opens
the outside file, and playlistLeavesItsFolder now refuses the list.

* fix(cli): snapshot never hands FFmpeg a project video that is a document or an escaping playlist

`hyperframes snapshot` decodes held project videos with FFmpeg and FFprobe.
It now runs the engine's media check first: a file that is a document, or an
HLS or ffconcat list naming files outside its folder (under any extension),
is skipped with a "not media" warning and never reaches FFprobe or FFmpeg.
Real clips and HLS lists of segments beside them snapshot as before.

* fix(engine): playlist check reads lines as bytes and refuses unreadable nested lists

- Playlist text is read as latin1, one character per byte, so a line is cut
  at 4095 bytes exactly where ffmpeg cuts it, even when it holds bytes that
  are not UTF-8. Nested names are opened by those same bytes.
- A nested name that exists but cannot be read is refused; a name that does
  not exist, or is too long to exist, is still kept.
- Each name is checked once, each file is opened once (ID3 header and head
  in one read), and each file's verdict is reused within a call: 100k
  segments naming one file drop from seconds to tens of milliseconds.

* perf(cli): snapshot checks each project video once and warns once when it is refused

* test(engine): the ffprobe playlist proof ends its options with -- before the input

* chore(engine): raise the packed size budget to 500000 bytes

The byte-exact HLS playlist parser adds about 6 KB to the packed engine
(496647 in CI against a 490452 budget).

* fix(engine): media inspection never waits on a FIFO or device

The document sniff and the playlist walk open with O_RDONLY|O_NONBLOCK where
the platform has it, fstat the descriptor, and refuse anything that is not a
regular file before reading; a folder still fails as it did. A FIFO with no
writer, as a media source or named in a list, is refused at once.

* fix(cli): snapshot inspects project videos within the probe deadline and its cleanup scope

The held-video hints are gathered inside the capture's cleanup scope, and
every media inspection gives up after the same 30 s limit as the FFprobe
call it guards, treating the file as not media.
2026-11-15 07:35:29 +00:00
Michael WangandClaude Opus 5.5 a07d4cf738 fix(cli): printed Windows commands read folder names literally in every shell (#7769)
* fix(cli): printed Windows commands read folder names literally in PowerShell, cmd and Git Bash

shellArg's Windows branch wrapped any non-plain name in double quotes,
where PowerShell and Git Bash still expand $ and backticks. Names with
those characters (or PowerShell's curly quotes) are now single-quoted,
which both shells read literally; a name that cmd.exe would also split
on & | < > ^ gets no printed path, and the hint says to run the command
from the project folder. A bare comma or leading @ is quoted so
PowerShell does not read an array or a splat. Ordinary names with
spaces, accents and apostrophes print as before.

The background preview's stop footer uses the same helper instead of
JSON quoting, which left $(...) live in POSIX shells and PowerShell.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): printed Windows paths with backslashes keep them in Git Bash

A Windows word containing a backslash printed bare, and Git Bash strips
unquoted backslashes, so C:\Users\Bob\film reached the CLI as
C:UsersBobfilm. Such words now take double quotes, which PowerShell,
cmd.exe and Git Bash all read as written; trailing backslashes are
doubled so they do not escape the closing quote.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): open --json gives a null stopCommand when the folder has no safe spelling

When no spelling of the project folder is safe to paste in every Windows
shell, the left-running preview's stopCommand held prose. It is now null,
and stopCommandFromProject names the command to run from inside the
project folder. The printed line is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* chore(cli): drop a comment the nullable return type already states

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): a Windows name with no spelling common to every shell prints no path

PowerShell single quotes do not group a word in cmd.exe, and Git Bash
reads 'it''s' as its, so the single-quoted form printed for names with
$, a backtick or a curly double quote was wrong in two of the three
shells. Those names now take the existing null fallback, and the hint
says to run the command from the project folder.

Round-trip tests check that every printed Windows word reaches the
program unchanged: through Git Bash everywhere, and through cmd.exe and
PowerShell on Windows, where the CLI's Windows CI job now runs them.
The names cover apostrophes, typographic quotes, mixed quotes, cmd
operators and trailing backslashes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* test(cli): run the cmd.exe round-trip through spawnSync

execFileSync's options type has no windowsVerbatimArguments, so the
Windows-only cmd.exe test failed typecheck. spawnSync takes the option,
and the test now also checks the exit status.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* test(cli): expect the quoted Windows path in the relative open command

On Windows a relative path holds a backslash, which shellArg now prints in
double quotes so Git Bash keeps it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): a Windows name with %NAME% or ! prints no path

cmd.exe expands %NAME% inside double quotes, and interactive Git Bash
history-expands ! there, so neither name reads literally in every
Windows shell. Both now take the null fallback. A lone % such as 100%
still prints.

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 06:35:32 +00:00
Michael Wang 80b09cc94a fix(cli): nested received records only add; a received .env never picks the account; font names stay out of agent files (#7808)
* fix(cli): a file is received when any record at or above the staged folder lists it

A received-files record inside a staged subfolder could list nothing and
hide the project's own record, so outside references from received files
were copied into the upload again. Every record from the staged folder up
is now read: a nested record can add received files but never remove them.

* fix(cli): a HeyGen key from a project .env never replaces a saved credential

A HEYGEN_API_KEY or HYPERFRAMES_API_KEY that only the folder's .env set now
ranks after the person's stored login and saved API key, in the CLI resolver
(cloud render, publish, media helpers) and in the media-use skill scripts.
With no saved credential the project key still works, and the first use
prints one line naming the variable and the .env it came from. A key
exported in the shell keeps its current precedence.

* fix(cli): capture's agent files count the page's fonts instead of naming them

Font family names come from the captured page, and a short phrase passed the
plain-name check into AGENTS.md, CLAUDE.md and .cursorrules. The Brand Summary
now gives the number of font families and points to extracted/tokens.json,
which already holds the names as data.

* fix(cli): only a received project .env key gives way to a saved credential

A HeyGen key from a project .env now comes after the stored login and
saved API key only when that .env came in with a received project: a
received-files record at or above the folder lists it, or a record there
cannot be read. A person's own .env keeps its priority. The media-use skill
scripts read the same records and apply the same rule.

* fix(cli): a shell key wins over a received .env key under either name

* docs(cli): a received project's .env key comes after the saved login and key

* fix(cli): drop the duplicate font count from capture's agent files

The Brand Summary repeated the font count the file table already gives,
and counted entries that are not font names. The table row stays.

* fix(cli): name the received-files record in the skill comment without a path
2026-11-15 06:34:14 +00:00
wonjangandClaude Fable 5.2 8dbbc1d371 fix(registry): caption keywords, emoji and aftershock work for words outside a-z (#7804)
caption-emoji-pop and caption-neon-accent look a word up in KEYWORDS and
WORD_EMOJI after stripping everything outside a-z, and caption-glitch-rgb
counts a word's \w characters to decide on the aftershock. A Korean, Cyrillic
or accented word comes out empty or cut, so a keyword written in that script
never matches and a long word never pulses.

The three components now strip by Unicode letter (\p{L}) instead, which is
the same set for a lowercased English transcript.

Co-authored-by: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-15 05:44:00 +00:00
James RussoandClaude Opus 5.5 477a3aea13 fix(cli): upload archives always leave out env files and private records (#7796)
publish, cloud render and feedback --file-issue build their archive from a
walk of the project folder that only consulted .hyperframesignore, so a rule
re-including dotfiles also uploaded .env files. The walk now leaves out env
files, Git data and Studio's private records whatever the ignore rules say,
and reports each one as left out with the reason "private".

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 02:39:36 +00:00
James RussoandClaude Opus 5.5 83eae240fb fix(cli): start helper programs only from trusted PATH folders on every platform (#7787)
* fix(cli): start helper programs only from trusted PATH folders on every platform

At startup the CLI and its worker entry points rewrite their own PATH to
absolute folders outside the working directory, on every platform, so a
program planted in the project (a relative or empty PATH entry,
node_modules/.bin, or any folder inside the cwd) is never run by name.
Child processes inherit the trimmed PATH. media-use reuses the same helper
instead of its private copy.

doctor resolves docker with findTrustedExecutable and runs it by absolute
path with execFileSync, no shell. A docker found only in the project's
node_modules/.bin is reported as not found, with a hint that it was skipped.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): keep stale-install detection and Windows system folders after PATH trim

The stale hyperframes check for reverse start reads the PATH the process
started with, so an older copy in the project's node_modules/.bin is still
reported. It only reads the filesystem and never runs that copy.

On Windows the trim now keeps %SystemRoot%, System32, System32\Wbem and
the WindowsPowerShell folder even when the CLI starts inside them, so an
elevated prompt in C:\Windows\System32 can still run cmd, taskkill,
tasklist, powershell and tar. PATH entries wrapped in double quotes are
unquoted before the check instead of being dropped. PATH order is kept.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): resolve the empty-PATH placeholder only when it is needed

Computing it at import threw in test environments where import.meta.url is not a file URL.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 01:24:20 +00:00
Michael WangandClaude Opus 5.5 870b1fa4dc fix(cli,studio-server): received-file guard covers subfolders and spellings; playlists named as media never reach ffmpeg (#7771)
* fix(cli): a subfolder of an imported project keeps its received-files record

Publish, cloud render and feedback now read the received-files record at
the nearest folder at or above the one they stage, so staging a subfolder
of an imported project still leaves out the outside files its received
files reference.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): a received file counts under any spelling of the same file on disk

The received-files lookup now also matches a project file that is the
same file on disk as a listed path, so a name respelled in letter case on
a case-insensitive disk keeps its received status.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): cloud render prepares only the GIFs staging kept

The entry GIF prep before a cloud render upload now reads only the staged
copies it is handed. An image whose source staging left out keeps its
reference as written and is never read from disk.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli,studio-server): never hand a playlist named as media to ffmpeg

A media file whose first bytes are an HLS playlist, an XML manifest or a
concat script now stays out of ffprobe and ffmpeg: cloud render leaves it
in the zip as authored, the media probe reports it as not media, and the
proxy copy refuses it. Real media never starts with these bytes, so it
probes and transcodes as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(studio-server): catch playlists with control bytes, and keep them from stills and audio probes

A text playlist or concat script is detected whatever bytes follow its
first line; only markup must be all text. A still frame and the audio
probe behind waveforms, peaks and loudness now refuse a file the probe
reads as not media, as the proxy copy already does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): a parent folder's state the CLI cannot read never marks a project received

The walk up for a received-files record now skips a parent whose record
cannot be reached. Only a record file that is there but cannot be read
or parsed counts every file as received.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): a drive that reports no file ids matches no received file by identity

Some network and virtual drives report a file id of 0 for every file, so
the same-file match now gives such a file no identity instead of
matching it to every listed file.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* refactor(studio-server): read a media file's first bytes with a read stream

The playlist check reads the first 64 bytes through a bounded read
stream instead of a raw file descriptor, and the audio-track probe's doc
comment sits on its function again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* chore(studio-server): raise the packed size budget for the media playlist check

Main packs @hyperframes/studio-server close to the 1% tolerance on the
168500 budget, and the playlist check adds about 320 bytes, which put
the Build over. Set the budget to 172000.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli,studio-server): open media only through self-contained media demuxers

Every ffprobe and ffmpeg input that cloud render offload, the publish
proxy bake and Studio's media helpers open now carries a demuxer
whitelist built from the supported media extensions: MP4/MOV/M4A/AVIF,
Matroska/WebM, MXF, AVI, MPEG-PS/TS, FLV, ASF, Ogg, WAV, MP3, AAC, FLAC,
AIFF and the still-image formats. Playlist, manifest and concat demuxers
can no longer open, whatever a file's bytes say. The proxy's own concat
step is left as it is.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli,studio-server): keep media probe argv flat, and expect the demuxer list in loudness args

Two probe argv literals built from nested spreads are flat again, so
"--" stays the visible second-to-last entry the argv contract checks.
The normalize-audio test expects the demuxer list before the input.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 00:33:29 +00:00
James RussoandClaude Opus 5.5 27b195febc fix(cli): keep Chrome's sandbox on for website capture where the host supports it (#7774)
* fix(cli): keep Chrome's sandbox on for website capture where the host supports it

`hyperframes capture` added --no-sandbox on every Linux host. It now uses the
engine's host check, the same one rendering uses: the sandbox stays on unless
the process runs as root, in a container or serverless runtime, or with user
namespaces restricted. HYPERFRAMES_CHROME_SANDBOX=0/1 still overrides, and a
launch Chrome refuses with the sandbox is still retried without it. When the
host check turns the sandbox off, capture prints a one-time warning.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): drop the new comment block from the capture launch args

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 00:20:52 +00:00
James RussoandClaude Opus 5.5 e4e93d6ed9 fix(cli): keep captured page text out of generated agent instruction files (#7772)
* fix(cli): keep captured page text out of generated agent instruction files

The AGENTS.md / CLAUDE.md / .cursorrules files that `hyperframes capture`
writes are loaded by coding agents as instructions. The heading now uses the
captured site's hostname instead of the page title, font names are kept only
when they read as plain names, and the file states that everything the capture
saved from the website is data, not instructions.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(cli): trim the font-name comment

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-15 00:20:48 +00:00
Michael WangandClaude Opus 5.5 603395c89a fix: render file servers refuse env and Git files; shown-box sampling stays within the render (#7765)
* fix(producer): shown-box sampling stays within the validated render duration

Sampling where each oversized video is drawn stepped through the authored
start and end in 0.25 s float steps with no bound, before the render
duration was checked. An enormous start never advanced the step, and an
unbounded end grew the sample set until memory ran out.

The render duration is now validated first, each window is cut at the
composition's end, a window that is not finite is skipped, and the loop
counts integer steps. Building the sample list happens inside the
measurement's try, so any failure falls back to full-size extraction.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix: render and capture file servers refuse env files and Git data

The producer render file server, the engine file server and the CLI
static project server served every regular file under the project to the
page, including `.env*` files and anything under `.git`. Compile already
refuses to inline those files, and Studio preview and play refuse to
serve them.

All three now answer 404 for them through the shared isVcsOrSecretPath
rule, checked on the requested name and on a link's target, with the
case and Windows spelling variants it already covers.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 23:36:46 +00:00
Miguel Ángel a6ff3922b4 fix(engine): renders reach only public addresses from every part of the browser (#7758)
* fix(engine): renders reach only public addresses from every part of the browser

* fix(engine): renders reach only public addresses from every part of the browser

* fix(engine): renders reach only public addresses from every part of the browser

* fix(engine): renders reach only public addresses from every part of the browser
2026-11-14 16:38:35 -05:00
Miguel Ángel cb52dcf646 fix(cli): an unknown flag's error leaves out hidden rename shims (#7746)
* fix(cli): an unknown flag's list leaves out hidden rename shims

The list pointed agents at init's --template, --video-legacy and --agent,
which only print an error. It now shows the flags --help shows.

* fix(cli): an unknown flag never suggests a hidden rename shim

The did-you-mean search still used every spelling, so '--templat' on init
was pointed at the hidden --template. It now uses the same visible flags
the list shows.
2026-11-14 16:06:47 +00:00
Miguel Ángel d26ec25385 fix(cli): check still reports a film's other GL driver notes (#7745)
The filter for check's own readback stalls matched every GL driver
Performance note. It now matches only the ReadPixels stall.
2026-11-14 15:28:36 +00:00
Miguel Ángel 88beb282f2 fix(cli): an unknown flag lists the command's real flags (#7740)
The error only said to run --help, so an agent guessed another flag. It now
names every long flag the command declares, and --search points to --query.
2026-11-14 14:46:32 +00:00
Miguel Ángel e21e64f6ab fix(registry): caption-highlight clears a short word's highlight when the word ends (#7735)
* fix(registry): caption-highlight clears a short word's highlight when the word ends

On a word shorter than 0.05 s the 0.15 s fade-in outlived the fade-out, so
a frame inside that tail lit the highlight again until the phrase ended.

* fix(registry): leave the generated caption-highlight catalog files to the generator
2026-11-14 14:39:00 +00:00
Miguel Ángel 35d145157b fix(cli): check no longer reports GPU stalls from its own pixel reads as the film's warnings (#7736)
check copies each canvas into a 2D context to see whether it moved. On WebGL
that readback makes Chrome log a GL driver Performance note, which check then
listed as a console warning from the composition.
2026-11-14 14:33:10 +00:00
Miguel Ángel c31e7dd08c fix(cli): check times a line held across a split clip as one hold (#7733)
* fix(cli): check times a line held across a split clip as one hold

A clip split in two hands its line to a second element at the same place.
line_unread timed each element alone, so the first half warned while the
same text stayed on screen.

* refactor(cli): name the split-clip line hand-off instead of commenting it
2026-11-14 13:45:08 +00:00