* fix(cli): snapshot shows control characters in composition text as escapes
* fix(studio-server): making or serving a still sweeps the transcode cache
* feat(studio-server): an opaque preview loads its images, media and fetched files
* refactor(studio-server): the fetch grant's reach is named, not commented
* test(studio-server): the main preview loads under the frame-token path
* fix(studio-server): previews with no fetch metadata on a LAN host count as another site
Browsers send no Sec-Fetch-Site header over plain HTTP to a non-loopback
name, such as a LAN address used with HYPERFRAMES_PREVIEW_HOST. The preview
guards now count such a request as the Studio's own page only when its
Referer names the same host. Otherwise the preview is marked and sandboxed,
its validators are dropped, and the thumbnail, waveform, peaks and
frame-token routes refuse it.
* fix(cli): play marks and sandboxes compositions another site loads
The play server's /composition/* route now applies the same another-site
decision as the Studio preview. A load from another site comes back with
the sandbox CSP and without validators, and its HTML carries the
hyperframes-preview-for-another-site mark, so the runtime offers that site
no editing port. The play page's own player is unchanged.
* fix(player): send a same-origin Referer from the composition frame
The player's composition iframe used no-referrer, so on a plain-HTTP LAN
host its own composition load carried neither Sec-Fetch-Site nor Referer
and the Studio and play servers sandboxed it as another site's load.
same-origin sends the host page's URL only to a composition on the same
origin, so another origin still learns nothing about the embedding page.
* fix(cli): uploads leave out outside scripts; .ts counts as video only when it is one
* chore(studio-server): raise unpacked size budget for the upload file-type rule
* fix(studio-server): transport stream check never waits on a pipe and needs binary bytes
* fix(cli): a subfolder of an imported project keeps its received-files record
Publish, cloud render and feedback now read the received-files record at
the nearest folder at or above the one they stage, so staging a subfolder
of an imported project still leaves out the outside files its received
files reference.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): a received file counts under any spelling of the same file on disk
The received-files lookup now also matches a project file that is the
same file on disk as a listed path, so a name respelled in letter case on
a case-insensitive disk keeps its received status.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): cloud render prepares only the GIFs staging kept
The entry GIF prep before a cloud render upload now reads only the staged
copies it is handed. An image whose source staging left out keeps its
reference as written and is never read from disk.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli,studio-server): never hand a playlist named as media to ffmpeg
A media file whose first bytes are an HLS playlist, an XML manifest or a
concat script now stays out of ffprobe and ffmpeg: cloud render leaves it
in the zip as authored, the media probe reports it as not media, and the
proxy copy refuses it. Real media never starts with these bytes, so it
probes and transcodes as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(studio-server): catch playlists with control bytes, and keep them from stills and audio probes
A text playlist or concat script is detected whatever bytes follow its
first line; only markup must be all text. A still frame and the audio
probe behind waveforms, peaks and loudness now refuse a file the probe
reads as not media, as the proxy copy already does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): a parent folder's state the CLI cannot read never marks a project received
The walk up for a received-files record now skips a parent whose record
cannot be reached. Only a record file that is there but cannot be read
or parsed counts every file as received.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): a drive that reports no file ids matches no received file by identity
Some network and virtual drives report a file id of 0 for every file, so
the same-file match now gives such a file no identity instead of
matching it to every listed file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* refactor(studio-server): read a media file's first bytes with a read stream
The playlist check reads the first 64 bytes through a bounded read
stream instead of a raw file descriptor, and the audio-track probe's doc
comment sits on its function again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* chore(studio-server): raise the packed size budget for the media playlist check
Main packs @hyperframes/studio-server close to the 1% tolerance on the
168500 budget, and the playlist check adds about 320 bytes, which put
the Build over. Set the budget to 172000.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli,studio-server): open media only through self-contained media demuxers
Every ffprobe and ffmpeg input that cloud render offload, the publish
proxy bake and Studio's media helpers open now carries a demuxer
whitelist built from the supported media extensions: MP4/MOV/M4A/AVIF,
Matroska/WebM, MXF, AVI, MPEG-PS/TS, FLV, ASF, Ogg, WAV, MP3, AAC, FLAC,
AIFF and the still-image formats. Playlist, manifest and concat demuxers
can no longer open, whatever a file's bytes say. The proxy's own concat
step is left as it is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli,studio-server): keep media probe argv flat, and expect the demuxer list in loudness args
Two probe argv literals built from nested spreads are flat again, so
"--" stays the visible second-to-last entry the argv contract checks.
The normalize-audio test expects the demuxer list before the input.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): play and present answer only local host names and allowed hosts
play and present listen on every interface. Each request now passes the
same Host check preview uses: localhost, loopback addresses and this
machine's own addresses and names are answered, and any other host name
gets a 403 naming HYPERFRAMES_PREVIEW_ALLOWED_HOSTS until it is listed
there. Phones and other machines on the network still open them by LAN
address or .local name.
* fix(cli): a local render of a received composition leaves out files outside the project
When the composition a local render opens is listed in the project's
received-files record, hyperframes render (full and range) no longer
brings in files outside the project. It prints one line naming the
references it leaves out and why. An unreadable record counts as
received. A project whose entry is the person's own, or that has no
record, renders exactly as before.
* fix(cli): received-render scan reads safely and treats an unreadable record as unknown
The scan behind the received-composition notice skips a file it cannot
read, finds url() references with a linear forward scan, and reads at
most 2 MB of each file. An unreadable received-files record no longer
counts as everything received for local render: the render keeps
outside files and names the record it could not read. Publish and cloud
upload still treat it as received. The notice now says the render stops
on a sub-composition outside the project rather than leaving it out.
* fix(cli): the studio render of a received composition leaves out files outside the project
The Studio render route applies the same rule as hyperframes render:
when the composition it renders is listed in the received-files record,
the job does not bring in files outside the project, and the server log
names the references it refuses.
* chore(cli): name the unreadable received-files record helper without a comment
* fix(cli): local render refuses outside files when any composition it plays was received
The received-file rule for local render (CLI and Studio) now checks
every page and stylesheet the render pulls in, not only the entry, so
an own index.html that plays a received scene also reads nothing
outside the project, and the notice names the received file. An
unreadable, truncated or empty received-files record refuses outside
files too, as publish and cloud upload do, and the notice names the
record it could not read.
* fix(cli): decide a received render from the files the compiler reads
Local render (CLI and Studio) now leaves outside-file handling as it is
for a project with no received-files record or an empty one, without
scanning anything. When the record lists files, the compiler's own read
list for the composition decides: the bundler runs out of process with a
deadline and reports every project file it reads, so stylesheet imports
and files past any scan limit count. A received file in that list, a
build that fails or runs past its deadline, or an unreadable record
refuses outside files. The scan that names refused references in the
notice is advisory only: it guards every file system call, tracks visited
files by real path, and caps the files and bytes it reads.
* fix(cli,producer): decide a received render with the render compiler's own composition traversal
The producer exports renderCompositionFiles, which walks
data-composition-src with the same resolution, normalization and private
file rules the render's sub-composition pass uses; that pass now calls
the same helper. The received-render decision adds those files to the
bundler's read list, so leading-slash and percent-encoded references the
render reads count. The advisory scan resolves compositions the same way
and reads template contents.
* fix(cli): refuse outside files in a local render whenever the project has received files
A local render (CLI and Studio) reads nothing outside the project when
the project's received-files record lists any file, or cannot be read.
No static list matches what a render consumes: the page loads its
stylesheets and scripts through the browser at capture time, and
scripts can load more, so the decision no longer depends on one. The
reference scan stays only to name what the notice says is left out. This
drops the out-of-process bundler read list and the producer composition
walk added for that decision.
* fix(cli): refuse outside files only when a received file can load other files
A local render (CLI and Studio) reads nothing outside the project when
the received-files record cannot be read, or lists a received file that
can reference others: an .html, .htm, .css, .js, .mjs, .cjs or .svg
name, or content that reads as HTML, SVG or CSS. A project that only
received images, video, audio or fonts keeps bringing in outside files
as before.
* fix(cli): keep outside files only when every received file is positively media, a font or an image
A local render keeps bringing in outside files only when each file the
received-files record lists has a known media, font or image extension
and starts with that type's signature bytes. Any other received file, a
listed file that is missing or unreadable, or a mismatch between name
and content refuses outside files. An ancestor record's entries now
match a subfolder whose name is spelled in another Unicode form; the
entry keeps its own spelling on disk.
* fix(producer,core): a sub-composition must be an .html file
The render compiler and the runtime load a data-composition-src only
when it names an .html or .htm file. Any other file, such as an image or
video, is refused as a page: render stops naming it, and the runtime
reports the load failure without fetching it.
* fix(producer,cli): the render and static file servers forbid type sniffing
Both servers send X-Content-Type-Options: nosniff with every response,
so the browser loads a file only as the type its extension names: an
image or video cannot run as a script or apply as a stylesheet. .cjs is
served as JavaScript.
* test(cli): a received media file in a composition slot is refused as a page
* test(cli): an empty nested received-files record cannot hide an outer record's received page
* fix(cli): a received media file reached under another name refuses outside files
The received-render decision now compares file identities, not names.
It walks the project once, bounded by entry count and time, and refuses
outside files when a hardlink or a symlink with a name that is not
media reaches a received file, or when the walk cannot finish. A
received file with no identity matches nothing, as in the received
files check.
* fix(cli): compare received files by link target and keep outside files for an empty record
A received media file and every other project name are now compared by the
identity of the file they reach with links followed. A linked folder that
leads outside the project, or a file whose identity cannot be read, counts as
unchecked and refuses outside files. An empty received-files record keeps
outside files without walking the project.
* chore: raise the producer unpacked size budget for the composition file checks
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): batch render outputs stay inside the --output folder
A row value may still name a subfolder of the folder written before the
template's first placeholder, but a value that resolves outside it stops
the batch before any folder is made or file is written.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): project text shows control characters as visible escapes
compositions, lint, snapshot and info --media print composition ids, sources,
element ids, lint messages and media paths through one helper that writes
C0, DEL and C1 control characters out as \xNN, so they reach the terminal as
text. The CLI's own colors are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(studio-server): waveform and peaks key one cache entry per file and refuse other sites
Both caches are keyed on the resolved project-relative path, so another
spelling of the same file (a doubled or trailing slash) reads the cached
peaks instead of decoding again. Waveform and peaks requests that another
site makes are refused the way thumbnail requests already are; the Studio
page asks for both as itself.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(studio-server): preview stills run at most four at a time
A video's stand-in still is made through a small job queue: four at once,
32 more waiting, and a 503 with Retry-After beyond that. A waiting request
whose client goes away leaves the queue without starting ffmpeg.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): batch output folder check keeps backslash names and row-named paths
A trailing backslash counts as a separator only where it is one, and the
check compares path segments. A template that starts with a placeholder names
no folder, so each row's value is the whole output path as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): lint header shows control characters in file names as escapes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(studio-server): a finished or in-progress still never waits for a still slot
Only a still that is neither on disk nor already being made takes one of
the four slots, through a hook resolveStill gives the route. Waiters queue
without a cap and nothing answers 503, since a poster is never asked for
again. A waiter whose client leaves still never starts ffmpeg; a request
that shared that waiter's still tries again on its own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* chore: raise the studio-server packed budget to 172000
main already packs about 170 KB against a 168500 budget; the request guards,
still slots and cache-key change here add about 550 bytes.
* fix(core,studio-server): a preview served to another site offers no editing port
When the Studio server answers a preview document to another site's
request, it now marks the document, and the runtime's editing agent
ignores every connect in a marked document. The Studio's own frames,
which load the preview from the same origin, keep the editing port.
The marked copy carries no ETag, so it is never revalidated in place of
the unmarked one.
* fix(studio-server): a media still stops when no request waits on it
Each still job now counts the requests waiting on it. A request whose
connection closes leaves the job, and when the last one leaves, the
job's ffmpeg is killed and the job is forgotten, so the next request
starts afresh. A caller that passes no signal keeps the job running,
and a request that has already closed starts nothing.
* test(studio-server): group the still cancellation tests after the real-ffmpeg still test
* fix(studio-server): a preview framed by another site is never revalidated
A frame load of a preview from another site now drops If-None-Match and
If-Modified-Since before the route answers, so it always gets a fresh,
marked document instead of a 304 that could reuse the unmarked copy a
browser cached for the Studio's own page on the same site. Subresource
loads keep their validators.
* fix(cli): check findings and keyframes headers show control characters as escapes
check prints each finding's message, source file, selector and fix hint, and
keyframes prints each composition's name and source, through terminalText.
* test(studio-server): a request sharing an abandoned still waiter gets its still
* chore(studio-server): raise the unpacked size budget for the still job slots and cross-site guards
* fix(cli): layout and contrast lines in check show control characters as escapes
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(studio-server): replace lock start records by rename
The owner lock's start records (owner.pid.start, owner.pid.evict.start) and
the daily prune stamp are written through replaceFileAtomically: an exclusive
temp sibling renamed over the name. A symlink, hard link or other entry already
at that name is replaced rather than written through.
Lock files (owner.pid, its start record, owner-url.json) are read with
O_NOFOLLOW and O_NONBLOCK and only when they are regular files, so a link is
not followed and a FIFO is not waited on.
* fix(studio-server): clear lock records before replacing them
The start records and the daily prune stamp are removed before the rename,
so a symlink to a read-only file or a read-only file at that name no longer
fails the write. The prune stamp is read without following links or waiting
on a FIFO, like the other lock files.
publish, cloud render and feedback --file-issue build their archive from a
walk of the project folder that only consulted .hyperframesignore, so a rule
re-including dotfiles also uploaded .env files. The walk now leaves out env
files, Git data and Studio's private records whatever the ignore rules say,
and reports each one as left out with the reason "private".
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): a subfolder of an imported project keeps its received-files record
Publish, cloud render and feedback now read the received-files record at
the nearest folder at or above the one they stage, so staging a subfolder
of an imported project still leaves out the outside files its received
files reference.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): a received file counts under any spelling of the same file on disk
The received-files lookup now also matches a project file that is the
same file on disk as a listed path, so a name respelled in letter case on
a case-insensitive disk keeps its received status.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): cloud render prepares only the GIFs staging kept
The entry GIF prep before a cloud render upload now reads only the staged
copies it is handed. An image whose source staging left out keeps its
reference as written and is never read from disk.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli,studio-server): never hand a playlist named as media to ffmpeg
A media file whose first bytes are an HLS playlist, an XML manifest or a
concat script now stays out of ffprobe and ffmpeg: cloud render leaves it
in the zip as authored, the media probe reports it as not media, and the
proxy copy refuses it. Real media never starts with these bytes, so it
probes and transcodes as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(studio-server): catch playlists with control bytes, and keep them from stills and audio probes
A text playlist or concat script is detected whatever bytes follow its
first line; only markup must be all text. A still frame and the audio
probe behind waveforms, peaks and loudness now refuse a file the probe
reads as not media, as the proxy copy already does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): a parent folder's state the CLI cannot read never marks a project received
The walk up for a received-files record now skips a parent whose record
cannot be reached. Only a record file that is there but cannot be read
or parsed counts every file as received.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): a drive that reports no file ids matches no received file by identity
Some network and virtual drives report a file id of 0 for every file, so
the same-file match now gives such a file no identity instead of
matching it to every listed file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* refactor(studio-server): read a media file's first bytes with a read stream
The playlist check reads the first 64 bytes through a bounded read
stream instead of a raw file descriptor, and the audio-track probe's doc
comment sits on its function again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* chore(studio-server): raise the packed size budget for the media playlist check
Main packs @hyperframes/studio-server close to the 1% tolerance on the
168500 budget, and the playlist check adds about 320 bytes, which put
the Build over. Set the budget to 172000.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli,studio-server): open media only through self-contained media demuxers
Every ffprobe and ffmpeg input that cloud render offload, the publish
proxy bake and Studio's media helpers open now carries a demuxer
whitelist built from the supported media extensions: MP4/MOV/M4A/AVIF,
Matroska/WebM, MXF, AVI, MPEG-PS/TS, FLV, ASF, Ogg, WAV, MP3, AAC, FLAC,
AIFF and the still-image formats. Playlist, manifest and concat demuxers
can no longer open, whatever a file's bytes say. The proxy's own concat
step is left as it is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli,studio-server): keep media probe argv flat, and expect the demuxer list in loudness args
Two probe argv literals built from nested spreads are flat again, so
"--" stays the visible second-to-last entry the argv contract checks.
The normalize-audio test expects the demuxer list before the input.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(studio-server): save an edit Windows briefly holds without freezing the app
* fix(studio-server): keep later edits behind a held one, one backup per replay
* fix(studio-server): send a held cut again, and keep the sync retry for rollbacks
* fix(studio-server): check and render keep their history on a drive without hard links
The history lock had its own list of the errors that mean a drive cannot
hard-link, and it lacked EISDIR, which Windows returns on a Google Drive
folder. Every check report and render record there failed. The lock now
uses core's list, the one owner, which also gains ENOSYS from the lock.
* fix(engine): downloads and plan blobs publish on a drive without hard links
The producer's plan publisher kept a third list of no-hard-link errors
without EISDIR, and the downloader had no fallback, so both failed on a
Google Drive folder. Both now use core's cannotHardLink; the downloader
copies into an exclusively created file, so it still never overwrites.
* fix(engine): a download on a drive without hard links publishes atomically
Instead of copying into an exclusively created file, the fallback renames
the staged download into place under the cache path lock when nothing is
there yet, so a killed run never leaves a truncated file to reuse.
* fix(studio-server): an edit to a read-only project file is refused and leaves it unchanged
* test(core): read the refused file without a stat check first
Raise the direct ranges so the workspace and published packages resolve
patched releases: tar 7.5.22, hono 4.13.16, @hono/node-server 2.1.6,
adm-zip 0.6.1, sharp 0.35.5 and postcss-selector-parser 7.1.7. The CLI's
on-demand sharp install moves to 0.35.5 with them.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
oxfmt 0.41 pins tinypool 2.1.0 (GHSA-5gmw-xhrv-c9v3, GHSA-85c8-ppgw-ccpr).
Every oxfmt release before 0.67 pins 2.1.0, and 0.67+ reformats 66 files,
so override tinypool to the drop-in 2.1.2 patch instead of bumping oxfmt.
Also bump vite ^6.4.2 -> ^6.4.5 and vitest/@vitest/coverage-v8
^4.1.11 -> ^4.1.12 (pulls @vitest/mocker 4.1.12).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(producer): local renders bring in only media, font, CSS and JS from outside the project
Local renders (`render`, range render, `benchmark`, the Studio server and the
Vite Studio adapter) run with allowOutsideProjectAssets, which copied every
existing file that markup named outside the project into compiled/hf-ext, of
any type and from any folder, and served project links that lead outside
without looking at where they lead. Publish already applies a policy here:
outside references are kept, private locations are left out, and only image,
video, audio, font, CSS and JS files are copied. Local renders now follow the
same policy.
The publish predicates (private location, copied file type, left-out wording)
move from the CLI to a new `@hyperframes/studio-server/outside-file` subpath,
since the producer cannot import the CLI and already depends on studio-server.
The CLI re-exports them, so publish behaves as before. The media extension
sets move with them because the copied-type list includes them.
The producer decides with one predicate, `outsideAssetRefusal` in
utils/paths.ts, and applies it wherever allowOutsideProjectAssets lets an
outside file in, so no entry point can skip it:
- collectExternalAssets: src/href/url() references, which covers <a href> and
<link href>
- dropMediaOutsideProject: video/audio/image sources in any spelling the media
resolver accepts (file: URLs, percent-encoding), so nothing probes or
extracts them
- the render file server: project links that lead outside
- the distributed plan's project copy: the same links (range render)
- GIF/HEIC prep and sub-composition links: private locations only, since
those inputs are converted or compiled rather than copied as they are
Each left-out file logs the publish wording with "left out of the render".
To reproduce on main: a project whose index.html references
../../.ssh/id_key through <link href>, <a href> and url(), with a project
link to a file in .ssh, rendered locally, gets those files copied into
compiled/hf-ext and served.
Comment lines: the four in studio-server's outsideFile.ts moved verbatim from
the CLI files they replace. Two are new, in utils/paths.ts. The one on
outsideAssetRefusal states the policy once, so its six call sites carry no
comment. The one on refusesOutsideLink says its boolean means "refused, and
already warned", which the name alone does not say. Comment ratchet is clean.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): keep outsideFileType as a re-export of the shared module
The base repository's deletion guard rejects removing a file that exists on
main unless git pairs it as a rename. outsideFileType.ts moved into
studio-server/outside-file with enough added around it that git no longer
pairs the two, so CI's "Reject accidental file deletions" step failed.
The file stays as a two-name re-export and publish keeps importing from it,
so publishProject.ts and its file-type test are back to main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* chore(producer): raise the unpacked size budgets for the outside-file policy
CI's packed-manifest check measured @hyperframes/producer at 3,244,665 bytes
unpacked (budget 3,210,000) and @hyperframes/studio-server at 653,506
(budget 646,000), both just past the 1% tolerance.
Both packages were already at the edge on main. Measured locally with
npm pack --dry-run, main is 3,237,162 for producer and 652,502 for
studio-server, so studio-server on main is already at its ceiling. This
branch adds about 7.9 KB unpacked to producer, because the new checks sit in
the compiler, render stages and file server, which each producer entry
bundles. It adds about 5.5 KB to studio-server for the new outside-file
entry and its declarations. No source maps, tests or assets were added to
either tarball.
The budgets go to 3,245,000 and 654,000, just above CI's measurements, the
same way #7579 raised producer's budget for the project-folder checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(producer): apply the outside-file policy to embedded local fonts
A project font file that links outside the project is now left out of
font embedding with the same warning the file server gives, instead of
being inlined into the compiled HTML.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(studio): a file held open or read-only answers 423 or 403 with a reason, not 404 or 500
* fix(studio): valid workflow name for the Windows held-file test
* test(studio): release the held file before the held-file test removes its folder
* fix(studio): the code editor's save toast names a held or read-only file
* fix(cli): copy only media, font, CSS and JS files from outside the project
Publish, cloud render and feedback now copy an outside reference into _ext/
only when its extension is an image, video, audio, font, CSS or JS type,
taken from studio-server's MIME map (new ./mime subpath; .avif added).
Anything else outside the project is left out with a warning and a
left_out entry whose reason is file_type; telemetry counts it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): keep the new outside-type file under its package's comment share
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): copy the outside media cloud render re-encodes or converts
The outside allowlist now also takes the video, audio and still-image
extensions cloud render re-encodes or converts (.avi, .ogv, .aiff, .tif,
.bmp and the rest), from one shared list offload imports too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* feat(studio): record the layer name on each history entry's target
* feat(studio): record the clip's name on timeline move and resize entries
* chore(studio): drop doc comments the names already carry
* chore: release v0.9.37
* docs(release): add #7576 to v0.9.37 notes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* chore: release v0.9.35
* docs(release): note the render stop and container 403 from #7563 in v0.9.35
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix: track local Studio sharing CTA intent
* fix: tag local Studio and CLI share upgrade links with where they came from
The local Studio share modal's Upgrade to Pro link opens
/pricing?from=cli&entry=local_studio_share, and hyperframes share's source-files
notice links /pricing?from=cli&entry=cli_share, so the pricing page can tell
which link a visit came from and return the visitor to their terminal. The
modal accepts its own pricing page with any query, still only on
hyperframes.dev's two origins. share_upgrade_clicked carries
cta=share_modal_upgrade.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* refactor: name the local Studio upgrade CTA and drop the explaining comments
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix: keep the local Studio upgrade link's return page unchanged
Only entry=local_studio_share is added to the local Studio share window's
Upgrade to Pro link. from=cli would have told these buyers to go back to their
terminal after checkout, but they return to a browser tab. hyperframes share's
link keeps from=cli, as the CLI's other upgrade links do.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(core): keep git metadata and env files out of bundled HTML
The bundler now checks every file it reads against the project's private
paths (git metadata and env files, spelled directly or through a link)
and leaves a refused reference as authored instead of inlining it.
Bundle options gain a canRead predicate; Studio's preview passes its own
private-file rule so the preview document matches what the file routes
serve.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(studio-server): check capture read grants against the decoded path
A capture page's read grant now looks at the path the way the static
preview route decodes it, including encoded separators, so a URL that
resolves to a dotfile or into a dot-folder gets no CORS grant. Ordinary
project files keep loading in thumbnails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): accept local share requests only from loopback connections
The local share routes already require loopback Host and same-origin
headers. They now also require the connection itself to come from this
machine, so a Studio bound to a network address still keeps sharing
local to the person running it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(studio-server): ask the bundler for Studio's private-file rule as plain data
The preview route passed a fresh `canRead` callback on every build. A host that builds on a
worker thread cannot send a function across, so it built on its own thread, and it could no
longer share one build between two same-content requests.
The bundler now takes `privateFiles: "studio"`, a plain string, and applies Studio's
private-file rule itself. That rule (git metadata, env files, and the app's records under
`.hyperframes/`) now lives in `@hyperframes/core/safe-path`, and studio-server reuses it.
The `canRead` option is removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(studio-server): do not serve a preview main file linked to a private file
When index.html (or <id>.html) is a link to an env file or into git metadata, the
bundler refuses it and the route falls back to reading the main file from disk. That
fallback now skips a candidate that is a private project file, by the same rule the
file routes use. A main file linked from outside the project is still served.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(producer): never inline git or env files as render sub-compositions
The render compiler resolved data-composition-src and inlined the file it named, so
`data-composition-src=".env"` put the env file's text into the render page. It now
refuses git metadata and env files with the same shared rule the bundler uses. The
pre-render check names the refused reference and stops the render.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* chore: raise the inspector unpacked size budget to 3,722,000 bytes
The inspector already sat about 36.8 KB over its 3,684,092 budget, just inside the 1%
tolerance. Moving Studio's private-file rule into core added a few hundred bytes to the
bundles it ships, which pushed it to 3,721,419 bytes and over the tolerance.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(studio-server): let opaque preview frames load project fonts and module scripts
A preview framed with an opaque origin, such as the Compositions hover
preview, makes its font and module-script loads in CORS mode with
`Origin: null`. Without a CORS grant they failed: the frame fell back to a
system font and module scripts never ran.
The preview asset route now answers those two loads with
`Access-Control-Allow-Origin: null`, `Vary: Origin` and
`X-Content-Type-Options: nosniff`. The grant is chosen by `Sec-Fetch-Dest`,
which the browser sets and page script cannot: `font` for a font file and
`script` for a .js/.mjs file, served with the matching content type. A
page's own `fetch()` is always `empty`, so it still gets no grant and
composition script still cannot read project files.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* refactor(studio-server): keep opaque-frame grant comments within the package share
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(studio-server): let opaque preview frames load project fonts
Narrow the opaque-frame grant to fonts. Every sandboxed frame sends the
same `Origin: null` and fetch metadata, so a CORS grant for module
scripts could not be limited to frames the Studio itself serves. Module
scripts stay unloaded in the hover preview for now; fonts keep their
grant, and `Sec-Fetch-Dest: script` loads of .js/.mjs get none.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(studio-server): load fonts and modules only in the Studio's own preview frames
A CORS grant to `Origin: null` reaches every sandboxed frame, whichever
page it sits in. The grant now lives on a per-project path instead:
`/projects/:id/preview/~<token>/...` serves exactly what `/preview/...`
serves, and only there do font loads (`Sec-Fetch-Dest: font`, a font file
served as `font/*`) and module-script loads (`script`, a .js/.mjs file
served as `text/javascript`) from an opaque frame get
`Access-Control-Allow-Origin: null`. The plain path gets no grant.
The token is an HMAC-SHA256 of the project id under a random per-server
secret, compared in constant time. The Studio reads it from
`/projects/:id/frame-token`, which refuses cross-site and same-site
requests, and the Compositions hover preview frames its composition at
the token path. Documents served there are re-based under the token and
carry `Referrer-Policy: no-referrer`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* chore(studio-server): raise the packed size budget for the preview frame tokens
The per-project frame-token path adds server code to the package, and the
packed tarball measured 166941 bytes in CI against a 164800 budget. Set the
budget to the measured size plus about 1% headroom.
— Rames Jusso
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli,parsers): take helper programs only from install locations, never the project folder
FFmpeg, FFprobe, whisper-cli, parakeet-mlx, Python and system Chrome are now
found through one shared rule: an absolute PATH entry outside the working
directory, or a fixed install dir. A relative PATH entry and any folder
inside the working directory are skipped, on every platform. Windows walks
PATH itself instead of asking `where`, which lists the working directory
first.
FFmpeg discovery no longer falls back to `.hyperframes/bin` or to an
installer package in the project's node_modules; an installer package
installed next to HyperFrames still works. The env overrides are unchanged.
The CLI skill reference stops suggesting the project-local folder.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(cli): give the PATH-lookup tests a fixed PATH on Windows
Windows now walks PATH instead of running `where`, so tests that faked
`where` output found the runner's real python and cmake. Both tests now set
PATH to a temp folder holding only the programs they expect.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix: report a missing helper program instead of running it by bare name
When no trusted FFmpeg or FFprobe is found, the engine, the producer's
probes and Studio's waveform, peak and audio-track helpers now report
"not found" with the HYPERFRAMES_FFMPEG_PATH / HYPERFRAMES_FFPROBE_PATH hint
instead of handing the bare name to the OS lookup. Callers that degraded
on a missing binary still do: runFfmpeg returns a spawn_error result, the
GPU and version probes report none, and Studio's audio helpers fail soft.
The Lambda handler names its bundled ffmpeg and ffprobe by path, since
they live under the task root, which is the working directory.
brew, git and cmake for the whisper.cpp install, and the clipboard tool
for `hyperframes add`, run by the absolute path the trusted lookup
approved. The media-use engine gets a PATH holding only trusted folders.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(engine): fail a missing FFmpeg the way a failed spawn always has
Throwing from getFfmpegBinary turned every caller's missing-binary path
into a synchronous throw: the streaming encoder's "failure result, not a
throw" contract broke, and unit lanes that run without FFmpeg crashed at
module load. With no trusted copy the getters now return an absolute path
inside HyperFrames' own install that is never created, named for the
override to set. Spawning it fails with ENOENT exactly as before, and the
OS still never looks the bare name up. The call-site guards and fixture
changes that the throw needed are reverted.
The whisper install tests match git and cmake by name and skip the brew
case on Windows, where the lookup walks the real PATH.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(engine): pin the found FFmpeg before the HDR test looks it up as macOS on Windows
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(core): fall back to a direct write when link() is denied with EACCES
On Android app data (Termux, SELinux enforcing), link(2) fails with
EACCES in a folder the temp file was just written to. createFileAtomically()
and the studio history owner lock treated that as fatal, so
`hyperframes init` left a half-scaffolded project and every render logged
a recordRenderSuccess failure. Both now take their existing exclusive
direct-write path, as they already do for EPERM.
Fixes#7473
* fix(share): treat EACCES as no hard links in the project share lock
Same Termux/SELinux link() denial as core and the studio history lock:
the share lock's link-then-exclusive-create fallback now covers it too.
Folds the Android note into the existing comment so no file's comment
share rises.
* fix(cli,studio-server): limit registry installs and Studio file writes to project content folders
Registry blocks and components now install only into the project's
compositions, components and assets folders (plus models/ and lib/, which
the catalog uses, and notes at the root). node_modules, agent instruction
files and programs or scripts are refused at any depth, matched
case-insensitively with either separator, and checked again on the path
the project's own links lead to.
Studio's file routes never read or write git metadata or env files, and
every route that writes, renames, deletes, copies or uploads a
request-named path refuses the project folder itself, node_modules and
hidden files or folders other than .hyperframes/ and .media/, on both the
spelled and the link-resolved path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* chore(cli,studio-server): trim comments added by the write allowlist
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli,studio-server): trim path segments in linear time
The trailing dot/space and :stream trims used anchored regexes that
backtrack quadratically on long runs of spaces, dots or colons in a
request path. Trim with a plain scan instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(cli): refuse example dependencies in add and allow only TEMPLATE.md at the root
- addToProject now refuses a block or component that depends on an example,
not only an example asked for by name. The installer lets an example write
at the project root, so a dependency must not carry that through.
- The only file a block may write at the project root is TEMPLATE.md, the
catalog's usage note. Any other .md or .txt name could be one a tool loads.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(studio-server): run thumbnail captures in an opaque origin
The thumbnail renderer loads each composition as a top-level page, so its
scripts ran on the Studio's origin. The capture document (`?hf-capture`) now
carries `Content-Security-Policy: sandbox allow-scripts`, so those scripts get
an opaque origin.
An opaque page's CORS-mode loads fail without a CORS header. The renderer that
opened the page is trusted, so it adds `Access-Control-Allow-Origin: null`
itself, over that page's own DevTools session, to the loads a frame needs:
- fonts, module scripts and images;
- the `.html` scenes, `.json` and `.cube` files the runtime fetches.
Only GETs of the project's preview files qualify, matched by file type. Both
thumbnail renderers do this: the CLI's and the Vite dev server's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(studio-server): let an opaque capture wait for a video's preview copy
A video the browser cannot decode is drawn from its `?hf-proxy=` copy. The
runtime waits for that copy with a ranged fetch, preflighted when it carries
the priority header. In the opaque capture page both failed, so each such
thumbnail fell back to a still after about five seconds of retries.
The renderer now answers that preflight itself. It also exposes the copy's
status headers to the wait, for video files under the preview path only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* refactor(studio-server): keep capture-load comments within the package share
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(studio-server): keep video pixels and project fetches in opaque thumbnail captures
- Media loads: the renderer now grants them, and a capture document loads the
project's own videos with `crossorigin="anonymous"`. Color grading and shader
textures can then read their pixels.
- Fetches: every GET of the project's preview files is granted, except a dotfile
or dot-folder path such as `.env` or `.git/`. This covers the models and fonts
that registry blocks fetch at runtime.
- Opt-in: the capture sandbox is now a `createStudioApi` option,
`sandboxThumbnailCaptures`, off by default. The CLI Studio server and the Vite
dev server turn it on, because their thumbnail renderers install the grant.
Another app keeps its current capture documents until its renderer does the
same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(shader-transitions): prepare transitions when IndexedDB is denied
An opaque-origin document, such as a sandboxed preview or thumbnail capture,
has no IndexedDB, and opening it throws. The snapshot cache now treats that
as no cache, so the transitions still prepare and draw.
Thumbnail captures also grant a CORS read of a missing preview file, so a
fetch() sees its status as a same-origin page would.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(studio-server): leave a video with another host's <source> out of capture CORS
A video whose <source> child points to another host now keeps its plain
load in a thumbnail capture. Adding crossorigin to it would make a CDN
that sends no CORS headers refuse the video, leaving the clip blank.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* feat(cli): share rendered videos through unified reviews (#7135)
* feat(share): attach editable project sources to reviews (#7137)
* feat(share): measure local sharing outcomes (#7138)
* feat(cli): stage the sixty-day publish transition (#7136)
* feat(studio): share review pages from local preview (#7140)
Advertise the CLI sharing bridge before bootstrapping it so standalone Studio does not
request unsupported routes. Preserve origin and session checks.
Budget the intended sharing artifact: clean main packs at 8,060,519 bytes versus
8,162,979 with sharing (8,169,168 in CI). Required policy and Unicode tables, bundled
sharing code, and Studio controls account for the growth. Set the packed-only budget
to 8,577,627, following the 5% headroom convention; retain the unpacked cap and all
package checks.
* fix(share): persist refusals and improve CLI retry feedback
* fix(ci): restore render diagnostics and include sharing workspace
* fix(cli): keep sharing owner error codes stable
* fix(share): clarify update feedback and align audience changes
* fix(share): clarify updates and avoid scratch-file rerenders
* fix(cli): report active shares and preserve update channels
* fix(cli): resolve update channel when checking registry
* fix(ci): refresh sharing package budgets after rebase
* fix(share): require consent before uploading project files
* feat(engine): decouple transparent background from png capture format
PNG capture used to imply a cleared page background. A new
CaptureOptions.transparentBackground lets lossless opaque PNG capture
(4:4:4 MP4 output) keep the page background. Absent, it still follows
format === "png", so alpha output and motion blur are unchanged.
Opaque PNG skips drawElement, whose verification and worker-encode
paths are JPEG-only.
Refs #5555
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* feat(engine): add 4:4:4 chroma option to getEncoderPreset
getEncoderPreset takes an optional chromaSubsampling ("420" by
default). "444" returns yuv444p for SDR MP4, so libx264 encodes the
High 4:4:4 Predictive profile and odd sizes need no even padding.
WebM, MOV and HDR presets ignore it. The ChromaSubsampling type is
exported for the producer.
Refs #5555
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* feat(producer): chromaSubsampling render option with lossless png capture
RenderConfig.chromaSubsampling ("420" by default) opts an SDR MP4
render into 4:4:4. "444" encodes libx264 yuv444p and captures every
frame as opaque PNG: Chrome's quality-100 JPEG is already 4:2:0 on
beginFrame and screenshot capture, and drawElement can fall back to
screenshot mid-render, so PNG is the only capture that keeps the
colour. drawElement is turned off for these renders.
The probe and main capture options share resolveCaptureSurface, so
they cannot disagree on format, quality or background.
Formats other than mp4, GPU encoding and HDR output are rejected
before any work starts, auto-detected HDR sources fail before capture,
and distributed requests refuse 444. The default render is unchanged.
Refs #5555
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* feat(producer,studio-server): accept chromaSubsampling on render routes
The shared parseEncoderOptions validates chromaSubsampling and answers
400 for "444" with a non-mp4 format, gpu, or force-hdr, so a request
that would come back 4:2:0 never starts a render. The Studio render
route, both Studio adapters and the producer HTTP server forward it.
The producer server also refuses "444" with outputDynamicRange "hdr",
which parseEncoderOptions cannot see.
No Studio UI control; the option is route-level like crf and hdrMode.
Refs #5555
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* feat(cli): add --chroma-subsampling flag
`hyperframes render --chroma-subsampling 444` opts an SDR MP4 render
into full-resolution chroma (yuv444p with lossless PNG capture). The
default stays 420. The plan rejects 444 with a non-mp4 format, --gpu
or --hdr before anything renders, with a usage error that names the
conflicting flag.
The value reaches the local render request and, only when it is 444,
the Docker argv, so default Docker invocations are unchanged.
Refs #5555
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs: document 4:4:4 chroma subsampling
Add a "4:4:4 masters" section to the rendering guide: when to use
--chroma-subsampling 444, why it captures PNG, the measured chroma gain
(large for text and UI, none for footage and gradients), its limits,
and a player compatibility table to be filled in from testing.
Document the flag in the CLI reference, the built-in rendering docs and
the hyperframes-cli skill reference (with the regenerated skills
manifest), and the chromaSubsampling option in the producer docs.
Refs #5555
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs: add 4:4:4 player compatibility results
Fill the 4:4:4 compatibility table from testing H.264 High 4:4:4
Predictive output. Chrome 155, Edge 155, VLC 3.0, Safari on iOS 26.6
and Safari 26.6 on macOS play it, and so does AVFoundation on macOS
26.6, the framework QuickTime Player plays through. Firefox 157 on
Windows and both Windows media players do not.
Refs #5555
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs: note the measured render cost of 4:4:4 output
Replace the vague "slower capture" note with measured numbers: a text
and UI composition rendered in about twice the default time, full-frame
footage in about three and a half times, because PNG encoding cost grows
with image detail.
Refs #5555
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(producer): reject chromaSubsampling 444 in distributed render config
Distributed configs have no chroma field and validateDistributedRenderConfig
ignored unknown keys, so a JS caller passing chromaSubsampling: "444" to the
Lambda or Cloud Run SDK got a 4:2:0 file with no error. Reject it, and make
the rendering guide say so precisely.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(producer): check a 444 render reaches the encoder as yuv444p
Every helper had tests, but nothing checked the orchestrator passes
chromaSubsampling through, so dropping it from the encoder preset or capture
surface would turn 444 renders back into 4:2:0 with all tests green. Render a
small fixture with "444" and with the default and check pix_fmt with ffprobe.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* refactor(producer): move the 444 drawElement gate into a helper
Keeps runCompileStage under the fallow complexity threshold.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* chore: keep comment share at or below the merge-base
comment-ratchet failed on 11 files this PR touched. Keep the 4:4:4
rationale once in chromaSubsampling.ts, move the distributed-render
reason into its error message, and cut the rest.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(producer): check a 444 render captures full-resolution chroma
The encoder check alone passes when chromaSubsampling is dropped from the
capture surface: frames are captured as JPEG and encoded yuv444p with
4:2:0 colour. Put a red/blue edge at an odd x, inside a 4:2:0 chroma
pair, and require the two pixels to differ in Cb.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* chore(producer): trim the chromaSubsampling.ts header to the package comment share
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix: finish switching to capturesAlpha from #6262
The merge that adopted main's transparent / capturesAlpha left these files
uncommitted, so resolveCaptureSurface still returned transparentBackground.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* refactor(engine): use transparent / capturesAlpha from #6262
main added CaptureOptions.transparent and capturesAlpha (#6262), which do
what this PR's transparentBackground did. Use them, keep the PNG check in
drawElementWorkerEncodeEligible, and re-pin test-classification.mjs and
the skills manifest against current main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* chore(producer): cut the 4:4:4 comment blocks to one to three lines
The reasoning lives in the PR description with the measurements.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* refactor: reconcile 4:4:4 chroma with latest main
Keep main's video-layer capture overrides, template entry resolution,
ProRes profile parsing and blur-differential tests alongside the chroma
option, and fold the encoder sub-parsers into one loop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* chore: keep main's compile-stage tests and regenerate the skills manifest
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>